A Modeling Study of the Effects of Anomalous Snow Cover over the Tibetan Plateau upon the South Asian Summer Monsoon   总被引：1，自引：0，他引：1  

刘华强  孙照渤王举 闵锦忠 《大气科学进展》2004,21(6):964-975

The effect of anomalous snow cover over the Tibetan Plateau upon the South Asian summer monsoon is investigated by numerical simulations using the NCAR regional climate model (RegCM2) into which gravity wave drag has been introduced. The simulations adopt relatively realistic snow mass forcings based on Scanning Multi-channel Microwave Radiometer (SNINIR) pentad snow depth data. The physical mechanism and spatial structure of the sensitivity of the South Asian early summer monsoon to snow cover anomaly over the Tibetan Plateau are revealed. The main results are summarized as follows. The heavier than normal snow cover over the Plateau can obviously reduce the shortwave radiation absorbed by surface through the albedo effect, which is compensated by weaker upward sensible heat flux associated with colder surface temperature, whereas the effects of snow melting and evaporation are relatively smaller.The anomalies of surface heat fluxes can last until June and become unobvious in July. The decrease of the Plateau surface temperature caused by heavier snow cover reaches its maximum value from late April to early May. The atmospheric cooling in the mid-upper troposphere over the Plateau and its surrounding areas is most obvious in May and can keep a fairly strong intensity in June. In contrast, there is warming to the south of the Plateau in the mid-lower troposphere from April to June with a maximum value in May.The heavier snow cover over the Plateau can reduce the intensity of the South Asian summer monsoon and rainfall to some extent, but this influence is only obvious in early summer and almost disappears in later stages.  相似文献   

CO₂ solubility in dacitic melts equilibrated with H₂O-CO₂ fluids: Implications for modeling the solubility of CO₂ in silicic melts     

Harald Behrens  Susanne Ohlhorst  Michel Champenois 《Geochimica et cosmochimica acta》2004,68(22):4687-4703

The solubility of CO₂ in dacitic melts equilibrated with H₂O-CO₂ fluids was experimentally investigated at 1250°C and 100 to 500 MPa. CO₂ is dissolved in dacitic glasses as molecular CO₂ and carbonate. The quantification of total CO₂ in the glasses by mid-infrared (MIR) spectroscopy is difficult because the weak carbonate bands at 1430 and 1530 cm⁻¹ can not be reliably separated from background features in the spectra. Furthermore, the ratio of CO_2,mol/carbonate in the quenched glasses strongly decreases with increasing water content. Due to the difficulties in quantifying CO₂ species concentrations from the MIR spectra we have measured total CO₂ contents of dacitic glasses by secondary ion mass spectrometry (SIMS).At all pressures, the dependence of CO₂ solubility in dacitic melts on x^fluid_CO2,total shows a strong positive deviation from linearity with almost constant CO₂ solubility at x_CO2fluid > 0.8 (maximum CO₂ solubility of 795 ± 41, 1376 ± 73 and 2949 ± 166 ppm at 100, 200 and 500 MPa, respectively), indicating that dissolved water strongly enhances the solubility of CO₂. A similar nonlinear variation of CO₂ solubility with x_CO2fluid has been observed for rhyolitic melts in which carbon dioxide is incorporated exclusively as molecular CO₂ (Tamic et al., 2001). We infer that water species in the melt do not only stabilize carbonate groups as has been suggested earlier but also CO₂ molecules.A thermodynamic model describing the dependence of the CO₂ solubility in hydrous rhyolitic and dacitic melts on T, P, f_CO2 and the mol fraction of water in the melt (x_water) has been developed. An exponential variation of the equilibrium constant K₁ with x_water is proposed to account for the nonlinear dependence of x_CO2,totalmelt on x_CO2fluid. The model reproduces the CO₂ solubility data for dacitic melts within ±14% relative and the data for rhyolitic melts within 10% relative in the pressure range 100-500 MPa (except for six outliers at low x_CO2fluid). Data obtained for rhyolitic melts at 75 MPa and 850°C show a stronger deviation from the model, suggesting a change in the solubility behavior of CO₂ at low pressures (a Henrian behavior of the CO₂ solubility is observed at low pressure and low H₂O concentrations in the melt). We recommend to use our model only in the pressure range 100-500 MPa and in the x_CO2fluid range 0.1-0.95. The thermodynamic modeling indicates that the partial molar volume of total CO₂ is much lower in rhyolitic melts (31.7 cm³/mol) than in dacitic melts (46.6 cm³/mol). The dissolution enthalpy for CO₂ in hydrous rhyolitic melts was found to be negligible. This result suggests that temperature is of minor importance for CO₂ solubility in silicic melts.  相似文献   

