Using GIS to develop a mobile communications network for disaster-damaged areas     

Youhei Kawamura  Ashraf M. Dewan  Bert Veenendaal  Masahiro Hayashi  Takeshi Shibuya  Itaru Kitahara 《International Journal of Digital Earth》2014,7(4):279-293

Communications network damage resulting from a large disaster causes difficulties in the ability to rapidly understand the current situation and thus make appropriate decisions towards mitigating problems, such as where to send and dispense emergency supplies. The research outlined in this paper focuses on the rapid construction of a network after a disaster occurs. This study suggests ZigBee and geographic information systems (GIS) technologies to resolve these problems and provide an effective communication system. The experimental results of the ZigBee network system are presented, examples are provided of the mapping and analysis undertaken using GIS for the disaster-stricken area of Tsukuba City, Japan, and the communications node arrangements are determined for this region. These results demonstrate the effectiveness of establishing such a communications system for supporting efforts to relieve disaster-damaged areas.  相似文献   

Fe–Mg partitioning between post-perovskite and ferropericlase in the lowermost mantle     

Takeshi Sakai  Eiji Ohtani  Hidenori Terasaki  Masaaki Miyahara  Masahiko Nishijima  Naohisa Hirao  Yasuo Ohishi  Nagayoshi Sata 《Physics and Chemistry of Minerals》2010,37(7):487-496

Fe–Mg partitioning between post-perovskite and ferropericlase has been studied using a laser-heated diamond anvil cell at pressures up to 154 GPa and 2,010 K which corresponds to the conditions in the lowermost mantle. The composition of the phases in the recovered samples was determined using analytical transmission electron microscopy. Our results reveal that the Fe–Mg partition coefficient between post-perovskite and ferropericlase (K _D^PPv/Fp) increases with decreasing bulk iron content. The compositional dependence of K _D^PPv/Fp on the bulk iron content explains the inconsistency in previous studies, and the effect of the bulk iron content is the most dominant factor compared to other factors, such as temperature and aluminum content. Iron prefers ferropericlase compared to post-perovskite over a wide compositional range, whereas the iron content of post-perovskite (X _Fe^PPv, the mole fraction) does not exceed a value of 0.10. The iron-rich ferropericlase phase may have significant influence on the physical properties, such as the seismic velocity and electrical conductivity at the core–mantle boundary region.  相似文献   

A compound-specific n-alkane δC and δD approach for assessing source and delivery processes of terrestrial organic matter within a forested watershed in northern Japan     

Osamu Seki  Takeshi Nakatsuka  Hideaki Shibata 《Geochimica et cosmochimica acta》2010,74(2):599-613

We measured molecular distributions and compound-specific hydrogen (δD) and stable carbon isotopic ratios (δ¹³C) of mid- and long-chain n-alkanes in forest soils, wetland peats and lake sediments within the Dorokawa watershed, Hokkaido, Japan, to better understand sources and processes associate with delivery of terrestrial organic matter into the lake sediments. δ¹³C values of odd carbon numbered C₂₃-C₃₃n-alkanes ranged from −37.2‰ to −31.5‰, while δD values of these alkanes showed a large degree of variability that ranged from −244‰ to −180‰. Molecular distributions in combination with stable carbon isotopic compositions indicate a large contribution of C3 trees as the main source of n-alkanes in forested soils whereas n-alkanes in wetland soil are exclusively derived from marsh grass and/or moss. We found that the n-alkane δD values are much higher in forest soils than wetland peat. The higher δD values in forest samples could be explained by the enrichment of deuterium in leaf and soil waters due to increased evapotranspiration in the forest or differences in physiology of source plants between wetland and forest. A δ¹³C vs. δD diagram of n-alkanes among forest, wetland and lake samples showed that C₂₅-C₃₁n-alkanes deposited in lake sediments are mainly derived from tree leaves due to the preferential transport of the forest soil organic matter over the wetland or an increased contribution of atmospheric input of tree leaf wax in the offshore sites. This study demonstrates that compound-specific δD analysis provides a useful approach for better understanding source and transport of terrestrial biomarkers in a C3 plant-dominated catchment.  相似文献   

