Limiting equilibrium method for slope/drilled shaft system     

Mohammad Yamin  Robert Y. Liang 《国际地质力学数值与分析法杂志》2010,34(10):1063-1075

The use of drilled shafts to stabilize an unstable slope has been a widely accepted practice. There are two basic design and analysis issues involved: one is to determine the global factor of safety of the drilled shafts stabilized slope and the other one is to determine the design earth thrust on the drilled shafts for structural design of the shafts. In this paper, a limiting equilibrium method of slices based solution for calculating global factor of safety (FS) of a slope with the presence of a row of drilled shafts is developed. The arching mechanisms due to the presence of the drilled shafts on slope were taken into account by a load transfer factor. The method for calculating the net force applied to the drilled shaft from the soil mass was also developed. The interrelationships among the drilled shaft location on the slope, the load transfer factor, and the global FS of the slope/shaft system were derived utilizing the developed numerical closed‐form solution. An illustrative example is presented to elucidate the use of the solution in optimizing the location of the drilled shafts on slope to achieve the desired global factor of safety of the slope/shaft system. Copyright © 2009 John Wiley & Sons, Ltd.  相似文献   

A density‐dependent elastoplastic hydro‐mechanical model for unsaturated compacted soils     

D. A. Sun  D. C. Sheng  H. B. Cui  S. W. Sloan 《国际地质力学数值与分析法杂志》2007,31(11):1257-1279

This paper presents a three‐dimensional elastoplastic constitutive model for predicting the hydraulic and mechanical behaviour of unsaturated soils. It is based on experimental results obtained from a series of controlled‐suction triaxial tests on unsaturated compacted clay with different initial densities. Hydraulic hysteresis in the water‐retention behaviour is modelled as an elastoplastic process, with the elastic part modelled by a series of scanning curves and the elastoplastic part modelled by the main drying and wetting curves. The effect of void ratio on the water‐retention behaviour is studied using data obtained from controlled‐suction wetting–drying cyclic tests on unsaturated compacted clay with different initial densities. The effect of the degree of saturation on the stress–strain‐strength behaviour and the effect of void ratio on the water‐retention behaviour are considered in the model, as is the effect of suction on the hydraulic and mechanical behaviour. The initial density dependency of the compacted soil behaviour is modelled by experimental relationships between the initial density and the corresponding yield stress and, thereby, between the initial density and the normal compression line. The model is generalized to three‐dimensional stress states by assuming that the shapes of the failure and yield surfaces in the deviatoric stress plane are given by the Matsuoka–Nakai criterion. Model predictions of the stress–strain and water‐retention behaviour are compared with those obtained from triaxial tests with different initial densities under isotropic compression, triaxial compression and triaxial extension, with or without variation in suction. The comparisons indicate that the model accurately predicts the hydraulic and mechanical behaviour of unsaturated compacted soils with different initial densities using the same material constant. Copyright © 2006 John Wiley & Sons, Ltd.  相似文献   

Importance of footing–soil separation on dynamic stiffness of piled embedded footings     

L. A. Padrón  G. E. Mylonakis  D. E. Beskos 《国际地质力学数值与分析法杂志》2009,33(11):1439-1448

Different phenomena such as soil consolidation, erosion, and scour beneath an embedded footing supported on piles may lead to loss of contact between soil and the pile cap underside. The importance of this separation on the dynamic stiffness and damping of the foundation is assessed in this work. To this end, a numerical parametric analysis in the frequency domain is performed using a rigorous three‐dimensional elastodynamic boundary element–finite element coupling scheme. Dimensionless plots relating dynamic stiffness functions computed with and without separation effects are presented for different pile–soil configurations. Vertical, horizontal and rocking modes of oscillation are analyzed for a wide range of dimensionless frequencies. It is shown that the importance of separation is negligible for frequencies below those for which dynamic pile group effects start to become apparent. Redistribution of stiffness contributions between piles and footing is also addressed. Copyright © 2009 John Wiley & Sons, Ltd.  相似文献   

