长江口深水航道数学模型信息系统研究   总被引：3，自引：0，他引：3  

童朝锋  林跃华等 《海洋工程》2003,21(1):101-104

利用GIS二次开发软件ArcView，完成数学模拟所需的计算网格生成及线边界法中地形数据提取的优化。集成ArcView、Visual Basic及长江口潮流数学模型，实现了数值模拟计算成果的三维可视化及实时互动的动态演示。所开发的长江口数学模型信息系统能根据整治工程需要，提交各类工程数据库。  相似文献   

The morphodynamic modelling of tidal sand waves on the shoreface     

P.K. Tonnon  L.C. van Rijn  D.J.R. Walstra 《Coastal Engineering》2007

An artificial sand wave on the Dutch shoreface of the North Sea has been studied in conditions with relatively strong tidal currents in the range of 0.5 to 1 m/s and sediments in the medium sand size range of 0.2 to 0.5 mm. The sand wave is perpendicular to the tidal current and has a maximum height and length of the order of 5 m and 1 km, respectively. The sand wave is dynamically active and shows migration rates of the order of a few metres per year. A numerical morphodynamic model (DELFT3D model) has been used to simulate the morphological behaviour of the sand wave in the North Sea. This model approach is based on the numerical solution of the three-dimensional shallow water equations in combination with a surface wave propagation model (wind waves) and the advection–diffusion equation for the sediment particles with online bed updating after each time step. The model results show that the sand wave grows in the case of dominant bed-load transport (weak tidal currents; relatively coarse sediment; small roughness height; low waves) and that the sand wave decays in the case of dominant suspended transport (strong currents, relatively fine sediment, large roughness height; storm waves).  相似文献   

Optimization Mathematical Model of Pile Forces for Offshore Piled Breasting Dolphins     

周锡礽  王乐芹王晖 朱福明 《中国海洋工程》2004,18(4):567-575

An optimization mathematical model of the pile forces for piled breasting dolphins in the open sea under various loading conditions is presented. The optimum layout with the well distributed pile forces and the least number of piles is achieved by the multiplier penalty function method. Several engineering cases have been calculated and compared with the result of the conventional design method. It is shown that the number of piles can be reduced at least by 10%—20% and the piles‘ bearing state is improved greatly.  相似文献   

Discussion: A review on the behaviour of helical piles as a potential offshore foundation system     

Shah Neyamat Ullah  Yuxia Hu 《Marine Georesources & Geotechnology》2020,38(9):1121-1127

Abstract

Helical piles have emerged as an attractive foundation system for offshore applications with renewed interest from the offshore community. Significant research gap currently exists in transferring this technology offshore and this paper discusses how existing and emerging knowledge can be successfully used to bridge some of the gaps. We focus on the Coupled Eulerian Lagrangian (CEL) large deformation finite element (LDFE) modelling technique that is commercially available and can be used to model the three-dimensional installation process with consideration of strain rate and softening effects in soft offshore clays. A helical pile of L?=?7.5?m long is modelled with one or two large-diameter helices (D?=?2?m) attached to a central shaft of d?=?0.5?m in diameter.The net effect of strain rate and softening is to increase the installation torque. The measured torque is within the range of 200–400?kN.m for the offshore clay and the pile geometry studied. Additional helices increase the uplift force but to a lesser degree than that of the measured torque. Remoulding induced strength reduction is found to be within the range of 25–33% of the intact clay strength. Issues of extracting and reusing offshore helical pile foundations are discussed.  相似文献   

海洋调查数据的可视化建模及实现方法     

孙菁  杨冠杰 《中国海洋大学学报(自然科学版)》2001,31(4):579-585

科学计算可视化作为新一代的分析工具 ,正在进入物理海洋学领域。文中介绍对海洋调查数据进行可视化的关键问题——数据建模 ,并从分析海洋调查数据的特点出发提出针对海洋研究中可视化建模的原则和有效途径 ,给出相关的实现方法。其中 ,重点讨论局部体样条建模中必须面对的区域分割优化问题 ,引入遗传算法并给出较好的解决方案。  相似文献   

