Small scale turbulent diffusion determined with underwater flow visualization     

Takashi Ichiye  James McGrath  Michael Carnes 《Pure and Applied Geophysics》1982,120(4):758-771

Dye plumes were generated at three depths in the seasonal thermocline between 7 and 11 m, 22 km south of Key West on 21 August 1980 and photographed at about 10 second intervals with an underwater camera system. Eleven pairs of consecutive pictures are analyzed to determine the mean current vertical shear and the width of the plumes by positioning reference points relative to the rod attached to the camera system. The relative distances of reference points are calibrated with the stereophotogrammetric method for one pair. The eddy diffusivity is calculated by use of a model of turbulent diffusion developed byTaylor (1921). Its values range from 5 to 25 cm²s^–1 for the plume widths ranging from 33 to 132 cm. The Richardson number is calculated for each pair of pictures with the vertical density gradient estimated from temperature profiles. Its values are higher than the critical value of 0.25 except for one case. The diffusivity was higher by orders of magnitude than the molecular one and indicates the presence of turbulence together with billow like features of the plumes in spite of high Richardson numbers. This suggests that the billow turbulence might be caused by effects of surface gravity waves and not by the Kelvin-Helmholtz instability.  相似文献   

实测天然气扩散系数在地层条件下的校正   总被引：6，自引：0，他引：6  

付广  张云峰  陈昕  薛永超 《地球科学进展》2001,16(4):484-489

在研究天然气在地下岩石中扩散机理及扩散系数测试方法的基础上，指出了实测天然气扩散系数与地层条件下的差异，利用实测饱和水和干样条件下人造石英粉砂岩的扩散系数值的比值与其物性之间的关系，利用爱因斯坦方程产实测天然气扩散系数的饱和介质转换和温度校正方法，该方法的实际应用表明，校正结果符合地质规律，表明该校正方法是可行的。  相似文献   

High-temperature creep in a Ni2GeO4: a contribution to creep systematics in spinel     

J. D. Lawlis  Y.-H. Zhao  S. Karato 《Physics and Chemistry of Minerals》2001,28(8):557-571

 High-temperature creep behavior in Ni₂GeO₄ spinel was investigated using synthetic polycrystalline aggregates with average grain sizes ranging from submicron to 7.4 microns. Cylindrical samples were deformed at constant load in a gas-medium apparatus at temperatures ranging from 1223 to 1523 K and stresses ranging from 40 to 320 MPa. Two deformation mechanisms were identified, characterized by the following flow laws: where σ is in MPa, d is in μm and T is in Kelvin. These flow laws suggest that deformation was accommodated by dislocation creep and grain-boundary diffusion (Coble) creep, respectively. A comparison with other spinels shows that an isomechanical group can be defined for spinels although some differences between normal and inverse spinels can be identified. When creep data for olivine and spinel are normalized and extrapolated to Earth-like conditions, spinel (ringwoodite) has a strength similar to olivine in the dislocation creep regime and is considerably stronger than olivine in the diffusion creep regime at coarse grain size. However, when grain-size reduction occurs, spinel can become weaker than olivine due to its high grain-size sensitivity (Coble creep behavior). Analysis of normalized diffusion creep data for olivine and spinel indicate that spinel is weaker than olivine at grain sizes less than 2 μm. Received: 18 June 2000 / Accepted: 3 April 2001  相似文献   

Diffusion and sorption experiments using a DKS permeameter   总被引：2，自引：0，他引：2  

C. F. Mahler  R. Q. Velloso 《Engineering Geology》2001,60(1-4):173-179

The analysis of contaminant transport through clay liner is a relevant aspect in the design of industrial, urban and mining waste disposal systems, since these areas must be designed and operated to prevent contaminating substances from reaching underground water systems in unacceptable concentrations. The design requires an estimate of the potential contaminant transport rate. However, before any attempt at quantification can be made, values for transport mechanism control parameters must be established. Clayey materials are frequently used as contaminant barriers. In these materials, which have low hydraulic conductivity, the main contaminant transport mechanism is molecular diffusion. Parameters controlling transport for these conditions are the diffusion coefficient and sorption parameters. These parameters depend on soil constituents and characteristics as well as on the chemical constitution of the contaminant. The great complexity of the factors involved makes it necessary to determine the parameters of each type of soil. This paper discusses an equipment called DKS permeameter (diffusion, convection, sorption), for the study of soil-contaminant transport mechanisms, designed at the Institute for Soil Mechanics of the Ruhr-University Bochum, and some results obtained from its use at COPPE/Federal University of Rio de Janeiro (UFRJ), Brazil. This equipment determines the effective diffusion coefficient and sorption parameter with a better reflection of field conditions. The soil under study is a mix of sodium–bentonite that has low hydraulic conductivity (k=10⁻⁹ cm/s) with adequate liner characteristics. The result indicated the relevance of determining sorption parameters for structured soils, since the sorption perceived from batch test results using pulverised soil represents maximum soil capacity. Designs based on this parameter would overestimate the attenuation capacity of the liner.  相似文献   

A diffusion approximation for a network of reservoirs with power law release rule     

J. E. Glynn  P. W. Glynn 《Stochastic Environmental Research and Risk Assessment (SERRA)》1996,10(1):17-37

A diffusion approximation for a network of continuous time reservoirs with power law release rules is examined. Under a mild assumption on the inflow processes, we show that for physically reasonable values of the power law constants, the system of processes converges to a multi-dimensional Gaussian diffusion process. We also illustrate how the limiting Gaussian process may be used to compute approximations to the original system of reservoirs. In addition, we study the quality of our approximations by comparing them to results obtained by simulations of the original watershed model. The simulations offer support for the use of the approximation developed here.  相似文献   

