花岗岩残积土动态冲击性能的SHPB试验研究     

刘新宇  张先伟  岳好真  孔令伟  徐超 《岩土力学》2020,41(6):2001-2008

为研究花岗岩残积土的动态冲击性能,开展了高速冲击下的分离式霍普金森压杆（SHPB）试验,与常规应变率下的试验结果比较,分析了高应变率对花岗岩残积土的应力?应变特性和强度的影响。结果表明：低、高应变率下的花岗岩残积土的?-?a（轴向应力?轴向应变）曲线均呈现出软化型。随着应变率 增加,?-?a曲线向?a增大的方向移动,破坏应变?af增加。但高应变率下?af增加的程度更加明显。花岗岩残积土的峰值强度普遍具有应变率依赖性,二者可用直线关系拟合,但低、高应变率下的拟合关系并不一致。提出了率敏性因子m定量评价依赖性强弱。研究发现,随着应变率的提高,强度的应变率依赖性减弱,低应变率下的m为26.694,而高应变率下仅为0.013。相关试验结果指出,高速冲击荷载对土体总体有害。工程中应该采取合理措施控制冲击荷载的危害。该研究有助于深化花岗岩残积土动态冲击性能的理解,为相关工程的施工与设计提供技术参考。  相似文献   

土−水特征曲线测量过程中孔隙分布的演化规律探讨     

牛庚  邵龙潭  孙德安  韦昌富  郭晓霞  徐华 《岩土力学》2020,41(4):1195-1202

测量了在宽广吸力范围内原状样和压实样的脱湿持水曲线,对比分析了单双峰结构持水性能的差异;并利用压汞试验测试两种土样在脱湿过程的孔隙分布,分析了两者的差异并探讨了脱湿过程孔隙的演化规律;在考虑收缩变形的基础上,基于孔隙分布曲线确定了土?水特征曲线的基本参数。试验结果表明：原状样在宽广吸力范围内基本上呈单峰孔隙结构;饱和压实样具有单峰孔隙结构,随着吸力的增加,双峰结构越来越明显,当吸力达到很大时,演化成完全双峰孔隙结构。原状样的持水曲线为经典的S形,而压实样的持水曲线在过渡段出现了水平台阶状;低吸力段,压实样的持水曲线低于原状样,而高吸力段,两者的持水曲线基本重合。基于孔隙分布曲线确定了控制持水曲线进气值和残余值的孔径,并计算出对应的吸力值,其值更符合实际物理意义。  相似文献   

浙南花岗岩残积土物质结构及工程地质特性研究     

孙强  张泰丽  伍剑波  王赫生 《地质论评》2020,66(S1):163-166

  相似文献   

双步抗差估计及其应用     

刘兴春  仲健民  孙立军 《全球定位系统》2010,35(2):33-35

抗差估计是一种可以有效抵制粗差影响的平差方法。但权因子函数的临界值定值问题较为困难,若选取不当,会造成法方程系数阵秩亏或粗差观测值的影响未能完全消除,从而导致平差无法进行或抗差不彻底。针对上述问题提出了一种改进型抗差估计法一双步抗差估计法,并通过对一边角网和一实测GPS向量网进行的试算,验证了双步抗差估计的优越性。  相似文献   

A-10绝对重力仪残差谱分析     

赵珞成  罗志才  王东晓  王德征 《测绘科学》2010,35(1):47-49

自由落体式绝对重力仪A-10的测量数据拟合残差呈现出明显的周期信号,对4个测站的残差进行FFT处理,并进行频谱分析,结果表明残差组平均的频谱更加稳定,主峰频率与测站无关,主峰幅值与测站明显相关,加周期项改正的绝对重力值偏小。  相似文献   

基于CQG2000的吉林省西部地区似大地水准面的建立     

刘振宇  高炳浩 《测绘学报》2010,39(5):441-443

针对CQG2000精度无法满足实际工作的情况,提出一种新的重力似大地水准面与GPS水准的拟合方法—残差模型法,利用CQG2000、较密集的GPS水准点,采用残差模型法建立吉林省西部地区似大地水准面模型（JiLin West Quasi-Geoid,JLWQG）。论述建立JLWQG的三角剖分双线性内插算法及其适用性,检测结果表明,JLWQG精度达到了±0.05m,JLWQG在吉林省西部地区基础测绘更新工作中进行了大面积的应用,取得了满意的结果。  相似文献   

