生物去除地下水中硫酸盐的实验研究   总被引：1，自引：0，他引：1  

张宏涛  翟辉 《地下水》2005,27(1):19-22

使用平皿夹层厌氧法分离得到纯化的硫酸盐还原菌,通过对比封口、敞口两种情况下细菌培养过程中产生的现象和细菌的生长曲线,表明SRB并非严格的厌氧菌,能耐受一定浓度的环境溶解氧.将该菌用于去除溶液中的SO42-,发现SRB在还原SO42-的过程中,随着SO42-去除率的增加,溶液的pH值会减小,而当SO42-去除率降低时,溶液的pH有增加的趋势;COD/SO42-比值对SO42-的去除率有很重要的影响,在封口情况下,COD/SO42-=0.75时SO42-的最大去除率约为48.60%,COD/SO42比值增加至2.5时,SO42-最大去除率可以达到89.72%,要达到SO42-高去除率,必须增加COD/SO42-比值.  相似文献   

环境矿物材料治理镉（Cd^2＋）污染研究进展   总被引：4，自引：0，他引：4  

商平  王丽娜 《岩石矿物学杂志》2005,24(6):681-685

近年来,环境矿物材料以其经济、有效、无二次污染等特点,在重金属废水处理和土壤修复方面显示出了众多优势,可替代传统的镉污染处理方法。本文综述了国内外环境矿物材料在处理镉污染方面的研究进展,并对今后应用环境矿物材料治理镉污染提出了一些建议。  相似文献   

河南省平顶山盐田盐矿床成矿特征探讨     

姜敏德  沈佩霞 《中国煤田地质》2005,17(4):12-14

以现有钻孔及区域资料为基础，对平顶山盐田盐矿床形成的构造条件和盐湖的沉积模式、沉积类型成矿物源进行了分析，为平顶山盐田的进一步勘查和开发提供了宝贵资料。  相似文献   

原料收购信息管理系统的设计与实现     

郑国宏  张春雷 《沙漠与绿洲气象(新疆气象)》2005,28(1):26-27

利用数据库相关知识对原料收购业务进行合理的规划、分析与设计，充分利用计算机处理、网络通讯技术，将电子衡与微机系统相连，利用RS232通讯标准将称重数据读入微机，并及时处理、结算、统计、查询、输出，建立一套完整的网络化数据库管理系统。目的是解决原料过磅手工记帐的传统方式，以便快速准确完成原料收购业务，从而达到节约劳动力、提高工作效率的目的。  相似文献   

旋转流地转适应过程与能量转换规律     

Fang Juan  Wu Rongsheng 《大气科学进展》2002,19(5):845-854

利用一维线性浅水模式从一个比较普遍的角度对地转适应过程中能量转换的特点进行分析。中首先考虑了两类不同的初始不平衡流的适应问题。一个是Gill所采用的质量不平衡模型，即初始场是静止的，只有水面扰动；另一个是Rossby中所考虑的动量不平衡模型，其初始不平衡流中只有风场的扰动，对这两个模型的适应过程而言，一个显的 特点就是能量转换率始终不会大于1／2或小于0，即适应过程中有位（动）能的释放和向动（位）能的转换，但释放出的能量最多只有其中的一半可以保留在最后的平衡场中。另外，本对任意初始不平衡流适应过程中的能量学特征也进行了分析，指出对于偏差场（相对于一定基本态）的动能和位能而言，上述能量转换关系依然成立。  相似文献   

隧道塌方的尖点灾变模型及应用   总被引：8，自引：0，他引：8  

刘贵应  刘新喜  魏新颜 《地质灾害与环境保护》2002,13(2):59-62

针对隧道塌方失稳问题，运用灾变理论建立隧道塌方失稳的尖点灾变模型。基于平衡曲面方程，可求得隧道围岩体内承载区介质刚度与对应的松驰区弱化介质本构曲线拐点处理刚度之比值K，并给出了塌方与否的判据，当K≤1时，隧道将发生塌方失稳；当K＞1时，隧道将不会发生塌方失稳。根据此模型，笔者解释了隧道中几种常见的灾变破坏机理，并提出了相应的治理方案。  相似文献   

