苏鲁超高压变质带岗上石榴石橄榄岩岩体：中国大陆科学钻探卫星孔（CCSD-PP3钻孔）初步研究   总被引：7，自引：4，他引：7  

杨经绥陈世忠  张仲明许志琴吴才来  刘福来李天福陈松永  陆永增 《岩石学报》2005,21(2):293-304

大陆科学钻探在江苏岗上超镁铁岩体上打了一个卫星孔(CCSD-PP3),孔深705m,穿透428m厚超镁铁岩体,其下主要为不同类型片麻岩及少量榴辉岩。该岩体产在苏鲁超高压变质带中,面积1370×700m,上覆约10m厚第四纪盖层。岩心柱可以粗分为4段,370m上部超镁铁岩,50m片麻岩夹榴辉岩,60m下部超镁铁岩,225m片麻岩类。榴辉岩夹在片麻岩中,片麻岩有正、副之分。榴辉岩石榴石中发现柯石英假象,表明岩石经历超高压变质作用。超镁铁岩主要岩性为纯橄岩和含石榴石纯橄岩,含石榴石纯橄岩出现3层,总厚度仅90m,与不舍石榴石的纯橄岩无截然界线。岩相学研究观测到石榴石中保留橄榄石、单斜辉石和尖晶石等超高压变质之前的矿物组合,以及退变质矿物替代石榴石的现象。岩石化学成分总体变化小,SiO242.17-44.79,平均43.78;MgO46.35-48.98,平均47.42,Mg#值(=Mg/(Mg Fe)×100)为91.89-92.75,平均92.4,属于高Mg型;Al2O3和CaO丰度低,分别为0.66-0.27,平均0.43,和0,01-0.35,平均0.13;REE总量较原始地幔亏损,但LREE相对HREE富集。结合矿物组合特征,说明这套岩石属亏损型,但可能经历了流体热液的改造;纯橄岩和含石榴石纯橄岩成分的一致型,说明后者是前者经变质改造形成。SHRIMPU-Pb定年测得含石榴石纯榄岩中锆石存在两组年龄,超高压变质阶段新形成的锆石时代为240±2.7Ma,核部残留岩浆锆石给出726±56Mao前者与区域上超高压变质年龄十分吻合,后者与大别-苏鲁区域上新元古代大规模花岗质岩浆侵位时代。岗上超镁铁岩体可能记录了早期侵位到地壳,在陆陆俯冲碰撞阶段被俯冲岩片带入到柯石英形成深度,以及随岩片折返到地表的整个历史。  相似文献   

新疆十红滩砂岩型铀矿床基本特征及成因分析   总被引：29，自引：9，他引：29  

权志高  李占双 《地质论评》2002,48(4):430-436

新疆十红滩铀矿床是中国近年发现的层间氧化带型砂岩铀矿床。该矿床位于吐鲁番—哈密盆地西南部的艾丁湖斜坡带西侧,赋矿地层为中侏罗统西山窑组辫状河—曲流河相的含煤碎屑岩系;矿体严格受发育于河道砂体中的层间氧化带前锋线控制,矿体形态呈卷状或板状;含矿岩石主要为灰—深灰色疏松和次疏松细—粗粒长石石英砂岩,铀主要以吸附形式存在;全岩Pb同位素测定的主成矿年龄为24 Ma。研究认为:晚侏罗世后,持续干热气候条件下,层间氧化带的充分发育,高含氧水在富铀地层砂体中持续向前运移,在富还原剂地球化学障形成铀沉淀富集,是该铀矿床的成因。  相似文献   

Structural damage detection using the optimal weights of the approximating artificial neural networks     

Shih‐Lin Hung  C. Y. Kao 《地震工程与结构动力学》2002,31(2):217-234

This work presents a novel neural network‐based approach to detect structural damage. The proposed approach comprises two steps. The first step, system identification, involves using neural system identification networks (NSINs) to identify the undamaged and damaged states of a structural system. The partial derivatives of the outputs with respect to the inputs of the NSIN, which identifies the system in a certain undamaged or damaged state, have a negligible variation with different system errors. This loosely defined unique property enables these partial derivatives to quantitatively indicate system damage from the model parameters. The second step, structural damage detection, involves using the neural damage detection network (NDDN) to detect the location and extent of the structural damage. The input to the NDDN is taken as the aforementioned partial derivatives of NSIN, and the output of the NDDN identifies the damage level for each member in the structure. Moreover, SDOF and MDOF examples are presented to demonstrate the feasibility of using the proposed method for damage detection of linear structures. Copyright © 2001 John Wiley & Sons, Ltd.  相似文献   