利用爆破事件分析不同速度模型下常规定位方法定位结果     

李兴泉  吴朋  唐淋 《地震地磁观测与研究》2020,(1):25-32

地震定位对速度模型的依赖性很强.四川地区地形复杂,常规工作中可选取多种速度模型进行定位.川西龙门山断裂带为东南部四川盆地和西北部青藏高原东部山区的明显分界线,近年在此断裂带上发生多次较大地震.对发生在该断裂带附近的6个爆破事件和15个天然地震重新定位,并对比结果.研究表明,相同台站包围情况下,川滇3D速度模型稳定性最好,但对浅表爆破不太准确.相比HypoSat(一维速度模型)组合,台站分布对Hypo2000(一维速度模型)和Hypo2000(赵珠速度模型)组合的定位结果影响较大.  相似文献   

结构震后残余位移研究进展          下载免费PDF全文

刘巴黎  胡进军 《世界地震工程》2020,(3):131-140

结构在强震作用下进入非线性阶段会产生不可恢复的永久位移或残余变形,结构残余位移是震后结构抗震性能和地震损失评估的重要参数,具有重要的理论意义和工程实用价值。为了深入分析残余位移的研究现状,为面向性态抗震设计和抗震韧性评估的地震动强度指标研究提供参考,全面和系统分析了国内外结构残余位移相关文献,介绍了残余位移的定义,重点论述了影响结构残余位移的主要因素,总结归纳了残余位移计算模型、残余位移控制方法及考虑残余位移的抗震性能评估方法,最后讨论了残余位移研究中存在的问题和建议。  相似文献   

Seismic responses of postyield hardening single–degree-of-freedom systems incorporating high-strength elastic material     

Hanlin Qiang  Peng Feng  Zhe Qu 《地震工程与结构动力学》2019,48(6):611-633

It is widely accepted that ductility design improves the seismic capacity of structures worldwide. Nevertheless, inelastic deformation allows serious damage to occur in structures. Previous studies have shown that a certain level of postyield stiffness may reduce both the peak displacement and residual deformation of a structure. In recent years, several high-strength elastic materials, such as fiber-reinforced polymer (FRP) and high-strength steel bars, have been developed. Application of these materials can easily provide a structure with a much higher and more stable postyield stiffness. Many materials, members, and structures that incorporate both high-strength elastic materials and conventional materials show significant postyield hardening (PYH) behaviors. The significant postyield stiffness of PYH structures can help effectively reduce both peak and residual deformations, providing a choice when designing resilient structures. However, the findings of previous studies of structures with elastic-perfectly plastic (EPP) behavior or small postyield stiffness may not be accurate for PYH structures. The postyield stiffness of a structure must be considered an important primary structural parameter, in addition to initial stiffness, yielding strength, and ductility. In this paper, extensive time history and statistical analyses are carried out for PYH single–degree-of-freedom (SDOF) systems. The mean values and coefficients of variation of the peak displacement and residual deformation are obtained and discussed. A new R-μ_p-T-α relationship and damage index for PYH structures are proposed. A theoretical model for the calculation of residual deformation is also established. These models provide a basis for developing the appropriate seismic design and performance evaluation procedures for PYH structures.  相似文献   

Development of detachable replaceable links for eccentrically braced frames     

Mehmet Bakır Bozkurt  Sina Kazemzadeh Azad  Cem Topkaya 《地震工程与结构动力学》2019,48(10):1134-1155

Eccentrically braced frames (EBFs) can be repaired after a major earthquake by replacing the links. The link replacement is not a straightforward process and is influenced by the type of the link and the amount of residual frame deformations. The past decade has witnessed the development of different types of replaceable links such as end-plated links, web connected links, bolted flange and web spliced links, and collector beam and brace spliced links. All of the developed replaceable link details, except the web connected links, are not suitable for link replacement under residual frame drift. In this paper, a detachable replaceable link detail which is based on splicing the link at its mid-length is proposed. The detail is well suited for installation under residual frame drifts. In addition, the weight and size of the members to be transported and erected are reduced significantly, thereby facilitating the replacement procedure. Performance of this proposed replaceable link is studied by conducting six nearly full scale EBF tests under quasi-static cyclic loading. The link length ratio, type of end-plated mid-splice connection, and the amount of residual drift are considered as test variables. The test results revealed that the inelastic rotation capacity of the detachable replaceable links exceeds the requirements of the AISC Seismic Provisions for Structural Steel Buildings. No failures are observed in the end-plated mid-splice connections demonstrating the potential of the proposed details. The detachable replaceable links are investigated by numerical analysis as well to further validate their applicability and to develop design recommendations.  相似文献