3D打印技术在矿床学中的应用研究——以内蒙古乌力吉敖包萤石矿Ⅲ号矿体为例     

陈奇 《地质与勘探》2018,54(4):833-845

3D打印(3D printing)是一种以三维模型为样本的快速成形技术,它通过逐层打印或粉末熔铸的方式来构造需要的立体图形。本文从3D打印技术的原理及其发展现状入手,重点列举内蒙古乌力吉敖包萤石矿,利用3D打印机打印具有现实可观性的地质体实体,探讨3D打印技术作为新兴的科技手段应用于矿床学教学与研究的应用价值和发展前景。研究发现,3D打印技术在矿体三维可视化中的应用符合地质图件立体化和3D打印技术多领域化的趋势,未来3D打印技术在地质领域的应用也有助于开拓矿床学教学和研究的新方式与新思路。  相似文献   

页岩压裂影响因素三维模型数值分析     

张健  张国祥  王金意 《江苏地质》2018,42(1):127-130

不同影响因素对页岩水力压裂效果有不同的影响。基于三维数值计算模型介绍了水力压裂的典型过程,针对水平最小主应力、页岩的弹性模量和渗透系数对压裂的影响进行了分析。结果表明:随着水平最小主应力的增加,裂缝高度也随之增加;随着页岩的弹性模量增加,裂缝的高度随之降低;随着渗透系数的增加,裂缝高度也随之增加;随着压裂液的黏度系数提高,裂缝的高度降低。  相似文献   

节理分布空间变异的地下洞室稳定性概率分析   总被引：1，自引：0，他引：1  

王川  冷先伦  李海轮  李刚 《岩土力学》2021,(1):224-232,244

以岩土材料力学参数空间变异性的"点估计-有限元"分析方法为基础,结合节理分析时自身存在几何模型、网格划分等特性,扩展了该方法在节理分布空间变异性分析方面的适用性,明确了具体的研究步骤与方法。以某抽水蓄能水电站为例,通过分析节理空间变异性对围岩变形与塑性区的影响,验证了扩展后该方法的准确性和合理性。对工程案例开挖揭露的1400余条节理进行概率统计,建立了节理空间变异性的有限元分析模型;采用扩展后的概率分析方法,研究了节理分布对地下洞室群围岩开挖稳定性的影响。研究结果表明:(1)对比概率分析得到的围岩变形概率分布与现场监测结果,发现剔除变形异常点后监测变形量值大部分位于得到的位移概率分布范围内,说明节理的空间变异性是导致监测变形波动的主要影响因素;(2)围岩变形概率分布的标准差能有效识别出围岩开挖变形受节理空间变异性的影响程度,对于所给出的案例依次为:机窝>边墙>顶拱;(3)围岩塑性区的概率分区能合理判断地下洞室群开挖时受节理影响较大的区域和范围,为工程施工的支护设计提供依据。  相似文献   

基于三维激光扫描技术的岩质边坡泥化夹层空间分布和几何形态     

刘文连  张家明  王志强  徐则民 《吉林大学学报(地球科学版)》2021,51(4):1139-1151

为了定量研究泥化夹层的空间分布和几何形态,以云南省玉溪市生活垃圾焚烧发电厂高边坡局部开挖剖面为对象,利用徕卡ScanStation C10三维激光扫描仪和瑞典ROMER RA-7520-2六轴关节臂三维测量仪进行扫描,得到了开挖剖面和泥化夹层的原始点云数据;然后采用Cyclone和Geomagic Wrap软件对点云数据进行一系列处理,分析了泥化夹层的三维空间分布、层面产状、间距、层面粗糙度和几何形态。结果表明：大部分泥化夹层横向分布于整个扫描剖面,少数呈局部分布;泥化夹层的平均倾向为196.41°±5.51°,平均倾角为22.27°±2.23°,间距在3.7~49.1 cm之间,平均值为（20.4±12.0）cm;不同层位及同一层位不同横向位置的泥化夹层厚度都不等,最厚约20 mm,最薄小于1 mm;泥化夹层顶面局部典型区域的平面拟合偏差在-22.4~32.5 mm之间,沿夹层倾向的粗糙度系数在5.67~16.77之间,平均值为10.11±3.25;泥化夹层的表面积与体积之比在5.14~5.86 cm^-1之间。运用三维激光扫描技术研究泥化夹层的空间分布和几何形态是可行的。玉溪市生活垃圾焚烧发电厂高边坡的泥化夹层具有宏观整体上相对平直、相互近似平行、非等距分布、间距小、层数多、厚度薄,细观上顶面粗糙底面相对光滑、三维形态复杂的特点。  相似文献   

