平台运动激励下钢悬链式立管触地点动态分析   总被引：1，自引：1，他引：0  

尤岩岩  白兴兰  王孟义 《海洋工程》2020,38(2):83-91

平台运动和管土相互作用是引起钢悬链式立管(Steel Catenary Riser,SCR)触地点动态响应和疲劳损伤的关键因素。基于竖向土抗力-埋深曲线和侧向库伦摩擦双线模型模拟SCR触地区管土作用,并考虑竖向海床刚度的退化,研究平台三维运动激励下SCR触地区的动态响应与疲劳寿命,相对于简单的单向运动激励和仅考虑竖向管土作用,更符合工程实际。计算结果表明:①三维管土作用下,平台垂荡运动对立管触地区的影响最大,纵荡运动次之,横荡的影响最小;②平台三维运动的耦合,在一定程度上可降低立管触地区的动力响应和疲劳损伤,若仅考虑垂荡运动,结果偏于保守;③非线性海床模型相对于线弹性海床,引起的立管触地区的应力幅值、位移幅值显著增加,虽然贯入位移较小,但土抗力较大,选用线弹性海床的计算误差较大。平台运动和海床强度对SCR触地点动态响应和疲劳损伤的影响较大,因此在SCR响应分析与设计中,准确选择海床模型和平台运动方式,对于预测立管的疲劳寿命具有重要意义。  相似文献   

钢悬链线立管清管过程触底段位移变化规律试验研究     

付云雷  朱霄霄  陈帅  刘然 《海洋工程》2020,38(5):91-98

钢悬链线立管（steel catenary riser， 简称SCR）是一种优质的深水开发设备，近几年广泛用于深海环境下油气资源的开采。在浮式平台的周期性升沉运动和海浪海流的载荷作用下，立管的触底区会产生较为严重的疲劳破坏问题。为保证深海立管的高效与安全运行，清管作业是一项必要的维护手段。目前对于清管载荷作用下钢悬链线立管的位移变化规律研究比较匮乏。基于ABAQUS有限元软件和缩比试验准则，设计并开展有关清管载荷作用下钢悬链线立管的位移变化规律的缩比模型试验研究，从清管载荷的大小和作用位置等角度分别研究立管的X向与Y向的位移变化特征。研究结果表明，清管器在立管的触底段中运行并逐渐靠近触底点的过程中，清管器所在立管处的X向与Y向的位移会产生逐渐减小的趋势；当改变清管载荷的大小时，对于立管的同一位置来说，清管载荷的变化会导致立管的X向位移产生较Y向位移更加显著的变化；在清管器通过立管某一位置的前后过程中，X向位移变化呈现先增大后减小的趋势，而Y向位移仅在清管器通过该处时会有明显的减小。  相似文献   

A vortex induced vibration of marine riser in waves     

LOU Min  DONG Wenyi  GUO Haiyan 《海洋学报(英文版)》2011,30(4):96-101

A marine riser transporting fluid in the Bohai Sea was selected as study object,using an experi-mental and numerical method to study its vortex induced vibration in waves. A similarity theory was used in the experiment to derive the experimental model from a practical model,the dy-namic response of a riser model was measured in waves. A corresponding numerical simulation was performed using a finite element method. Comparisons were made with the results between the experiment and the numerical simulation. Some valuable results were obtained.  相似文献   

Numerical Prediction of Vortex Induced Vibrations on Top Tensioned Riser in Consideration of Internal Flow     

郭海燕  李效民  刘晓春 《中国海洋工程》2008,22(4):675-682

In consideration of the effect of the internal flowing fluid and the external marine environmental condition on the vortex-induced vibration （VIV） of top tensioned riser （Till）, the differential equation is derived based on work-energy principles and the riser near wake dynamics is modeled by Facchinetti＇ s wake oscillator model. Then Galerkin＇ s finite element approximation is implemented to derive the nonlinear matrix equation of the coupled equations and file corresponding numerical programs are compiled which solve the coupled equations directly in the time domain. The comparison of the predicted results with the recent experimental results and the prediction of SHEAR7 is performed. The results show the validity of the proposed method on the prediction of VIV of deep water risers. The effect of internal flow on the dynamic characteristics and dynmnic response of the riser is analyzed and several valuable conelusions are drawn.  相似文献   

Instability Assessment of Deep-Sea Risers Under Parametric Excitation   总被引：1，自引：0，他引：1  