Streambank dewatering for increased stability     

F. Douglas Shields Jr  Andrew Simon  Seth M. Dabney 《水文研究》2009,23(11):1537-1547

Streambank erosion is often the dominant source of sediment leaving modified watersheds. Mass failure of high, steep banks is one of the most serious forms of streambank erosion. The risk of a given bank experiencing mass failure is a function of bank height, angle, and soil strength, which is governed by soil moisture. Two methods for bank dewatering were tested in adjacent sections of streambank bordering a deeply incised channel in northern Mississippi: a low‐cost pump system and subsurface horizontal drains. Pore water pressures (both positive and negative pressures, or matric suction) were continuously monitored for 2 years at the pumped site, at an adjacent untreated control section, and for 1 year at the site stabilized with horizontal drains. Resulting data were used to calculate a time series of the factor of safety using a computer model. Over the course of two wet seasons, average bank retreats for the control and pumped plots were 0·43 and 0·21 m, respectively. More limited monitoring revealed that the site with passive drains retreated about 0·23 m. At the pumped site pore water pressure was 3–4 kPa lower than at the control site during the most critical periods. Accordingly, computed factors of safety were above the failure threshold at the pumped site, but fell below unity at the control site on 11 occasions over the period of observation. Similarly, the drained site displayed generally lower pore water pressure and higher safety factors except for two events when drains were evidently overwhelmed with the volume of local surface and subsurface flows. These results suggest, but do not prove, that bank dewatering promoted lower rates of bank retreat and higher levels of stability since the three sites had slight differences in soils, geometry and boundary conditions. Initial cost of the dewatering treatments were significantly less than orthodox bank stabilization measures, but operation and maintenance requirements may be greater. Published in 2009 by John Wiley & Sons, Ltd.  相似文献   

Composite analytical solutions for a soil vapour extraction system     

Jui‐Sheng Chen  Ching‐Ping Liang  Chih‐Yu Chen  Chen‐Wuing Liu 《水文研究》2007,21(11):1506-1516

Soil vapour extraction (SVE) is a common remediation technique for cleaning up unsaturated soils contaminated by volatile organic compounds (VOCs). Analytical solutions, which result from simple mathematical models, can allow the fast approximation of the time‐dependent effluent concentration and the gaining of insight into the processes that take place during soil remediation. Deriving the analytical solutions to advection–dispersion equations that simultaneously take into account the mechanical dispersion and molecular diffusion is very difficult because of the variable dependence of governing equations' coefficients. In this study, we first present two simplified analytical solutions that only consider mechanical dispersion or molecular diffusion. The two developed analytical solutions are compared with the numerical solution that simultaneously considers both mechanical dispersion and molecular diffusion to examine the applicability of the two simplified analytical solutions and distinguishes the individual contribution of the mechanical dispersion and molecular diffusion to total VOCs transport in an SVE system. Results show that dispersion plays an important role during SVE decontamination and neither the diffusion‐dominated solution nor the dispersion‐dominated solution can agree well with the numerical solution when both mechanical dispersion and molecular diffusion have significant contributions to the total VOCs transport flux. A composite analytical solution that linearly couples the diffusion‐ and dispersion‐dominated analytical solutions, which is proposed herein to eliminate the discrepancy between the analytical solutions and the numerical solution. Results indicate that the proposed composite analytical solution agrees well with the numerical solution and is an effective tool for quickly and accurately evaluating the time‐dependent effluent concentration for parameters of the different ranges of interest in an SVE remedial system. Copyright © 2006 John Wiley & Sons, Ltd.  相似文献   

Managing Soil Erosion Potential by Integrating Digital Elevation Models with the Southern China＇s Revised Universal Soil Loss Equation——A Case Study for the West Lake Scenic Spots Area of Hangzhou, China   总被引：1，自引：0，他引：1  

WANG Weiwu 《山地科学学报》2007,4(3):237-247

In China, many scenic and tourism areas are suffering from the urbanization that results from physical development of tourism projects, leading to the removal of the vegetative cover, the creation of areas impermeable to water, in-stream modifications, and other problems. In this paper, the risk of soil erosion and its ecological risks in the West Lake Scenic Spots （WLSS） area were quantitatively evaluated by integrating the revised universal soil loss equation （RUSLE） with a digital elevation model （DEM） and geographical information system （GIS） software. The standard RUSLE factors were modified to account for local climatic and topographic characteristics reflected in the DEM maps, and for the soil types and vegetation cover types. An interface was created between the Areinfo software and RUSLE so that the level of soil erosion and its ecological risk in the WLSS area could be mapped immediately once the model factors were defined for the area. The results from an analysis using the Areinfo-RUSLE interface showed that the risk value in 93 % of the expanding western part of the WLSS area was moderate or more severe and the soil erosion risk in this area was thus large compared with that in the rest of the area. This paper mainly aimed to increase the awareness of the soil erosion risk in urbanizing areas and suggest that the local governments should consider the probable ecological risk resulting from soil erosion when enlarging and developing tourism areas.  相似文献   

