Heat flow and thermal modeling of the Yinggehai Basin, South China Sea   总被引：9，自引：0，他引：9  

Lijuan He  Liangping Xiong  Jiyang Wang 《Tectonophysics》2002,351(3)

Geothermal gradients are estimated to vary from 31 to 43 °C/km in the Yinggehai Basin based on 99 temperature data sets compiled from oil well data. Thirty-seven thermal conductivity measurements on core samples were made and the effects of porosity and water saturation were corrected. Thermal conductivities of mudstone and sandstone range from 1.2 to 2.7 W/m K, with a mean of 2.0±0.5 W/m K after approximate correction. Heat flow at six sites in the Yinggehai Basin range from 69 to 86 mW/m², with a mean value of 79±7 mW/m². Thick sediments and high sedimentation rates resulted in a considerable radiogenic contribution, but also depressed the heat flow. Measurements indicate the radiogenic heat production in the sediment is 1.28 μW/m³, which contributes 20% to the surface heat flow. After subtracting radiogenic heat contribution of the sediment, and sedimentation correction, the average basal heat flow from basement is about 86 mW/m².Three stages of extension are recognized in the subsidence history, and a kinematic model is used to study the thermal evolution of the basin since the Cenozoic era. Model results show that the peak value of basal heat flow was getting higher and higher through the Cenozoic. The maximum basal heat flow increased from 65 mW/m² in the first stage to 75 mW/m² in the second stage, and then 90 mW/m² in the third stage. The present temperature field of the lithosphere of the Yinggehai Basin, which is still transient, is the result of the multistage extension, but was primarily associated with the Pliocene extension.  相似文献   

Physical properties of ultrahigh-pressure metamorphic rocks from the Sulu terrain, eastern central China: implications for the seismic structure at the Donghai (CCSD) drilling site     

Hartmut Kern  Zhenmin Jin  Shan Gao  Till Popp  Zhiqin Xu 《Tectonophysics》2002,354(3-4)

About 30 samples representing major lithologies of Sulu ultrahigh-pressure (UHP) metamorphic rocks were collected from surface exposures and exploration wells, and compressional (Vp) and shear wave (Vs) velocities and their directional dependence (anisotropy) were determined over a range of constant confining pressures up to 600 MPa and temperatures ranging from 20 to 600 °C. Samples range in composition from acidic to ultramafic. P- and S-wave velocities measured at 600 MPa vary from 5.08 to 8.64 km/s and 2.34 to 4.93 km/s, respectively. Densities are in the range from 2.60 to 3.68 g/cm³. To make a direct tie between seismic measurements (refraction and reflection) and subsurface lithologies, the experimental velocity data (corresponding to shallow depths) were used to calculate velocity profiles for the different lithologies and profiles of reflection coefficients at possible lithologic interfaces across the projected 5000-m Chinese Continental Scientific Drilling Program (CCSD) crustal segment. Comparison of calculated in situ velocities with respective intrinsic velocities suggests that the in situ velocities at shallow depths are lowered by an increased abundance of open microcracks. The strongly reflective zone beneath the Donghai drill site can be explained by the impedance contrasts between the different lithologies. Contacts between eclogite/peridotite and felsic rocks (gt-gneiss, granitic gneiss), in particular, may give rise to strong seismic reflections. In addition, shear-induced (lattice preferred orientation (LPO)-related) seismic anisotropy can increase reflectivity. For the explanation of the high velocity bodies (>6.4 km/s) around 1000 m and below 3200-m depth, large proportions of eclogite/peridotite (about 40 and 30 vol.%, respectively) are needed.  相似文献   

Strike-slip fault bridge fluid pumping mechanism: insights from field-based palaeostress analysis and numerical modelling     

Michal Nem ok  Andreas Henk  Rodney A. Gayer  Sara Vandycke  Tanya M. Hathaway 《Journal of Structural Geology》2002,24(12)

We present a finite-element study of stress perturbation in evolving compressive and extensional strike-slip fault bridges. The results are compared with a fracture study of a compressive bridge at St Donats, UK. Horizontally interbedded calcareous mudstone and bioclastic calcilutite at St Donats have a distinct vertical permeability anisotropy. This sedimentary sequence behaves as a set of horizontal aquifers. The fluid flow in these aquifers is sensitive to mean stress gradients. Paleostress analysis of field fracture data, verified by finite-element modelling, indicates a rotation of σ₁ towards parallelism with boundary faults inside the growing compressive bridge. Boundary faults and bridge faults recorded numerous fluid flow events. The modelled mean stress pattern shows a regional maximum within the bridge and local maxima/minima pairs at boundary fault tips.Finite-element modelling of an extensional bridge indicates that σ₃ rotates towards parallelism with boundary faults. The mean stress pattern is similar to the pattern in compressive bridge but with maxima and minima locations interchanged. The stress patterns are reestablished by each stress build-up preceding the rupturation of the boundary faults throughout the development stages of strike-slip fault bridges. Mean stress gradients developed pre-failure control the fluid flow in fractures of the strike-slip fault system at and after the end of each stress build-up and the fluid flow in boundary faults post-failure. Fracture reactivation and new fracture generation within an evolving bridge is a process consisting of multiple successive events that retain the storage capacity of the bridge. Rupture and sealing of the main bounding-faults is a step-wise process that opens and closes fluid conduits between areas with different pressures.  相似文献   

Analyzing CO2 emissions mitigation by technology improvement in Central and Eastern Europe     