Hydrothermal alteration and tectonic evolution of an intermediate- to fast-spreading back-arc oceanic crust: Late Ordovician Solund-Stavfjord ophiolite, western Norway     

Hege  Fonneland-Jorgensen  Harald  Furnes  Karlis  Muehlenbachs  Yildirim  Dilek 《Island Arc》2005,14(4):517-541

Abstract The Solund‐Stavfjord ophiolite complex (SSOC) in western Norway represents a remnant of the Late Ordovician oceanic lithosphere, which developed in an intermediate‐ to fast‐spreading Caledonian back‐arc basin. The internal architecture and magmatic features of its crustal component suggest that the SSOC has a complex, multistage sea floor spreading history in a supra‐subduction zone environment. The youngest crustal section associated with the propagating rift tectonics consists of a relatively complete ophiolite pseudostratigraphy, including basaltic volcanic rocks, a transition zone between the sheeted dyke complex and the extrusive sequence, sheeted dykes, and high‐level isotropic gabbros. Large‐scale variations in major and trace element distributions indicate significant remobilization far beyond that which would result from magmatic processes, as a result of the hydrothermal alteration of crustal rocks. Whereas K₂O is strongly enriched in volcanic rocks of the extrusive sequence, Cu and Zn show the largest enrichment in the dyke complex near the dyke–volcanic transition zone or within this transition zone. The δ¹⁸O values of the whole‐rock samples show a general depletion structurally downwards in the ophiolite, with the largest and smallest variations observed in volcanic rocks and the transition zone, respectively. δ¹⁸O values of epidote–quartz mineral pairs indicate 260–290°C for volcanic rocks, 420°C for the transition zone, 280–345°C for the sheeted dyke complex and 290–475°C for the gabbros. The ⁸⁷Sr/⁸⁶Sr isotope ratios show the widest range and highest values in the extrusive rocks (0.70316–0.70495), and generally the lowest values and the narrowest range in the sheeted dyke complex (0.70338–0.70377). The minimum water/rock ratios calculated show the largest variations in volcanic rocks and gabbros (approximately 0–14), and generally the lowest values and range in the sheeted dyke complex (approximately 1–3). The δD values of epidote (?1 to ?12‰), together with the δ¹⁸O calculated for Ordovician seawater, are similar to those of present‐day seawater. Volcanic rocks experienced both cold and warm water circulation, resulting in the observed K₂O‐enrichment and the largest scatter in the δ¹⁸O values. As a result of metal leaching in the hot reaction zone above a magma chamber, Zn is strongly depleted in the gabbros but enriched in the sheeted dyke complex because of precipitation from upwelling of discharged hydrothermal fluids. The present study demonstrates that the near intact effect of ocean floor hydrothermal activity is preserved in the upper part of the SSOC crust, despite the influence of regional lower greenschist facies metamorphism.  相似文献   

Tetrahedral Plots of the Phase Relations for Basalts     

Sven Maal?e  Richard N. Abbott Jr. 《Mathematical Geology》2005,37(8):869-893

The phase relations of quaternary systems are generally represented by projections onto ternary compositional planes. Such projections often obscure relationships that would only be evident in a three-dimensional tetrahedral plot. The tetrahedral plot requires that compositions of the minerals and melts be transformed into Cartesian coordinates. It is shown here how this transformation is carried out. The application is demonstrated by tetrahedral plots of experimental melt compositions of partially molten lherzolite. Furthermore, the plot can be used to evaluate whether or not a particular basaltic composition represents a primary melt. The methods are applicable to any four-component system.  相似文献   

Stress Analysis in Boreholes Drag Bh and Leknes Bh,Nordland, North Norway     

Maria V. S. Ask  Daniel Ask  Harald Elvebakk  Odleiv Olesen 《Rock Mechanics and Rock Engineering》2015,48(4):1475-1484

  相似文献   

Analysis of seafloor backscatter strength dependence on the survey azimuth using multibeam echosounder data     

Xavier?LurtonEmail authorView author&#;s OrcID profile  Dimitrios?Eleftherakis  Jean-Marie?Augustin 《Marine Geophysical Researches》2018,39(1-2):183-203

