赣杭构造带中生代红色碎屑沉积盆地的形成和演化   总被引：12，自引：0，他引：12  

张星蒲 《铀矿地质》1999,15(2):77-85

本文是在继讨论赣杭构造带中生代火山盆地的形成和演化之后,再对赣杭构造带中生代红色碎屑沉积盆地（简称赣杭带红盆）的形成和演化作一探讨。涉及的内容主要有：赣杭构造带中生代红盆结构及演化时代;从晚侏罗世末到整个白垩纪各期主要构造运动及与红盆演化的关系;箕状盆地的几个主要特征;红盆演化的动力学背景;红盆所对应的深部构造以及深断裂活动和盆地演化的实际含义等  相似文献   

走滑断层作用的相关构造   总被引：32，自引：3，他引：29  

王义天  李继亮 《地质科技情报》1999,18(3):30-34

走滑断层的形成可以用纯剪和单剪这两种基力学机制和它们之间的过渡类型－压剪和张剪加以解释,其应力分布的局域性导致了形变特性的差异性。其相关构造类型,包括褶皱断层,断层,走滑盆地,走滑旋转构造,花状构造与走滑双重构造,等是走滑断层的主要研究对象和内容。  相似文献   

Normal fault growth and linkage in the Gediz (Alaşehir) Graben,Western Turkey,revealed by transient river long‐profiles and slope‐break knickpoints          下载免费PDF全文

Emiko Kent  Sarah J. Boulton  Alexander C. Whittaker  Iain S. Stewart  M. Cihat Alçiçek 《地球表面变化过程与地形》2017,42(5):836-852

The Gediz (Ala?ehir) Graben is located in the highly tectonically active and seismogenic region of Western Turkey. The rivers upstream of the normal fault‐bounded graben each contain a non‐lithologic knickpoint, including those that drain through inferred fault segment boundaries. Knickpoint heights measured vertically from the fault scale with footwall relief and documented fault throw (vertical displacement). Consequently, we deduce these knickpoints were initiated by an increase in slip rate on the basin‐bounding fault, driven by linkage of the three main fault segments of the high‐angle graben bounding fault array. Fault interaction theory and ratios of channel steepness suggest that the slip rate enhancement factor on linkage was a factor of 3. We combine this information with geomorphic and structural constraints to estimate that linkage took place between 0.6 Ma and 1 Ma. Calculated pre‐ and post‐linkage throw rates are 0.6 and 2 mm/yr respectively. Maximum knickpoint retreat rates upstream of the faults range from 4.5 to 28 mm/yr, faster than for similar catchments upstream of normal faults in the Central Apennines and the Hatay Graben of Turkey, and implying a fluvial landscape response time of 1.6 to 2.7 Myr. We explore the relative controls of drainage area and precipitation on these retreat rates, and conclude that while climate variation and fault throw rate partially explain the variations seen, lithology remains a potentially important but poorly characterised variable. Copyright © 2016 John Wiley & Sons, Ltd.  相似文献   

典型砖木结构农居地震弹塑性有限元分析   总被引：1，自引：1，他引：0       下载免费PDF全文

姚新强  孙柏涛  陈宇坤  杨绪连 《地震工程学报》2018,40(1):32-40

针对我国农居结构中比例最高的砖木结构,选取典型结构运用ABAQUS有限元软件进行模态和地震时程弹塑性分析。给出M0.5和M5两种砌筑强度砖木结构农居的前三阶特征周期和振型,并与经验周期公式值进行对比分析,提出后者存在的问题和修改建议。选取天津波作为地震动时程输入,分别计算不同峰值加速度下两种砖木结构农居弹塑性地震反应,给出相应的拉损伤云图,并对结构的破坏特征进行分析,给出结构抗震薄弱部位。结果表明,砌筑强度是决定结构抗震能力的关键因素之一。  相似文献   

Active tectonics and erosional unloading at the eastern margin of the Tibetan Plateau   总被引：14，自引：0，他引：14  

Alexander L. Densmore LI Yong Michael A. Ellis ZHOU Rongjun 《山地科学学报》2005,2(2):146-154

Introduction The eastern margin of the Tibetan Plateau, adjacent to the Sichuan Basin (Figure 1), has become a testing ground for a variety of models that contrast mechanisms of extrusion and crustal thickening associated with the India-Asia collision (Avouac and Tapponnier 1993, England and Houseman 1986),but that also address the extent to which the upper crust and upper mantle are coupled (Royden et al. 1997, Holt 2000). The margin is characterized by topographic relief of over 5 km an…  相似文献   

Seismic fracture evaluation of diaphragm joints in welded beam-to-box column moment connections     

Ching-Yi Tsai  Keh-Chyuan Tsai  Chao-Hsien Li  Chung-Che Wu  Ker-Chun Lin  Sheng-Jhih Jhuang 《地震工程与结构动力学》2020,49(13):1344-1362