The petroleum evaluation of a tectonically complex area: The western margin of the Southeast Basin (France)     

A. Mascle  R. Vially  E. Deville  B. Biju-Duval  J.P. Roy 《Marine and Petroleum Geology》1996,13(8):941-961

The Southeast Basin of France is the thickest onshore French sedimentary basin which contains locally as much as 10 km of Mesozoic-Cenozoic sediment. Basin development occurred in several stages between late Carboniferous and late Cretaceous times. Partial tectonic inversion took place during two compressive events, the so-called ‘Pyrenean’ and ‘Alpine’ phases of late Cretaceous-early Tertiary and late Tertiary ages respectively. They are separated by an intervening stretching event of Oligocene age, which further south resulted in the opening of the western Mediterranean oceanic basin. As a result of this complex tectonic history, structural traps were difficult to image on the seismic data shot during the first phase of exploration prior to 1980. Oil and gas natural seeps, and shows in several wells, indicate that some petroleum systems are, or have been active, at least in some places.The present erosional western margin of the basin is more or less superimposed on the initial Triassic-Jurassic margin. Margin subsidence and Tertiary inversion are discussed using regional sections on which the polyphase history of the entire basin is well shown. These sections are located on three major segments where the Mesozoic margin is either partly preserved (Ardèche), or has been partly inverted in late Tertiary times (Vercors-Chartreuse), or has been completely inverted in early Tertiary times (Corbières-eastern Pyrenees). 1-D ‘Genex’ basin modelling on the Ardèche segment, and 2-D ‘Thrustpack’ structural-maturity modelling in the Vercors-Chartreuse segment are used to further assess the remaining petroleum plays.  相似文献   

Analysis, synthesis and modelling of high-resolution observations of salt-marsh eco-geomorphological patterns in the Venice lagoon   总被引：1，自引：0，他引：1  

Marco Marani  Enrica Belluco  Sergio Ferrari  Sonia Silvestri  Andrea D'Alpaos  Stefano Lanzoni  Alessandra Feola  Andrea Rinaldo   《Estuarine, Coastal and Shelf Science》2006,69(3-4):414

The present paper describes observations, analyses and models of salt-marsh channel network and vegetation patterns with the aim of contributing to the development of predictive models of ecological and morphological co-evolution. Existing and new observations are described, with particular emphasis on remote sensing and ancillary field surveys, which are shown to allow reliable, accurate and repeatable quantitative characterizations of landform and vegetation properties over the spatial scales of interest. The observed channel network morphological characters are then used as the basis and validation of models describing the emergence of channel network and vegetation spatial patterns. In particular, with reference to observations performed in the Venice Lagoon, the note describes: (i) new, 2-cm resolution, characterizations of channel network geometry obtained from “proximal sensing” photographic observations; (ii) the reliable quantitative maps of salt-marsh vegetation which may be retrieved from hyperspectral remote sensing data and field ancillary observations; (iii) a synthesis of recent and new analyses of the statistical properties of vegetation and landform spatial organization, that may be inferred from the maps so derived; (iv) recent and new conceptual and quantitative ecological and geomorphic models developed and validated by remote-sensing and field observations. A coherent observational and theoretical eco-morphodynamic framework is then proposed.  相似文献   

Investigation and sensitivity analysis of a mechanistic phytoplankton model implemented in a new modular numerical tool (Eco3M) dedicated to biogeochemical modelling   总被引：2，自引：0，他引：2  

Melika Baklouti  Vincent Faure  Lionel Pawlowski 《Progress in Oceanography》2006,71(1):34-58

