Torsional dynamic response of a large‐diameter pipe pile in viscoelastic saturated soil     

Changjie Zheng  Hanlong Liu  Xuanming Ding  Yaru Lv 《国际地质力学数值与分析法杂志》2014,38(16):1724-1743

An analytical solution is developed in this paper to investigate the dynamic response of a large‐diameter end‐bearing pipe pile subjected to torsional loading in viscoelastic saturated soil. The wave propagation in saturated soil and pile are simulated by Biot's two‐phased linear theory and one‐dimensional elastic theory, respectively. The dynamic equilibrium equations of the outer soil, inner soil, and pile are established. The solutions for the outer and inner soils in frequency domain are obtained by Laplace transform technique and the separation of variables method. Then, the dynamic response of the pile is obtained on the basis of the perfect contacts between the pile and the outer soil as well as the inner soil. The results in this paper are compared with that of a solid pile in elastic saturated soil to verify the validity of the solution. Furthermore, the solution in this paper is compared with the classic plane strain solution to verify the solution further and check the accuracy of the plane strain solution. Numerical results are presented to analyze the vibration characteristics and illustrate the effect of the soil parameters and the geometry size of the pile on the complex impedance and velocity admittance of the pile head. Finally, the displacement of the soil at different depth and frequency is analyzed. Copyright © 2014 John Wiley & Sons, Ltd.  相似文献   

大直径加重管绳索取心技术在页岩气勘探中的应用研究          下载免费PDF全文

朱恒银  王强  张正  蔡正水 《探矿工程》2016,43(10):160-164

根据页岩气、煤层气勘探对钻探技术的特殊要求,进行了大直径绳索取心技术的探索研究。文中重点介绍了加重管组合式绳索取心钻具的结构、作用原理及特点,以及施工试验效果。通过施工实践的启示,对大直径绳索取心技术的发展提出了几点认识。  相似文献   

The effect of specimen diameter size on uniaxial compressive strength,P-wave velocity and the correlation between them     

Amin Jamshidi  Mashalah Khamehchiyan  Reza Zarei Sahamieh 《Geomechanics and Geoengineering》2016,11(1):13-19

Estimation of uniaxial compressive strength (UCS) by P-wave velocity (V_P) is of great interest to geotechnical engineers in various design projects. The specimen diameter size is one of the main factors that influence rock parameters such as UCS and V_P. In this study, the diameter size of specimens that effect UCS and V_P is investigated. Moreover, the correlation between UCS and V_P are examined via empirical analysis. For this purpose, 15 travertine samples were collected and core specimens with a diameters size of 38, 44, 54, 64 and 74 mm were prepared. Then, uniaxial compressive strength and P-wave velocity tests were conducted according to the procedure suggested by ISRM (1981). It is concluded that the diameter size of the specimen has a significant effect on UCS and V_P. Moreover, it was found that the best correlation between relevant parameters obtained for the specimen diameter of 38 mm.  相似文献   

Effects of Column Diameter on Setting Behavior of Dredged Slurry in Sedimentation Experiments     

Yu-Feng Gao  Yuan Zhou  Da-yong Li 《Marine Georesources & Geotechnology》2016,34(5):431-439

This article investigates the influence of dimensions of a settling column on the settling mode and the settling rate. End conditions of the settling stage in the hindered settling were also analyzed. It was found that the settling mode in a column with a smaller diameter tends to be consolidation settling. The effect of a settling column wall decreases with increasing column diameter, and it can be ignored provided the column diameter is larger than 14.5 centimeters. For the difference in initial water content, the settling behavior of the slurry develops a different sensitivity to the diameter effect. The influence of column diameter reduces as the initial water content of the slurry becomes higher. It is suggested that the internal diameter of the column used in a sedimentation experiment should be 14.5 centimeters.  相似文献   

