双轨D-InSAR技术监测矿区地面沉降的应用     

杨乾坤 《北京测绘》2020,(1):100-103

合成孔径雷达差分干涉测量(Differential interferometry synthetic aperture radar,D-InSAR)技术在矿区地面沉降监测领域具有独特的优势和巨大的发展潜力。为分析并掌握济宁某矿区地面沉降的变化状况,选取具备高穿透植被能力的L波段的ALOS PALSAR数据,基于双轨D-InSAR技术对采煤塌陷进行动态监测,获取矿区的形变信息,并与水准数据进行对比分析,进而为有效的进行矿山地质环境保护与治理恢复提供一定的理论依据和技术支持。  相似文献   

Investigation of the ground displacement in Saint Petersburg,Russia, using multiple-track differential synthetic aperture radar interferometry     

《International Journal of Applied Earth Observation and Geoinformation》2020

Global sea level rise and local land subsidence might exacerbate the risk of flooding in coastal plains. Among other cities, this is also the case for the high-latitude city of St. Petersburg, which has long been threatened by flood events. To protect the urban area from storm surges, the Union of Soviet Socialist Republics (USSR) in 1978 approved the construction of the 25 km long Flood Prevention Facility Complex (FPFC), which was completed in 2011. The risk of flooding in the city area of St. Petersburg is amplified by the fact that large sections of the coastal area have been reclaimed from the sea. In this study, we investigate the temporal evolution of the ground displacement in St. Petersburg. To this end, we perform an extended analysis based on the application of a simplified version of the differential interferometric synthetic aperture radar technique, known as the minimum acceleration (MinA) approach. The MinA algorithm is a multi-satellite/multi-track interferometric combination technique that allows working with multiple sets of SAR images. The method allowed generation of time series of two-dimensional (2-D) (i.e. East-West and Up-Down) deformation of the terrain by processing two sequences of Sentinel-1A/B (S-1A/B) SAR images acquired from 2016 to 2018, along the ascending and descending flight passes. The Small BAseline Subset (SBAS) algorithm was independently applied to the two sets of SAR data to generate the relevant Line-Of-Sight (LOS)-projected ground deformation time series. Subsequently, the LOS-projected deformation products were geocoded and jointly combined. The results indicate that the deformation in the city is predominantly vertical (i.e. it is subsiding) with a maximum subsidence rate of about 20 mm/year corresponding to the newly sea-reclaimed lands. Finally, the error budget of the retrieved 2-D deformation time series has also been addressed.  相似文献   

基于多尺度相关性分析的InSAR对流层延迟误差改正算法     

何永红  靳鹏伟  舒敏 《地球信息科学学报》2020,22(9):1878-1886

针对合成孔径雷达干涉技术中对流层延迟误差会影响DEM精度的问题,提出采用小波多尺度相关性分析方法来减弱与高程相关的对流层延迟误差的影响,来提高合成孔径雷达干涉DEM的估计精度。该方法基于小波多分辨率分析理论,根据差分干涉相位不同组成的频率特性,利用小波分解重构均方根误差变化率确定分解层数,降低地形残差相位、噪声相位等对大气延迟误差相位估计的干扰,提取对流层延迟误差相位所在频带;然后结合对流层延迟误差相位和雷达坐标系下的DEM在不同尺度上的相关性定权并进行降权处理,重构解缠差分干涉图,改正差分干涉相位中与高程相关的对流层延迟的影响。采用本文方法对覆盖河南义马地区的2景ENVISAT ASAR数据进行处理,得到对流层延迟误差改正后的差分干涉图,估计的与高程相关的对流层延迟相位,与地形变化情况吻合。将对流层延迟误差改正后的干涉图用于DEM高程估计,结果显示本文方法重建的DEM与Aster GDEM的标准差由30.7 m提高到26.37 m,提高了InSAR DEM估计精度。  相似文献   

Asperity Height and Aperture of an Artificial Tensile Fracture of Metric Size     

K. Sakaguchi  J. Tomono  K. Okumura  Y. Ogawa  K. Matsuki 《Rock Mechanics and Rock Engineering》2008,41(2):325-341

Summary  A tensile fracture of about 1 m in length was created by indenting wedges in a block of granite, and the heights of the two fracture surfaces were measured using a large, non-contact surface profile measurement system with a laser profilometer to determine the aperture distribution of the fracture. Based on the measured data, the frequency characteristics of the asperity heights, the initial aperture (the aperture when the surfaces are in contact at a single point), and the size effect on the statistical properties were analyzed. The results can be summarized as follows:

1.