A new class of phytoplankton models with a mechanistic basis has been presented in a companion paper (Baklouti, M., Diaz, F., Pinazo, C., Faure, V., Queguiner, B., 2006. Investigation of mechanistic formulations depicting phytoplankton dynamics for models of marine pelagic ecosystems. Progress in Oceanography). It is the default class of models implemented in our new numerical tool Eco3M, which is dedicated to Ecological, Mechanistic and Modular Modelling. A brief overview of its main features is given in Section 2 of the present paper. In the next sections, a particular phytoplankton model among the aforementioned class has been tested with special emphasis on the mechanistic photosynthesis component relating the photosynthetic rate to the proportion of open photosystems II. The present study encompasses several essential steps that are inherent to any modelling, including model reduction, model sensitivity analysis and comparison of model outputs with experiments. The global sensitivity analysis of the plankton model for one-at-a-time parameter perturbations revealed a restricted set of parameters having major influence on the model outputs. Sensitivity tests involving simultaneous parameter perturbations within the range actually encountered in the literature provided a confidence interval for the outputs. Chemostat experiments performed on nitrate-limited diatoms grown under low (LL) and high-light (HL) conditions have been used for comparison with model outputs. The good fit between measured data and model outputs using the same parameter values in both the LL and HL cases demonstrates the ability of our model to represent the main features of phytoplankton dynamics including photoacclimation. Finally, Eco3M is ultimately intended to include explicit bacterial and zooplankton compartments, as well as to be coupled with ocean circulation models, but the intrinsic behavior of the phytoplankton model has been investigated first, independently of physical forcing.  相似文献   

A Sensitivity Analysis of the Waterline Method of Constructing a Digital Elevation Model for Intertidal Areas in ERS SAR scene of Eastern England   总被引：1，自引：0，他引：1  

D. C. Mason  I. J. Davenport  R. A. Flather  C. Gurney  G. J. Robinson  J. A. Smith 《Estuarine, Coastal and Shelf Science》2001,53(6):759

A sensitivity analysis of the waterline method of constructing a Digital Elevation Model (DEM) of an intertidal zone using remote sensing and hydrodynamic modelling is described. Variation in vertical height accuracy as a function of beach slope is investigated using a set of nine ERS Synthetic Aperture Radar (SAR) images of the Humber/Wash area on the English east coast acquired between 1992 and 1994. Waterlines from these images are heighted using a hydrodynamic tide-surge model and interpolated using block kriging. On 1:500 slope beaches, an average block height estimation standard deviation of 18–22 cm is achieved. This rises to 27 cm on 1:100 slope beaches, and 32 cm on 1:30 slope beaches. The average heighting error at different slopes is decomposed into components due to waterline heighting error, inadequate sensor resolution and interpolation inaccuracy. It is shown that, at 1:500 slope, waterline heighting error and interpolation inaccuracy are the main error sources, whilst at 1:30 slope, errors due to inadequate sensor resolution become dominant. The ability of the technique to generate intertidal DEMs for almost the entire coastal zone in a complete ERS SAR scene covering 100×100 km is demonstrated.  相似文献   

Data assimilation for a coastal area morphodynamic model: Morecambe Bay     

T.R. Scott  D.C. Mason 《Coastal Engineering》2007

This paper investigates the use of data assimilation in coastal area morphodynamic modelling using Morecambe Bay as a study site. A simple model of the bay has been enhanced with a data assimilation scheme to better predict large-scale changes in bathymetry observed in the bay over a 3-year period. The 2DH decoupled morphodynamic model developed for the work is described, as is the optimal interpolation scheme used to assimilate waterline observations into the model run. Each waterline was acquired from a SAR satellite image and is essentially a contour of the bathymetry at some level within the inter-tidal zone of the bay. For model parameters calibrated against validation observations, model performance is good, even without data assimilation. However the use of data assimilation successfully compensates for a particular failing of the model, and helps to keep the model bathymetry on track. It also improves the ability of the model to predict future bathymetry. Although the benefits of data assimilation are demonstrated using waterline observations, any observations of morphology could potentially be used. These results suggest that data assimilation should be considered for use in future coastal area morphodynamic models.  相似文献