Using sulfur isotopes to determine the sources of vermillion in ancient burial mounds in Japan     

Takeshi Minami  Akira Imai  Michiaki Bunno  Kunihiko Kawakami  Setsuo Imazu 《Geoarchaeology》2005,20(1):79-84

This study represents an attempt to determine the sources of vermillion found in ancient Japanese burial mounds of the 1st–6th centuries A.D., by comparing their ratios of sulfur isotopes with those of cinnabar ore samples collected in Japan and China. Cinnabar ore samples were taken from three mines in central Japan (Niu in Mie, Yamato in Nara, and Sui in Tokushima prefectures), and from Wanshan in China, where mining activity has been recorded back to the 6th century A.D. and earlier. When the ratios of a ³⁴S and ³²S were compared with the Canyon Diablo meteorite standard, a high δ³⁴S value of +22.6 ± 3.6‰ was found for the Wanshan mine, as opposed to low values ranging from −7.3 ± 1.9 to −2.1 ± 1.6‰ for the Japanese mines. The ratios of sulfur isotopes in vermillion collected from ancient Japanese burial mounds also divided into two groups. High ratios (+11.1 to +22.8‰) were found in 1st‐ and 2nd‐ century burials in the western regions of northern Kyushu and San'in, suggesting that local, powerful chiefs obtained vermillion through relations with China. Lower ratios (−8.4 to −2.0‰) were found in burials of the 2nd through 6th centuries in central Japan, where the ancient Yamato dynasty emerged as the first unified polity around the end of the 2nd century A.D. We, therefore, conclude that the Yamato dynasty exploited local sources of vermillion, rather than depending solely on China. The present study demonstrates the feasibility of determining sources of vermillion using sulfur isotope ratios, and the relevance of such findings for archaeological research. © 2005 Wiley Periodicals, Inc.  相似文献   

Determining the equation of state of the expanding Universe: inverse problem in cosmology     

Takashi Nakamura  Takeshi Chiba 《Monthly notices of the Royal Astronomical Society》1999,306(3):696-700

  相似文献   

Multicell Model for Ground Water Recharge Analysis: The Ibi River Basin, Japan     

Takeshi Sato  Junichi Kojima  Hugo A. Loaiciga 《Ground water》1999,37(1):58-69

  相似文献   

Ground temperature change observed at Unzen Volcano associated with the 1990–1995 eruption     

Ken'ichiro Yamashina  Takeshi Matsushima 《Journal of Volcanology and Geothermal Research》1999,89(1-4)

Ground temperature associated with eruptive activity of Unzen Volcano, southwestern Japan, was observed in a cave about 680 m west of the central vent. Based on the data during 1991–1996, eliminating the effects of seasonal change, the temperature rose to the highest level probably around the first half of 1992. Hereafter the temperature decreased gradually year by year at least up to the autumn of 1996, beyond the level recovered at the beginning of the lava extrusion in May 1991. Although it is not necessarily conclusive, the present observation suggests a possible rise in ground temperature prior to the commencement of the first phreatic eruption in November 1990. If so, a careful observation may help to predict future eruptions by detecting a precursory rise of the ground temperature in this volcano.  相似文献   

Phenocryst crystallization during ascent of alkali basalt magma at Rishiri Volcano, northern Japan     

Takeshi Kuritani 《Journal of Volcanology and Geothermal Research》1999,88(1-2)