The relation between the power spectral density of the fracture surface and the spatial frequency shows linearity on a log–log plot and thus the fracture surfaces can be assumed to be fractal object. On the other hand, the power spectral of the initial aperture becomes almost constant for wavelengths greater than about 100 mm. Thus, the matedness between the two surfaces of a fracture of 1 m monotonously increases with wavelength.

2.

The standard deviation of the initial aperture increases with fracture size until the fracture size is about 200 mm, beyond which the standard deviation is almost independent of the fracture size. On the other hand, the mean initial aperture still increases when the fracture size exceeds 200 mm, since the initial aperture depends on the minimum value of the aperture, which decreases with the number of data points.

Authors’ address: Dr. Kiyotoshi Sakaguchi, Graduate School of Environmental Studies, Tohoku University, 6-6-20 Aramaki-Aza-Aoba, Aoba-ku, Sendai 980-8579, Japan  相似文献   

合成孔径雷达高度计的波形重跟踪与仿真试验分析     

翟振和  史灵卫 《测绘学报》2017,46(2):151-156

基于初步研究获得的合成孔径雷达高度计卷积模型,推导获得合成孔径雷达高度计波形关于时间偏移、合成上升时间、信号幅度3个参数偏导数的卷积计算公式,利用数值积分及傅里叶变换实现合成孔径高度计回波模型的重跟踪。在多个单位联合协同下,利用仿真轨道、对流层、电离层及潮汐等模型生成了合成孔径模式下的回波波形。对比表明,仿真生成的合成孔径模式下的回波波形与CryoSat-2卫星SAR模式下的回波波形整体形状一致。利用仿真波形数据进行重跟踪试验,结果表明在20Hz数据条件下(约350m分辨率),合成孔径模式下的重跟踪精度达到5cm,较之传统模式有一定的提高。  相似文献   

Forest classification and impact of BIOMASS resolution on forest area and aboveground biomass estimation     

《International Journal of Applied Earth Observation and Geoinformation》2017

The European Space Agency (ESA) is currently implementing the BIOMASS mission as 7th Earth Explorer satellite. BIOMASS will provide for the first time global forest aboveground biomass estimates based on P-band synthetic aperture radar (SAR) imagery. This paper addresses an often overlooked element of the data processing chain required to ensure reliable and accurate forest biomass estimates: accurate identification of forest areas ahead of the inversion of radar data into forest biomass estimates.The use of the P-band data from BIOMASS itself for the classification into forest and non-forest land cover types is assessed in this paper. For airborne data in tropical, hemi-boreal and boreal forests we demonstrate that classification accuracies from 90 up to 97% can be achieved using radar backscatter and phase information. However, spaceborne data will have a lower resolution and higher noise level compared to airborne data and a higher probability of mixed pixels containing multiple land cover types. Therefore, airborne data was reduced to 50 m, 100 m and 200 m resolution. The analysis revealed that about 50–60% of the area within the resolution level must be covered by forest to classify a pixel with higher probability as forest compared to non-forest. This results in forest omission and commission leading to similar forest area estimation over all resolutions. However, the forest omission resulted in a biased underestimated biomass, which was not equaled by the forest commission. The results underline the necessity of a highly accurate pre-classification of SAR data for an accurate unbiased aboveground biomass estimation.  相似文献   

基于Roberts梯度与HIS色彩空间的SAR图像伪彩色编码     

陈亚欣  武文波 《测绘与空间地理信息》2017,(4)