冻融循环下含节理类岩石试样剪切破坏特性     

徐新木  张耀平  付玉华  雷大星  邹雄刚 《吉林大学学报(地球科学版)》2021,51(2):483-494

为探究冻融循环对节理岩石抗剪力学特性的影响,针对冻融循环前后不同连通率节理岩石试样进行剪切特性试验,探究了节理试样的剪切破坏机制,对比分析了冻融前后节理试样抗剪强度的衰减趋势,分析了黏聚力及内摩擦角随岩石试样剪切破坏面分形维数的变化规律。结果表明：随冻融循环次数的增加,节理试样剪切应力-位移曲线发生显著变化,峰值剪应力出现明显下降,黏聚力及内摩擦角对比冻融前试样出现明显劣化,并且随节理试样连通率的增加,劣化程度加剧;在节理连通率相同时,随冻融循环次数的增加,剪切破坏面的分形维数呈现近指数函数递增的趋势,随分形维数的增加,节理试样的黏聚力损伤因子、内摩擦损伤因子也呈现指数函数增加的趋势;在冻融循环次数相同时,内摩擦角损伤因子随节理连通率的增大呈先减小后增大的趋势,而黏聚力损伤因子在冻融循环次数为30次前后分别呈递增和先减后增的趋势。  相似文献   

中国东部夏季降水与气温的联合EOF分析     

郑金新  黎洛丝  郑嘉雯  郑菲菲 《广东气象》2019,41(2):9-14

采用JEOF等方法分析中国东部夏季降水和气温的协同变化时空分布特征,结果表明:当时间系数为正时,第1典型场降水型态从北向南(下同)呈"++-"分布,气温表现为冷异常,500 hPa回归场在中纬度地区呈显著低压异常,SST回归场表现为太平洋海域呈西北-东南的分布;第2典型场降水呈"+-"分布,气温则呈"-+"分布;第3典型场降水分布呈中间型,气温场呈"-+"分布。  相似文献   

Fractographic determination of joint length distribution in chalk     

Dov Bahat 《Rock Mechanics and Rock Engineering》1988,21(1):79-94

Summary Measurements of fracture joint distribution combined with determinations of plume length and orientation on a vertical section of a single chalk layer near Beer Sheva, Israel, reveal that joints marked by unilateral and circular plumes are skewed towards the shorter sizes while joints decorated by bilateral plumes are skewed towards the longer sizes. The mean lengths of the unilateral and bilateral joints are 66.5 cm and 155.6 cm, with standard deviations of 30 cm and 60.6 cm, respectively. These results as well as joint length observations from other areas seem to suggest a bimodal length distribution. However, since the minor maximum is generally very weak, and due to some additional uncertainties, further confirmation of the present observations is needed.  相似文献   

Shear resistance of jointed rock masses and stability calculation of rock slopes     

Xing Zhang 《Geotechnical and Geological Engineering》1993,11(2):107-124

Summary Based on an extension to a model originally proposed by Zhang (1990), a method for estimating the shear strength of a jointed rock mass containing two joint sets is developed. Compared to the original method in which only a single en-echelon joint set was considered, the new method has the following advantages: (1) it allows a much more realistic joint pattern to be incorporated; (2) the effects of joint connectivity and intersection angle between joint sets on shear strength are included. Use of the new method is demonstrated by application to the calculation of the stability of slopes in jointed rock. The importance of joint connectivity, joint persistence and joint set intersection angle on slope stability, as predicted by the model, is revealed.  相似文献   

以PC1井三维荧光光谱分析结果论油气垂向运移     

林玉祥  方炎华  朱雷  王振平 《地质论评》1994,40(7):161-167

本文以Pcl并不同深度岩心和地表土壤作为分析样品，通过三维全扫描荧光光谱等分析。揭示了该区油气垂向运移规律和地下油气的某些分布特征。研究表明，芳烃三维荧光光谱方法是研究芳烃组成变化最理想的手段之一，可以有效地解决油气运移等问题。  相似文献   

Effects of lateral velocity heterogeneity under the Nevada Test Site on short-periodP wave amplitudes and travel times     

Christopher S. Lynnes  Thorne Lay 《Pure and Applied Geophysics》1990,132(1-2):245-267

Short-period teleseismicP waves from the Nevada Test Site (NTS) show systematic variations in amplitudes and travel times, with low amplitudes corresponding to fast travel times, suggesting elastic focussing-defocussing effects. Also, the azimuthal amplitude and travel time patterns for events at the Pahute Mesa subsite are systematically different from those at the Yucca Flat subsite, indicating the presence of a near-source component in both the amplitude and travel-time variations. This component is isolated by removing the mean station pattern for all of NTS from the observations. A very-near-source component in the Pahute Mesa observations is also isolated by removing subsite station means from the measurements, whereas the Yucca Flat observations exhibited no coherent very-near-source component. These anomalies are back-projected through laterally homogeneous structure to form thin lens models at various depths. Travel-time delays are predicted from the amplitude variations using the equation for wavefront curvature. The long-wavelength components of the predicted and observed time delays correlate well, at depths of 25 km for the very-near-source component under Pahute Mesa and 160 km for the regional component under NTS. The time delay surfaces predicted by the amplitudes at these depths are mapped into warped velocity discontinuities suitable for the calculation of synthetic seismograms using the Kirchhoff-Helmholtz integral formulation. Both the intersite (near-source) and intrasite (very-near-source) differences in amplitudes are qualitatively predicted very well, although the range of variation is somewhat underpredicted. This deficiency is likely due to the destructive interference of anomalies inherent in back-projection to a single layer.  相似文献