武汉市初中毕业生地震知识调查     

张珒珒 《大地测量与地球动力学》2007,27(Z1):77-79

为了解初中毕业生地震科普知识的掌握情况，自行设计了武汉市初中毕业生地震科普知识调查问卷，对100名武汉市初中毕业生进行现场调查。调查结果为良、中、差等级分别占4%、18%、78%。 说明武汉市初中毕业生地震科普知识掌握情况令人堪忧，应尽早加强中学生地震科普知识教育， 以提高全民防震减灾意识。  相似文献   

新型知识观下高校旅游管理专业课程知识的构建思考     

黄萍 《成都信息工程学院学报》2007,22(5):658-661

旅游管理专业是1998年新设置的高校本科专业,受学科专业特点和旅游职业需求的影响,其课程知识与传统的学科专业相比,具有很强的实践性.为此,其课程知识的构建,需要深入认识旅游管理专业课程知识的特点,建立起"科学-人本观"的构建价值取向,并充分唤醒教学参与者的主体意识,发挥课堂对课程知识的构建作用.  相似文献   

Lateral flow thresholds for aspen forested hillslopes on the Western Boreal Plain,Alberta, Canada     

T. E. Redding  K. J. Devito 《水文研究》2008,22(21):4287-4300

To predict the long‐term sustainability of water resources on the Boreal Plain region of northern Alberta, it is critical to understand when hillslopes generate runoff and connect with surface waters. The sub‐humid climate (P ≤ ET) and deep glacial sediments of this region result in large available soil storage capacity relative to moisture surpluses or deficits, leading to threshold‐dependent rainfall‐runoff relationships. Rainfall simulation experiments were conducted using large magnitude and high intensity applications to examine the thresholds in precipitation and soil moisture that are necessary to generate lateral flow from hillslope runoff plots representative of Luvisolic soils and an aspen canopy. Two adjacent plots (areas of 2·95 and 3·4 m²) of contrasting antecedent moisture conditions were examined; one had tree root uptake excluded for two months to increase soil moisture content, while the second plot allowed tree uptake over the growing season resulting in drier soils. Vertical flow as drainage and soil moisture storage dominated the water balances of both plots. Greater lateral flow occurred from the plot with higher antecedent moisture content. Results indicate that a minimum of 15–20 mm of rainfall is required to generate lateral flow, and only after the soils have been wetted to a depth of 0·75 m (C‐horizon). The depth and intensity of rainfall events that generated runoff > 1 mm have return periods of 25 years or greater and, when combined with the need for wet antecendent conditions, indicate that lateral flow generation on these hillslopes will occur infrequently. Copyright © 2008 John Wiley & Sons, Ltd.  相似文献   

Hydrologic characteristics of lake‐ and stream‐side riparian wetted margins in the McMurdo Dry Valleys,Antarctica     

Melissa L. Northcott  Michael N. Gooseff  John E. Barrett  Lydia H. Zeglin  Cristina D. Takacs‐Vesbach  John Humphrey 《水文研究》2009,23(9):1255-1267

Water is a limiting factor for life in the McMurdo Dry Valleys (MDV), Antarctica. The active layer (seasonally thawed soil overlying permafrost) accommodates dynamic hydrological and biological processes for 10–16 weeks per year. Wetted margins (visually wetted areas with high moisture content) adjacent to lakes and streams are potential locations of great importance in the MDV because of the regular presence of liquid water, compared with the rest of the landscape where liquid water is rare. At 11 plots (four adjacent to lakes, seven adjacent to streams), soil particle size distribution, soil electrical conductivity, soil water content and isotopic signature, width of the wetted margin, and active layer thaw depth were characterised to determine how these gradients influence physicochemical properties that determine microbial habitat and biogeochemical cycling. Sediments were generally coarse‐grained in wetted margins adjacent to both lakes and streams. Wetted margins ranged from 1·04 to 11·01 m in average length and were found to be longer at lakeside sites than streamside. Average thaw depths ranged from 0·12 to 0·85 m, and were found to be deepest under lake margins. Lake margins also had much higher soil electrical conductivity, steeper topographic gradients, but more gradual soil moisture gradients than stream margins. Patterns of soil water δ¹⁸O and δD distribution indicate capillary action and evaporation from wetted margins; margin pore waters generally demonstrated isotopic enrichment with distance from the shore, indicating evaporation of soil water. Lake margin pore waters were significantly more negative in D_XS (D_XS = δD‐8δ¹⁸O) than streamside pore waters, indicating a longer history of evaporation there. Differences between lake and stream margins can be explained by the more consistent availability of water to lake margins than stream margins. Differences in margin characteristics between lakes and streams have important consequences for the microbial habitat of these margins and their functional role in biogeochemical cycling at these terrestrial–aquatic interfaces. Copyright © 2009 John Wiley & Sons, Ltd.  相似文献