Diana Ürge-Vorsatz  Adam Szeszler 《GeoJournal》2002,57(3):211-226

As a legacy of the centrally planned economy, the economies in transition of Central and Eastern Europe (CEE) have a unique potential to reduce their greenhouse gas emissions through the improvement in their high energy intensities. Since much of this `low-hanging fruit' in energy-efficiency improvements can be highly cost-effective, many developed countries facing difficulties in meeting their greenhouse gas (GHG) emission targets domestically are eager to find such opportunities in the CEE region. Therefore, studies analysing the potentials and costs of carbon dioxide reduction through technology improvement in the region have come into the limelight. While there are a few excellent studies in the region aimed at analysing climate change abatement potentials, they all embark on different assumptions, methodologies and boundary conditions. It is hence difficult, if not impossible, to compare and analyse the results of these studies across different authors, countries or time horizons. Consequently, the purpose of this paper is to place four leading studies on GHG mitigation through technology improvement from the CEE region into an internationally comparable framework. Four studies were selected from three countries, Poland, Hungary and Estonia, which are all the results of major national and international efforts to assess costs and potentials of GHG reduction. The paper places their assumptions, methods and final results into a framework which enables policy-makers and project designers to compare these across geographical and technological boundaries. Since other studies from around the globe have been analysed in this framework in the literature, this paper provides a vehicle for the findings of these four studies to be compared to others worldwide. In addition, the paper highlights a few areas where similar studies to be completed in the future in the region may be enhanced by incorporating features used in GHG mitigation research in other parts of the world. This revised version was published online in July 2006 with corrections to the Cover Date.  相似文献   

Fluid permeability of sedimentary rocks in a complete stress–strain process     

J. -A. Wang  H. D. Park   《Engineering Geology》2002,63(3-4):291-300

The permeability of sedimentary rocks during triaxial compression tests was investigated to relate it to the complete strain–stress process. It was found that the permeability was not constant, but varied with the stress and strain states in the rocks. Prior to the peak strength, the permeability decreases with increasing load. A dramatic increase in permeability occurs during the strain softening period. In the present study, in situ measurements of fluid flow and pressure in floor strata was carried out in a double longwall mining face in the Yangzhuang colliery. These measurements show that both the strata pressure and the position with respect to the mining face influence the hydrogeologic properties. The permeability increased in the floor strata behind the mining face because those mining induced fractures opened as the strata pressure decreased. To better understand this change in hydraulic behavior around the mining faces, 3-D numerical modeling was carried out. The model provides the general picture of the stress distribution and failure zone both in the floor and roof strata. The field and model results demonstrate the importance of changes in the stress and strain states on the hydrogeology of a site.  相似文献   

Cathodoluminescence of authigenic albite     

Detlev K. Richter  Thomas G  tte  Dirk Habermann 《Sedimentary Geology》2002,150(3-4):367-374

Authigenic albites in carbonate rocks typically grow in a high-grade diagenetic to low-grade metamorphic environment and often show Roc-Tourné-twinning sensu Füchtbauer. Based on an investigation of four Middle to South European occurrences, they show Mn²⁺- and Fe³⁺-activated cathodoluminescence (CL), as revealed by combined high resolution spectroscopy of cathodoluminescence emission (HRS-CL), electron paramagnetic resonance (EPR), and proton-induced X-ray emission (μPIXE).  相似文献   

Documentary and Geological Records of Tsunamis in the Aegean Sea Region of Greece and their Potential Value to Risk Assessment and Disaster Management     

Dominey-Howes  Dale 《Natural Hazards》2002,25(3):195-224

Understanding the nature and impacts of tsunamis within the Aegean Sea region ofGreece is of importance to both the academic community and those organisationsconcerned with tsunami disaster management. In order to determine hazard and riskand consequently pre-plan mitigative strategies, it is necessary to analyse historical(documentary) and geological records of former tsunami events. Therefore, firstlythis paper provides a summary of the written sources of information on Aegeantsunamis paying particular attention to published catalogues. From the availabledata, it is noted that a large number of events have been reported during the last3500 years. Secondly, the paper provides a review of the published on-shore(terrestrial) geological records of tsunamis within the region. From this analysisit is seen that little geological evidence has been identified for the large numberof tsunamis reported in the catalogues. Thirdly, the paper considers the reliabilityof the written and geological records and how problems of accuracy, coverage,extent and reliability, may have potential implications for the estimation of hazardand risk. The paper concludes by making recommendations for disaster managers,geologists and historians to work closely together.  相似文献   

交流变频调速CD-2B型岩心钻机的研制          下载免费PDF全文

宋振波  李建华  刘凡柏 《探矿工程》2002,(3):23-26

介绍了交流变频调速CD－2B型岩心钻机研制情况，技术参数，主要特点及型式检验，生产试验等情况。  相似文献   

山地丘陵地区物探爆破孔钻机及配套机具的研究与开发          下载免费PDF全文

赵大军  孙友宏  侯传彬  薛军 《探矿工程》2002,(4):22-24

为满足我国山地丘陵地区物探爆破孔施工技术的要求，研究适合土层、岩层钻进用的钻机及工具，对钻机的配套设备进行了开发研究。分析了国内山地丘陵地区物探爆破孔施工技术现状，并着重介绍了研制设计内容及生产试验情况。  相似文献   

地质图空间数据库建设中的拓扑关系处理   总被引：2，自引：0，他引：2  

殷如新  周国祥彭晟 赵晓红 《湖南地质》2002,21(4):310-313

拓扑关系是空间数据库的核心。主要阐述拓扑关系的基本概念，详细介绍MAPGIS和ARC/INFO两大模块中，拓扑关系具体表现形式、处理方法及处理过程中的注意事项，形成了一套较为完善的工作流程，提高了工作效率，为今后的信息化提供了行之有效的工作方法。  相似文献