Phenocrysts in volcanic rocks are commonly used to deduce crystallization processes in magma chambers. A fundamental assumption is that the phenocrysts crystallized in the magma chambers at isobaric and nearly equilibrium conditions, on the basis of their large sizes. However, this assumption is not always true as demonstrated here for a porphyritic alkali basalt (Kutsugata lava) from Rishiri Volcano, northern Japan. All phenocryst phases in the Kutsugata lava, plagioclase, olivine, and augite, have macroscopically homogeneous distribution of textures showing features characteristic of rapid growth throughout the crystals. Rarely, a core region with distinct composition is present in all phenocryst phases. Phenocrysts, excluding this core, are occasionally in direct contact with each other, forming crystal aggregates. The equilibrium liquidus temperature of plagioclase, the dominant phase (35 vol%) in the Kutsugata lava, can never exceed the estimated magmatic temperature, unless the liquidus temperature increases significantly due to vesiculation of the magma during ascent. This suggests that most phenocrysts in the Kutsugata lava were formed by decompression of the magma during ascent in a conduit, rather than by cooling during residence in a magma reservoir. In the magma chamber before eruption, probably located at depth of more than 7 km, only cores of the phenocrysts were present and the magma was nearly aphyric (<5 vol% crystals), though the observed rock is highly porphyritic with up to 40 vol% crystals. The Kutsugata magma is inferred to have been rich in dissolved H₂O (>4 wt.%) in the magma chamber, and liquidus temperatures of phenocryst phases were significantly suppressed. Large undercooling caused by decompression and degassing of the magma was the driving force for significant crystallization during ascent because of the increase in liquidus temperature due to vapor exsolution. Low ascent rate of the Kutsugata magma, which is suggested by pahoehoe lava morphology and no association of pyroclastics, gave sufficient time for crystallization. Furthermore, the large degree of superheating of plagioclase in the magma chamber caused plagioclase crystallization with low population density and large crystal size, which characterizes the porphyritic nature of the Kutsugata lava. Alkali basalt is likely to satisfy these conditions and similar phenomena are suggested to occur in other volcanic systems.  相似文献   

Deformation path of amygdules in basic schists in Itoshima area,northern Kyushu,Japan          下载免费PDF全文

Takeshi Ikeda 《Island Arc》2018,27(4)

A deformation path of amygdules in basic schists that underwent contact metamorphism in Itoshima area, northern Kyushu, Japan, has been revealed using shape and internal microstructure of the amygdules. The amygdules are filled mainly with plagioclase that was recrystallized during the contact metamorphism. Crystal size of the plagioclase decreases with increasing aspect ratio of the amygdules. Some amygdules with low‐aspect ratio contain plagioclase showing flat twin boundaries. This suggests that such amygdules were undeformed after peak of the contact metamorphism and preserved the strain accumulated until then, which probably includes prograde stage of the contact metamorphism and former regional Renge metamorphism. In contrast, the amygdules with high‐aspect ratio underwent superimposition of deformation taking place after peak of the contact metamorphism. The strain analysis shows the constriction types for the former amygdules while the plane‐strain types for the latter. This reveals a deformation path of the amygdules such that the constrictional strain before the peak of contact metamorphism was partially overprinted by later flattening strain, showing the apparent plane‐strain types.  相似文献   

Adjustable vertical vibration isolator with a variable ellipse curve mechanism          下载免费PDF全文

Takehiko Asai  Yoshikazu Araki  Kosuke Kimura  Takeshi Masui 《地震工程与结构动力学》2017,46(8):1345-1366

This paper presents a passive vertical quasi‐zero‐stiffness vibration isolator intended for relatively small objects. The present isolator has features of compactness, long stroke, and adjustability to various load capabilities. To realize these features, we use constant‐force springs, which sustain constant load regardless of their elongation, and propose a variable ellipse curve mechanism that is inspired by the principle of ellipsographs. The variable ellipse curve mechanism can convert the restoring force of the horizontally placed constant‐force springs to the vertical restoring force of the vibration isolator. At the same time as converting the direction, the vertical restoring force can be adjusted by changing the ratio of the semi‐minor axis to the semi‐major one of the ellipse. In this study, a prototype of a class of quasi‐zero‐stiffness vibration isolator with the proposed variable ellipse curve mechanism is created. Shaking table tests are performed to demonstrate the efficacy of the present mechanism, where the prototype is subjected to various sinusoidal and earthquake ground motions. It is demonstrated through the shaking table tests that the prototype can reduce the response acceleration within the same specified tolerance even when the mass of the vibration isolated object is changed. Copyright © 2017 John Wiley & Sons, Ltd.  相似文献