A mathematical hysteretic model for elastomeric isolation bearings     

J. S. Hwang  J. D. Wu  T.‐C. Pan  G. Yang 《地震工程与结构动力学》2002,31(4):771-789

An analytical model for high damping elastomeric isolation bearings is presented in this paper. The model is used to describe mathematically the damping force and restoring force of the rubber material and bearing. Ten parameters to be identified from cyclic loading tests are included in the model. The sensitivity of the ten parameters in affecting the model is examined. These ten parameters are functions of a number of influence factors on the elastomer such as the rubber compound, Mullins effect, scragging effect, frequency, temperature and axial load. In this study, however, only the Mullins effect, scragging effect, frequency and temperature are investigated. Both material tests and shaking table tests were performed to validate the proposed model. Based on the comparison between the experimental and the analytical results, it is found that the proposed analytical model is capable of predicting the shear force–displacement hysteresis very accurately for both rubber material and bearing under cyclic loading reversals. The seismic response time histories of the bearing can also be captured, using the proposed analytical model, with a practically acceptable precision. Copyright © 2002 John Wiley & Sons, Ltd.  相似文献   

纤维素接枝丙烯酰胺/高岭土高吸水性复合材料研究   总被引：26，自引：3，他引：26  

林松柏  林建明  吴季怀  肖春妹 《矿物学报》2002,22(4):299-302

在高岭土的存在下，以N，N－亚甲基双丙烯酰胺作交联剂，以硝酸铈铵为引发剂微晶纤维素与丙烯酰胺进行接枝共聚反应，合成接枝纤维素／高岭土高吸水性复合材料。研究了纤维素与单体的配比、高岭土添加量、交联剂用量、引发剂用量及反应温度对吸水率的影响。用红外光谱表征复合材料的结构，用电子显微镜观察复合材料的表面与界面。结果表明，高岭土在接枝聚合物中能较好分散，复合材料吸水率达1166，对生理盐水溶液的吸水率达86。  相似文献   

Fitness-for-Purpose of Reference Material Reference Values in Relation to Traceability of Measurement, as Illustrated by USGS BCR-1, NIST SRM 610 and IAEA NBS28   总被引：1，自引：0，他引：1  

Jean S. Kane 《Geostandards and Geoanalytical Research》2002,26(1):7-29

As in all fields of sample analysis, reference materials play a large role in supporting measurements in the geosciences. While a rather large number of materials are in distribution (> 380), not all are equally effective or fit-for-purpose in supporting laboratory data quality and thereby assuring the desired comparability of measurements between laboratories. Equally important, reference values that are not fit-for-purpose cannot be used effectively to establish traceability links between laboratory measurements and national and international standards. The needed fitness-for-purpose is not achieved for reference values either when more than one reference value has been proposed and a consensus does not exist among users as to which should be used by all, or when reference value uncertainties are too large in comparison to those of routine laboratory measurements. The focus of this review will be, first to outline the current reality, and second to suggest ways in which certifications of RMs can be improved to provide reference values that are universally accepted and more fit-for-purpose in general laboratory use. The discussion will be illustrated largely by current uses of USGS BCR-1, NIST SRM 610 and IAEA NBS28, as these three materials are those for which the largest body of newly published data exists, according to recent bibliographies of the geoanalytical literature published annually in Geostandards Newsletter: The Journal of Geostandards and Geoanalysis.  相似文献   

Preparation of a New Geological Survey of Japan Geochemical Reference Material: Coral JCp-1   总被引：2，自引：0，他引：2  

Takashi Okai  Atsushi Suzuki  Hodaka Kawahata  Shigeru Terashima  Noboru Imai 《Geostandards and Geoanalytical Research》2002,26(1):95-99

A new geochemical reference material, coral Porites sp. JCp-1 has been prepared by the Geological Survey of Japan (GSJ). Provisional values for twenty one major, minor and trace elements are presented. The homogeneity tests showed that all elements studied are considered to be homogeneously distributed.  相似文献