The sediment backscatter strength measured by multibeam echosounders is a key feature for seafloor mapping either qualitative (image mosaics) or quantitative (extraction of classifying features). An important phenomenon, often underestimated, is the dependence of the backscatter level on the azimuth angle imposed by the survey line directions: strong level differences at varying azimuth can be observed in case of organized roughness of the seabed, usually caused by tide currents over sandy sediments. This paper presents a number of experimental results obtained from shallow-water cruises using a 300-kHz multibeam echosounder and specially dedicated to the study of this azimuthal effect, with a specific configuration of the survey strategy involving a systematic coverage of reference areas following “compass rose” patterns. The results show for some areas a very strong dependence of the backscatter level, up to about 10-dB differences at intermediate oblique angles, although the presence of these ripples cannot be observed directly—neither from the bathymetry data nor from the sonar image, due to the insufficient resolution capability of the sonar. An elementary modeling of backscattering from rippled interfaces explains and comforts these observations. The consequences of this backscatter dependence upon survey azimuth on the current strategies of backscatter data acquisition and exploitation are discussed.  相似文献   

Real-time retrieval of precipitable water vapor from GPS and BeiDou observations   总被引：3，自引：2，他引：1  

Cuixian Lu  Xingxing Li  Tobias Nilsson  Tong Ning  Robert Heinkelmann  Maorong Ge  Susanne Glaser  Harald Schuh 《Journal of Geodesy》2015,89(9):843-856

  相似文献   

Characterization of Frequency and Aggregation of the Antarctic Krill (<Emphasis Type="Italic">Euphausia superba</Emphasis>) Using Acoustics     

Seok-Gwan?Choi  Eun-A?Yoon  Doo-Hae?An  Sangdeuk?Chung  Jaebong?Lee  Kyounghoon?LeeEmail author 《Ocean Science Journal》2018,53(4):667-677

In this study, the dB difference and characteristics of krill swarms inhabiting Subarea 48.1, which includes the west and south of the South Shetland Island and the Elephant Island peripheries, were estimated to distinguish Antarctic krill, using acoustics. From April 13 to 24, 2016, acoustic data were collected along 24 survey lines using the frequencies 38 and 120 kHz, and middle trawling was performed at 7 stations. Using the difference between the dB values of two volume backscattering strength (Sv) frequencies (38 and 120 kHz), a clear acoustic distinction could be made between Antarctic krill (4.9 to 12.0 dB) and fish (?4.0 to ?0.2 dB). The distributions and mean Sv of krill swarms in the Elephant Island peripheries and south of South Shetland Island were higher than those in the west of South Shetland Island. The mean length/ height ratio of krill swarms in the west of the South Shetland Island (64.5) was higher than that in the south (35.9) and the Elephant Island peripheries (33.8), with the length of the aggregations exceeding their height. Most krill swarms were distributed between the surface layer (less than 10 m below sea level) and within 200 m of water depth. These results are expected to serve as baseline data for evaluating krill density and biomass by distinguishing them from fish, using acoustics.  相似文献   

Variability of West African monsoon patterns generated by a WRF multi-physics ensemble     

Cornelia Klein  Dominikus Heinzeller  Jan Bliefernicht  Harald Kunstmann 《Climate Dynamics》2015,45(9-10):2733-2755

  相似文献   

Spatially controlled Fe and Si isotope variations: an alternative view on the formation of the Torres del Paine pluton     

Norbert?A.?GajosEmail author  Craig?C.?Lundstrom  Alexander?H.?Taylor 《Contributions to Mineralogy and Petrology》2016,171(11):93

We present new Fe and Si isotope ratio data for the Torres del Paine igneous complex in southern Chile. The multi-composition pluton consists of an approximately 1 km vertical exposure of homogenous granite overlying a contemporaneous 250-m-thick mafic gabbro suite. This first-of-its-kind spatially dependent Fe and Si isotope investigation of a convergent margin-related pluton aims to understand the nature of granite and silicic igneous rock formation. Results collected by MC-ICP-MS show a trend of increasing δ⁵⁶Fe and δ³⁰Si with increasing silica content as well as a systematic increase in δ⁵⁶Fe away from the mafic base of the pluton. The marginal Torres del Paine granites have heavier Fe isotope signatures (δ⁵⁶Fe = +0.25 ± 0.02 2se) compared to granites found in the interior pluton (δ⁵⁶Fe = +0.17 ± 0.02 2se). Cerro Toro country rock values are isotopically light in both Fe and Si isotopic systems (δ⁵⁶Fe = +0.05 ± 0.02 ‰; δ³⁰Si = ?0.38 ± 0.07 ‰). The variations in the Fe and Si isotopic data cannot be accounted for by local assimilation of the wall rocks, in situ fractional crystallization, late-stage fluid exsolution or some combination of these processes. Instead, we conclude that thermal diffusion or source magma variation is the most likely process producing Fe isotope ratio variations in the Torres del Paine pluton.  相似文献