Main technical innovations of Songke Well No.2 Drilling Project     

《China Geology》2018,1(2):187-201

Songke Well No.2, one of the main part of the scientific drilling project in Songliao Basin, which was drilled 7018 m and acquired the part of cores continuously from the Low Cretaceous to the Carboniferous and the Permian from the 2843 m deep, can be considered as the deepest continental drilling project in Asia. Aiming at the features of longer well sections, larger diameters and multiple spud-ins for coring of Songke Well No.2, this project broke through the “coring in small diameter and reaming in large diameter” spud-in drilling-completion procedures which are always used in large-diameter-well coring for continental scientific drilling projects in domestic and overseas and the drilling method of short-single-cylinder roundtrip footage. At the same time, “coring in the same diameter and completing drilling at one single diameter” was achieved at all φ311 mm and φ216 mm coring sections of more than one thousand meters long, high-efficient operation with “drilling long footage with drill tools combined in multi-cylinders” was achieved at deep coring section. Four world drilling records were created which include more than a thousand meters continuous coring at φ311 mm, and the footage per roundtrip footage at φ311 mm, φ216 mm and φ152 mm is all more than 30 m, all of these breakthroughs reduced at least 300 days for this project; moreover, considering the characteristics of formations that the geothermal gradient is high in the drilled sections and the inside-well temperature is over 240°C after drilling completion, a formate-polymer water-based mud system was developed by compounding attapulgite and sodium bentonite and by adding independently developed high-temperature stabilizer, which can provide critical technical support for successful well completion at 7018 m in the super-high-temperature environment It is the first time that the water-based mud is operated at the working temperature higher than 240°C in China; Besides, considering the high-quality requirement on cores imposed by the project, the method “mechanical cored is charge” to discharge core nondestructively on the ground was worked out, and more than 4000 m scatheless cores were discharged out of the drill pipes while maintaining original stratum structures.  相似文献   

大口径绳索取心钻进工艺在页岩气地质调查川蔺参1井中的应用          下载免费PDF全文

蒋太平  李果民  肖华  沈林江 《探矿工程》2021,48(S1):269-274

为了获取参数井压裂设计的相关参数,需要对井眼进行阵列声波测井和微侧向电阻率测井,需要采取大直径岩心进行力学实验。采用固体岩心钻探取心工艺,钻孔口径难以达到物探测井仪器入井要求,岩心直径也不能满足实验要求,必须采用大口径取心工艺才能满足设计要求。同时,常规取心工艺难以满足页岩气勘探对岩心（页岩或者煤心）提升时间的要求,绳索取心工艺在这方面优势明显。本篇介绍了大口径绳索取心工艺在页岩气地质调查井川蔺参1井的成功应用,根据大口径绳索取心钻具的结构特点,结合目的层岩性特征,总结了合理的取心钻进工艺参数和技术保障措施,取得了较好的效果。  相似文献   

新型同径分层止水工艺在地热探采深井的应用          下载免费PDF全文

杨联锋  段云星 《探矿工程》2021,48(8):33-39

原平大营地热探采结合深井完钻井深3088 m,为探明494~3088 m变质岩地层的水文地质参数和水源补给情况,基于岩心和测井资料划分4个抽水试验段,且试验后需要恢复目的含水层。根据“一孔同径分层止水”原则,设计了管内止水托盘止水、管外止水伞止水的新型同径分层止水工艺。该工艺简化了井身结构,避免了管外投粘土球、注水泥等堵塞含水层的情况。现场实施表明,该工艺止水效果完全满足水文地质抽水试验要求,可为同类工程提供经验和借鉴。  相似文献   

地面大直径应急救援钻孔成孔工艺设计与分析     

郝世俊  莫海涛 《煤田地质与勘探》2021,49(1):277-284

地面大直径钻孔可作为井下被困人员的逃生通道,是矿山事故造成人员被困井下时重要的应急救援方案之一。而常规大直径工程孔以泥浆正循环、多级扩孔工艺为主成孔,无法满足救援要求。着眼于大直径孔救援逃生目的,阐明包括精准透巷、优化孔身结构、高效成孔和安全透巷等四项成孔工艺设计原则;以此为指导,针对覆盖层钻进、二开基岩层钻进、下套管及固井具体施工情况,分析了全套管钻进、导向孔下导管钻进及集束式潜孔锤扩孔钻进、浮力法下套管及内插法固井等技术;借用巷道围岩松动圈及塑性区成熟理论,视透巷钻进所破坏的塑性区岩体为潜在垮落体,进行顶板稳定校核,提出了安全透巷距离及位置等关键参数设计选取方法,为地面大直径应急救援钻孔施工提供技术支持。   相似文献   

超大超深灌注桩施工关键技术研究与应用     

刘金森  高慧广  朱神松  吴小勇 《中国煤炭地质》2021,(3):25-27

以深圳某项目桩基础施工为依托,综合考虑地质特点和施工工艺要求,对超大超深灌注桩在花岗岩地层施工开展了相关研究,并将研究成果应用到实际施工中,有效地解决了该类型桩基础施工中的难点,保证了项目的顺利实施,为后续类似项目提供了参考依据。  相似文献   

钻孔孔径的变化对γ测井解释含量的影响     

周明海 《铀矿地质》1989,5(2):102-107

钻孔孔径变化与矿床类型、钻进孔径、矿化岩性、矿层品位、矿层厚度、冲冼液的性质以及工程切穿矿层的时间有着密切的关系。孔径变化对γ测井解释含量、矿床储量的增减影响甚大。理论和实践证明,专门性的孔径测量,是提高γ测井质量、准确确定矿层品级的重要措施之一,对提高矿床经济效益也具有重要意义。  相似文献