An approximate analytical solution for the deposition of heavy particles released from an elevated line source   总被引：1，自引：1，他引：1  

T. Bouvet  J. D. Wilson 《Boundary-Layer Meteorology》2006,119(1):1-18

This work re-examines and further develops an analytical solution for the deposition swath of heavy particles released in the atmosphere from an elevated source over uniform terrain, correcting the particle diffusivity for the crossing trajectory effect. The revised (approximate) analytical solution proves to be accurate within 20% over a wide range of micrometeorological conditions and particle size, despite its neglect of the turbulence component of the deposition flux. It compares very satisfactorily with experimental data and with the simulations of a Lagrangian stochastic model, provided the variable U(H)/w _g ≤7 (ratio of the mean horizontal wind speed at source height to the particle settling velocity). In this domain of validity, simple formulae relating the statistics of the deposition swath to U(H)/w _g are derived.  相似文献   

基于吸力量测确定膨胀土活动带和裂隙深度   总被引：5，自引：2，他引：5  

潘宗俊  谢永利  杨晓华  李志峰 《工程地质学报》2006,14(2):206-211

采用M itchell公式和裂隙扩展深度方程两种吸力法确定安康地区膨胀土大气影响深度和裂隙开展深度。其一通过对安康地区两处天然边坡开挖观测井,利用张力计进行不同深度处吸力值的现场量测,根据M itchell提出公式计算大气影响深度;其二根据非饱和土抗拉强度公式,建立膨胀土裂隙扩展深度方程,利用基质吸力量测结果求其理论解。结果表明,安康地区膨胀土吸力变化曲线随深度增加变幅减小,呈波浪式推移。M itchell公式确定安康地区膨胀土的大气影响深度为3.35m以内,裂隙深度方程确定裂隙开展深度为3.063.14m。利用M itchell公式计算大气影响深度与膨胀土断裂理论公式确定的裂隙开展深度结果接近。  相似文献   

Practical kinetic modeling of petroleum generation and expulsion     

John G. Stainforth 《Marine and Petroleum Geology》2009

Models for petroleum generation used by the industry are often limited by (a) sub-optimal laboratory pyrolysis methods for studying hydrocarbon generation, (b) over-simple models of petroleum generation, (c) inappropriate mathematical methods to derive kinetic parameters by fitting laboratory data, (d) primitive models of primary migration/expulsion and its coupling with petroleum generation, and (e) insufficient use of subsurface data to constrain the models. Problems (a), (b) and (c) lead to forced compensation effects between the activation energies and frequency factors of reaction kinetics that are wholly artificial, and which yield poor extrapolations to geological conditions. Simple switch or adsorption models of expulsion are insufficient to describe the residence time of species in source rocks. Yet, the residence time controls the thermal stresses to which the species are subjected for cracking to lighter species.  相似文献   

漂浮通量箱法和扩散模型法测定内陆水体CH_4和N_2O排放通量的初步比较研究   总被引：1，自引：0，他引：1       下载免费PDF全文

高洁  郑循华  王睿  廖婷婷  邹建文 《气候与环境研究》2014,19(3):290-302

采用漂浮通量箱法和扩散模型法同步地观测了模拟内陆水体在不同条件下的CH4和N2O的水-气交换通量,旨在比较两类方法取得结果的异同。结果显示:这两类方法所测得的绝大多数CH4排放通量都与水中溶解氧呈显著线性负相关(显著性系数P0.001)。同时N2O排放通量与表层水温及水中铵态氮、硝态氮、溶解碳和溶解氧的关系可用包含所有上述水环境因素的Arrhenius动力学方程来表达,这些因素可以共同解释86%~90%的N2O通量变化(P0.0001),且不同方法测定的N2O通量的表观活化能和对表层水温的敏感系数分别介于47~59 kJ mol-1和1.92~2.27之间;扩散模型法所获得的CH4和N2O通量分别是箱法测定值的13%~175%和15%~240%,差异程度因模型而异;不同模型取得通量间相差20%~1200%,平均相差2.3倍。上述结果表明:仅用一种模型方法来取得CH4或N2O排放通量易形成较大偏差;不同扩散模型法和箱法测定的通量在反映CH4和N2O排放的内在规律方面具有一致性,但它们对真实气体通量的测量是否都存在不同程度的系统误差,尚需进一步研究。  相似文献   

Two steps forward,two steps back: The role of innovation in transforming towards community-based marine resource management in Solomon Islands     

《Global Environmental Change》2014

In many coastal nations, community-based arrangements for marine resource management (CBRM) are promoted by government, advocated for by non-government actors, and are seen by both as one of the most promising options to achieve sustainable use and secure inshore fisheries and aquatic resources. Although there is an abundant literature on what makes CBRM effective, is it less clear how CBRM is introduced or develops as an idea in a community, and the process of how the idea leads to the adoption of a new resource management approach with supporting institutions. Here we aim to address this gap by applying an explicit process-based approach drawing on innovation history methodology by mapping and analysing the initiation and emergence of CBRM in five fishing-dependent communities in Solomon Islands. We use insights from the literatures on diffusion of innovation and transformability to define phases of the process and help guide the inductive analysis of qualitative data. We show the CBRM institutionalisation processes were non-linear, required specific strategies to move from one phase to the next, and key elements facilitated or hindered movement. Building active support for CBRM within communities depended on the types of events that happened at the beginning of the process and actions taken to sustain this. Matching CBRM to known resource management ideas or other social problems in the community, developing legitimate institutions and decision-making processes, strong continual interactions between key actors and the rest of the community (not necessarily NGO actors), and community members witnessing benefits of CBRM, all contributed to the emergence and diffusion of CBRM in the communities, and helped to overcome barriers to transformative change.  相似文献