云南保山西邑铅锌矿找矿潜力分析   总被引：1，自引：0，他引：1  

孟富军  崔子良  赵庆红 《云南地质》2014,(1):14-18

位于全国首批47个国家整装勘查区之一的西邑铅锌矿,是近年来通过理论创新,实现深部隐伏铅锌矿体找矿突破的典型矿床.理论指导找矿,收集区域及矿产资料,以地质为主导,结合地、物、化、遥等资料,开展大比例尺地质填图、化探工作缩小工作靶区.结合多方法物探手段,布置钻探工程,取得找矿突破,总结了本区一些有效的找矿方法组合,为外围找矿指明了方向.  相似文献   

Trench effects on lateral p-y relations for pipelines embedded in stiff soils and rocks     

《Computers and Geotechnics》2017

Existing relationships for lateral backfill pressures on pipelines assume that the trench is adequately wide to contain the failure surface. This condition is commonly violated in design and construction practice, putting at risk the pipeline safety. In this context, size and shape effects for trenches excavated in stiff soils and rocks, are numerically investigated, through experimentally-calibrated parametric analyses. It is shown that, for narrow trenches, ultimate pressures and yield displacements may increase up to an order of magnitude compared to “infinite-trench” values, while excavation of inclined walls reduces the above detrimental effects. Simplified relations are developed to aid pipeline design.  相似文献   

杭州市典型土层剪切波速与埋深间的关系分析     

李敏  杨立国  陈海鹏  盛特奇 《震灾防御技术》2020,15(1):77-88

基于杭州市丰富的场地钻孔剪切波速资料,采用3种常见的剪切波速与埋深回归分析模型,分析杭州地区5类常规土在场地分类和场地未分类情况下的最优拟合公式和预测范围,并对推荐模型进行可靠性验证,对常规粉质粘土和粉砂进行地区差异性分析。研究结果表明:本文推荐的剪切波速与埋深关系公式具有良好的可靠性;地区、岩土类型和预测深度均对剪切波速与埋深关系模型的可靠性产生显著影响,故应用时应优先选用本地区统计模型,如若未有,则需根据已有资料,对选用模型进行岩土类型和适应预测深度范围验证,以保证所选模型的可靠性;受地区、岩土类型和预测深度的影响,考虑场地分类并不一定提高统计模型的预测精度,在实际工程应用中具有不确定性。  相似文献   

埋入源多道面波分析(MASW)中最小偏移距的估计方法   总被引：1，自引：0，他引：1       下载免费PDF全文

刘康  戴靠山  许强  翁渝峰  黄李观  赵逍  游庆瑜 《地球物理学报》2018,61(6):2421-2432

多道面波分析（MASW）法是一种被广泛使用的浅层地震勘探方法.为解决埋入源近场效应对MASW法应用的影响,本文分析了埋入源产生的Rayleigh波传播机制,探讨了MASW法的排列参数对地震记录的影响,提出了确定最小偏移距的经验公式.通过对实际地质模型的有限元模拟,验证了经验公式的合理性.在以经验公式为指导的野外实测中,利用多种方法提取了相对可靠的频散曲线,采用基阶和高阶面波联合反演,所得的一维速度结构与钻孔资料具有很强的相关性,表明本文发展的最小偏移距估计方法具有一定的实际应用价值.  相似文献   

Analytical expressions for the borehole seismic signatures excited by an explosive source buried in an elastic half‐space          下载免费PDF全文

Andrei M. Ionov 《Geophysical Prospecting》2018,66(Z1):161-174

Borehole guided waves that are excited by explosive sources outside of the borehole are important for interpreting borehole seismic surveys and for rock property inversion workflows. Borehole seismograms are typically modelled using numerical methods of wave propagation. In order to benchmark such numerical algorithms and partially to interpret the results of modelling, an analytical methodology is presented here to compute synthetic seismograms. The specific setup is a wavefield emanating from a monopole point source embedded within a homogeneous elastic medium that interacts with a fluid‐filled borehole and a free surface. The methodology assumes that the wavelength of the seismic signal is much larger than the borehole radius. In this paper, it is supposed that there is no poroelastic coupling between the formation and the borehole. The total wavefield solution consists of P, PP, and PS body waves; the surface Rayleigh wave; and the low‐frequency guided Stoneley wave (often referred as the tube wave) within the borehole. In its turn, the tube wave consists of the partial responses generated by the incident P‐wave and the reflected PP and PS body waves at the borehole mouth and by the Rayleigh wave, as well as the Stoneley wave eigenmode. The Mach tube wave, which is a conic tube wave, additionally appears in the Mach cone in a slow formation with the tube‐wave velocity greater than the shear one. The conditions of appearance of the Mach wave in a slow formation are formulated. It is shown that the amplitude of the Mach tube wave strongly depends on Poisson's ratio of the slow surrounding formation. The amplitude of the Mach tube wave exponentially decreases when the source depth grows for weakly compressible elastic media with Poisson's ratio close to 0.5 (i.e., saturated clays and saturated clay soils). Asymptotic expressions are also provided to compute the wavefield amplitudes for different combinations of source depth and source‐well offset. These expressions allow an approximate solution of the wavefield to be computed much faster (within several seconds) than directly computing the implicit integrals arising from the analytical formulation.  相似文献   

浅谈2.5D磁法反演估算铁矿资源量的多解性          下载免费PDF全文

李土雄  马兆同  赵法强 《山东国土资源》2011,27(7):34-38

2.5D磁法反演估算铁矿资源量,关键是在垂直磁异常走向上求拟合模型的截面积。该文利用一种常见模型拟合4种实测磁场,发现铁矿截面积与埋深和磁性大小有一定的规律:磁化强度一定时,截面积与埋深呈线性正相关;埋深一定时,截面积与磁化强度呈近似指数形式的反相关。固定深部或外围磁性体参数,单独考虑浅部或中间铁矿模型时也有这种规律。在无钻孔资料及磁性资料不清楚时,磁化强度100 000×10-3~150 000×10-3A/m为估算铁矿资源量的最佳磁参数。因磁法反演的多解性,此类方法适用于钻孔验证前的资源量估计。  相似文献