Steel box columns are widely used in steel building structures in Taiwan due to their dual strong axes. To transfer the beam-end moment to the column, diaphragm plates of the same thickness and elevations as the beam flanges are usually welded inside the box column. The electro-slag welding (ESW) process is widely used to connect the diaphragms to the column flanges in Taiwan because of its convenience and efficiency. However, ESW may increase the hardness of the welds and heat-affected zones (HAZs), while reducing the Charpy-V notch strength in the HAZ. This situation can cause premature fracture of the diaphragm-to-column flange welds before a large plastic rotation is developed in the beam-to-box column joints. To quantify the critical eccentricity and the effectiveness of fracture prediction, this study uses fracture prediction models and finite element model (FEM) analysis to correlate the test results. In this study, two beam-to-box column connection subassembly tests are conducted with different loading protocols and ESW chamber shapes. To implement a fracture prediction model, the material parameters are established from circumferential notched tensile tests and FEM analysis. Test results indicate that the fracture instances can be predicted on the basis of the cumulative plastic deformation in the HAZs. Analytical results indicate that fracture instances and locations are sensitive to the relative locations of the ESW joints and beam flange. Tests also confirm that the possible fracture of the diaphragm-to-column flange joints can be mitigated by enlarging the chamber of the ESW joint.  相似文献   

Geomorphological evidence of paleoseismicity: Surficial and underground structures of Pasmajärvi postglacial fault     

Mira Markovaara-Koivisto  Antti E.K. Ojala  Jussi Mattila  Ilmo Kukkonen  Ilkka Aro  Arto Pullinen  Pekka Hänninen  Maarit Middleton  Aleksi Sutinen  Juha Majaniemi  Timo Ruskeeniemi  Raimo Sutinen 《地球表面变化过程与地形》2020,45(12):3011-3024

The cyclic nature of glaciations and related postglacial faulting represents a risk for the deep geological disposal of spent nuclear fuel in areas likely to be affected by future glaciations. Seismic history was therefore studied by means of detecting geomorphological structures on airborne laser scanning digital elevation models and underground by excavating in an esker and trenching across a postglacial fault located in northern Fennoscandia. OLS dating and assessing the geomorphological structures was used for timing of the seismic history. The results suggest that the faulting of different segments in the Pasmajärvi complex is due to at least two late Weichselian events, which probably occurred both subglacially and postglacially. The most reliable input for the moment magnitude estimates was vertical slip profiles, and therefore these estimates (M_W ≈ 6.4–6.9) are suggested. © 2020 John Wiley & Sons, Ltd.  相似文献   

内蒙古二连盆地巴彦宝力格煤田下白垩统赛汉塔拉组层序—古地理与聚煤作用^*   总被引：1，自引：0，他引：1  

王帅  邵龙义  孙钦平  张云鹤  史鸣剑  孙斌  鲁静 《古地理学报》2018,20(2):325-336

二连盆地巴彦宝力格煤田蕴藏着丰富的煤炭和煤层气资源。利用钻孔和测井资料对赛汉塔拉组层序格架下的古地理演化特征和聚煤作用进行研究,识别出3种层序界面类型: 区域不整合面、河道下切谷冲刷面和对应整合面,将赛汉塔拉组划分为2个三级层序,厚煤层主要发育于层序Ⅰ湖侵体系域早期和晚期。采用单因素分析多因素综合作图法,恢复了层序格架下的古地理格局,古地理单元为冲积扇、扇三角洲平原和滨浅湖。有利聚煤环境为扇三角洲平原与滨浅湖过渡带、滨浅湖,具有合适的基底沉降速率并且受到较小的陆源碎屑影响。从层序Ⅰ到层序Ⅱ,煤层厚度减小,聚煤作用减弱;多层厚煤层的形成受基底沉降震荡性、周期性的影响,受可容空间增加速率与泥炭堆积速率比值不断变化的控制。层序Ⅰ发育时期,研究区中部为下一步煤炭资源和煤层气勘探的有利区。  相似文献   

高土石坝裂缝分析的变形倾度有限元法及其应用   总被引：1，自引：0，他引：1  

彭翀  张宗亮  张丙印  袁友仁 《岩土力学》2013,34(5):1453-1458

土石坝张拉裂缝一般由坝体的不均匀沉降变形引起,是土石坝破坏的主要诱因和表现形式之一。将基于现场沉降监测资料的传统变形倾度法进行了扩展,通过在有限元计算程序中嵌入变形倾度计算模块,发展了基于有限元变形计算的变形倾度有限元法。该方法简洁实用,方便与常规有限元变形计算相耦合,可作为在工程设计阶段分析和估算土石坝是否会发生表面张拉裂缝的实用方法。应用所发展的变形倾度有限元法,以糯扎渡高心墙堆石坝工程为例,进行了坝体后期变形引起坝体表面发生张拉裂缝的敏感性计算分析,探讨了高土石坝变形倾度的分布规律以及与坝体后期变形的关系,发现对糯扎渡高心墙堆石坝,坝顶后期沉降最大值小于坝高0.39%,可作为防止发生坝顶横向张拉裂缝的控制工况。通过工程实例的计算,说明提出的方法可用于高土石坝的裂缝预测分析。  相似文献   

云南农村土木结构房屋有限元抗震分析   总被引：3，自引：0，他引：3  

肖梅玲  叶燎原  刘本玉  冉睛  张童 《地震研究》2012,35(2):276-281,296

根据2007年6月3日宁洱6.4级地震现场调查结果,对破坏较严重的土坯房建立了地震分析模型。对不同的开间、进深及檐口高的房屋,输入了3类场地超越概率为63%及超越概率为3%的地震波进行了有限元抗震分析。结果表明:墙厚影响不大,墙高的影响较大,墙高增加,破坏性增加;因此建议在满足使用功能的前提下,不增加墙厚,而减少层高对抗震更为有利,最后提出了相应的抗震加固措施。  相似文献