杨和振  李华军 《中国海洋工程》2009,23(4):603-612

This study deals with the nonlinear dynamic response of deep-sea risers subjected to parametric excitation at the top of a platform.As offshore oil and gas exploration is pushed into deep waters,difficulties encountered in deep-sea riser design may be attributed to the existence of parametric instability regarding platform heave motions.Parametric resonance in risers can cause serious damage which might bring disastrous accidents such as environment pollution,property losses and even fatalities.Therefore,th...  相似文献   

Numerical and Physical Investigation on Vortex-Induced Vibrations of Marine Risers   总被引：1，自引：2，他引：1  

郭海燕 娄敏董晓林  齐晓亮 《中国海洋工程》2006,20(3):373-382

1 .Introduction Risers ,in deep water and strong current environments ,are prone to vortex-induced vibrations(VIV) .Vortex-inducedforces may excite the risersintheir normal modes of transverse direction.Un-der the“lock-in”condition,large resonant oscill…  相似文献   

驳船横荡运动下海洋立管的动力响应   总被引：1，自引：0，他引：1  

董晓林  王法利  邢春雷  董晓政  娄敏 《海洋湖沼通报》2007,(3):143-149

海洋浮式生产系统下立管的受力情况复杂,国内的研究大多集中于两端固支或简支的情况。本文则以水面驳船的横荡运动作为立管上端的动力边界条件,将Matteo Luca Facchinetti的尾流振子模型与考虑外流涡激振动作用下海洋立管运动微分方程相结合,得到管道与流体的耦合振动方程,用Hermit插值函数将方程进行有限元离散,并用Newmark时程分析法及迭代法求解,得到管道各点的位移时程曲线。结果表明:立管的振动频率主要由上端驳船的运动频率所确定,随着驳船运动频率的增加,立管中点的位移幅值先增加后减小;在有动边界存在的条件下,改变外流流速对立管中点的位移幅值影响不大。  相似文献   

海洋立管抑振装置优化布置的实验研究   总被引：1，自引：0，他引：1  

郭海燕  李相环  张永波  李效民  李朋 《中国海洋大学学报(自然科学版)》2012,42(6):126-132

设计1种梯形截面的三螺旋导板抑振装置,在实验室大型水槽进行海洋立管涡激振动实验.通过改变这种抑振装置的覆盖方式和覆盖范围,研究梯形截面螺旋导板的不同覆盖方式和覆盖范围对抑制海洋立管涡激振动的作用.实验时用动态电阻应变仪采集立管模型横向和顺流向的动态响应数据,并利用雨流计数法对模型进行疲劳分析.实验结果表明:在外流流速相同的条件下,三螺旋导板各种覆盖方案对涡激振动都有抑制作用;随着螺旋导板覆盖率的增加,立管的振动减弱,疲劳寿命增加;覆盖螺旋导板的立管顺流向振动频率明显降低,横向振动频率当覆盖率较高时有所降低,覆盖率较低时基本没有变化.  相似文献   

内孤立波作用下顶部张紧式立管动力特性     

林忠义  尤云祥  曲衍  肖越  范模 《海洋工程》2012,30(2):20-25

基于内孤立波mKdV理论,采用考虑内流的细长杆动力学方程,结合改进的Morison公式,研究两层流体中内孤立波与顶张立管的相互作用问题。针对东沙群岛南部海域附近某实测内孤立波特征参数,计算分析在该内孤立波作用下某顶张立管的内孤立波载荷与运动响应,以及立管横截面弯矩及其应力的变化特性。研究表明,内孤立波不仅会对顶张立管产生突发性的冲击载荷以及大幅度水平变形,而且还会使其横截面弯矩及其应力显著增大。因此在深海立管的设计与应用中,内孤立波的影响是不可忽视的。  相似文献   

Numerical study on mode curvature for damage detection of a drilling riser using transfer matrix technique     

《Applied Ocean Research》2017

In order to prevent marine pipeline accidents caused by corrosion defect, crack or loose contact, the technique of non-destructive testing or examination (NDT or NDE) becomes great important in the flied of structural health monitoring (SHM) in ocean engineering. The objective of this study is to propose a numerical method to localize and size the structure damage of a drilling riser. One theoretical development is a simple and effective algorithm used for ocean risers’ mode extraction and damage detection based on the transfer matrix technique. The merits of the developed method are that damage of risers with different boundary conditions and variable cross-sections can be localized and sized. Additionally, the relationships between damage locations and modes are discussed by comparing mode shape difference, mode curvature and mode curvature difference. Numerical results show that mode curvature values of damaged elements have little influence on those of intact elements. Based on this fact, a damage index method is developed to evaluate damage severities and explore the influence of single and multiple damage severities on damage indexes. More importantly, the outcomes are verified to be accurate enough to indicate the feasibility and reliability of the numerical method by the standard FEM package.  相似文献