针对SAR灰度影像信息不丰富,不利于解译识别的问题,提出了一种基于Roberts梯度与HIS色彩空间的SAR图像伪彩色编码算法。首先,计算SAR图像的梯度图像,并确定梯度阈值T;然后,比较像素梯度与阈值的大小,大于阈值的像素按照Roberts梯度方法编码,否则按照基于HIS色彩空间方法编码;最后,对两种编码结果进行合成,得到最终伪彩色SAR图像。利用TerraSAR-X影像数据进行了实验验证,结果表明:本文研究的方法均能达到很好的伪彩色编码效果。  相似文献   

适于窄线三维地震资料的面炮方法   总被引：4，自引：6，他引：4  

陈树民  刘洪  李幼铭 《地球物理学进展》2001,16(3):58-67,T002

用小孔径波动方程叠前深度偏移完成大面积数据的成像，不仅总的计算量较大，而且成像畸变较严重。为了进行大孔径波动方程叠前深度偏移，必须将实际的小孔径资料合成大孔径资料，并解决大孔径资料的成像方法。AMO等合成孔径方法，数据合成方式简单，但成像方法是近似的且较复杂。面炮方法从理论上讲数据合成方法较简单，成像方法是精确的且较简单，但其应用适用于远道振幅比近道弱很多的情况。在窄线三维地震资料情况，其联络测线方向不易满足面炮应用条件。针对这种情况，本文将最小二乘原理应用于波场成像，提出适用窄线三维地震资料的面炮方法。为了解三维波动方程叠前深度偏移的面炮方法解决复杂油气藏的可行性、所需计算资源和成像效果，我们利用大庆SW地区三维地震资料进行了实验研究。通过研究，我们获得了面炮方法的实际效果，获得了所需计算资源的测试数据。对实际效果的分析对比表明，面炮方法是一种三维波动方程叠前深度偏移的快速方法，有较好应用前景。  相似文献   

Linear flow behaviour of matched joints – case study on standard JRC profiles     

Mahdi Zoorabadi  Serkan Saydam  Wendy Timms  Bruce Hebblewhite 《Geomechanics and Geoengineering》2016,11(3):189-200

Roughness on rock joints produces a variable aperture across the joints and increases the flow path length. These conditions should be taken into account for a good approximation from cubic law. In this paper, the concept of local true aperture and tortuosity is applied to assumed joints where surfaces are matched to each other and correspond with standard Joint Roughness Coefficient (JRC) profiles. Furthermore, the hydraulic behaviour of JRC profiles is studied by a new laboratory experiment setup. The analytical approach provides new insights into the effects of roughness on hydraulic properties of rock joints. The results indicate that for a constant mechanical aperture, both the minimum local aperture and hydraulic aperture decrease with increasing JRC. Furthermore, tortuosity and standard deviation of local true aperture increase with JRC increment. The trend obtained between different parameters and JRC shows an obvious fluctuation for JRC lower than 10. On one hand, the results of this study along with a critical review of previous studies demonstrate that JRC profiles cannot present a precise roughness increment when JRC is less than 10. A new laboratory setup was designed to study the flow behaviour of JRC profiles. The results obtained from laboratory experiments under linear flow conditions validate the accuracy of the applied analytical method.  相似文献   

六边形格网的快速傅里叶变换     

李亚路  贲进  王蕊  杜灵瑀 《测绘科学技术学报》2017,(6):607-611

全球离散格网系统是支持多源地球空间数据融合处理的新型数据模型,傅里叶变换是联系其空域与频域的纽带,对以格网系统为框架的遥感图像的增强具有重要意义。根据三孔六边形格网剖分方案,设计了一种规则六边形格网单元组合结构,并将该结构空间域的二维离散傅里叶变换转化为可以用蝶形算法加速的标准一维变换。采用遥感影像进行实验验证,结果表明本文提出的快速傅里叶变换算法正确、高效,其复杂度为N log2N。随着数据量增大,效率以指数函数形式提高。  相似文献