A mathematical hysteretic model for elastomeric isolation bearings     

J. S. Hwang  J. D. Wu  T.‐C. Pan  G. Yang 《地震工程与结构动力学》2002,31(4):771-789

An analytical model for high damping elastomeric isolation bearings is presented in this paper. The model is used to describe mathematically the damping force and restoring force of the rubber material and bearing. Ten parameters to be identified from cyclic loading tests are included in the model. The sensitivity of the ten parameters in affecting the model is examined. These ten parameters are functions of a number of influence factors on the elastomer such as the rubber compound, Mullins effect, scragging effect, frequency, temperature and axial load. In this study, however, only the Mullins effect, scragging effect, frequency and temperature are investigated. Both material tests and shaking table tests were performed to validate the proposed model. Based on the comparison between the experimental and the analytical results, it is found that the proposed analytical model is capable of predicting the shear force–displacement hysteresis very accurately for both rubber material and bearing under cyclic loading reversals. The seismic response time histories of the bearing can also be captured, using the proposed analytical model, with a practically acceptable precision. Copyright © 2002 John Wiley & Sons, Ltd.  相似文献   

Tests on low‐ductility RC frames under high‐ and low‐frequency excitations     

Ser‐Tong Quek  Chengmei Bian  Xilin Lu  Wensheng Lu  Haibei Xiong 《地震工程与结构动力学》2002,31(2):459-474

The response of low‐ductility reinforced concrete (RC) frames, designed typically for a non‐seismic region, subjected to two frequencies of base excitations is studied. Five half‐scaled, two‐bay, two‐storey, RC frames, each approximately 5 m wide by 3.3 m high, were subjected to both horizontal and/or vertical base excitations with a frequency of 40 Hz as well as a lower frequency of about 4 Hz (close to the fundamental frequency) using a shake table. The imposed acceleration amplitude ranged from 0.2 to 1.2g. The test results showed that the response characteristics of the structures differed under high‐ and low‐frequency excitations. The frames were able to sustain high‐frequency excitations without damage but were inadequate for low‐frequency excitations, even though the frames exhibited some ductility. Linear‐elastic time‐history analysis can predict reasonably well the structural response under high‐frequency excitations. As the frames were not designed for seismic loads, the reinforcement detailing may not have been adequate, based on the crack pattern observed. The effect of vertical excitation can cause significant additional forces in the columns and moment reversals in the beams. The ‘strong‐column, weak‐beam’ approach for lateral load RC frame design is supported by experimental observations. Copyright © 2001 John Wiley & Sons, Ltd.  相似文献   

Optimal design of passive energy dissipation systems based on H∞ and H2 performances     

J. N. Yang  S. Lin  J‐H. Kim  A. K. Agrawal 《地震工程与结构动力学》2002,31(4):921-936

Passive energy dissipation devices (EDDs), such as viscous dampers, viscoelastic dampers, etc., have been used to effectively reduce the dynamic response of civil infrastructures, such as buildings and bridges, subject to earthquakes and strong winds. The design of these passive energy dissipation devices (EDDs) involves the determination of the optimal locations and the corresponding capacities. In this paper, we present two optimal design methodologies for passive EDDs based on active control theories, including H_∞ and H₂ performances, respectively. The optimal design methodologies presented are capable of determining the optimal locations and the corresponding capacities of EDDs. Emphasis is placed on the application of linear matrix inequality (LMI) for the effective design of passive EDDs using the popular MATLAB toolboxes. One important advantage of the proposed approaches is that the computation of the structural response is not needed in the design process. The proposed optimal design methodologies have been applied to: (i) a 10‐storey building and a 24‐storey building both subject to earthquake excitations, and (ii) a 76‐storey wind‐excited benchmark building, to demonstrate the advantages of the proposed design methodologies over the conventional equal capacity design. Copyright © 2002 John Wiley & Sons, Ltd.  相似文献   

Study on effects of damping in laminated rubber bearings on seismic responses for a ⅛ scale isolated test structure     

Bong Yoo  Yang‐Hann Kim 《地震工程与结构动力学》2002,31(10):1777-1792

The effects of damping in various laminated rubber bearings (LRB) on the seismic response of a ?‐scale isolated test structure are investigated by shaking table tests and seismic response analyses. A series of shaking table tests of the structure were performed for a fixed base design and for a base isolation design. Two different types of LRB were used: natural rubber bearings (NRB) and lead rubber bearings (LLRB). Three different designs for the LLRB were tested; each design had a different diameter of lead plug, and thus, different damping values. Artificial time histories of peak ground acceleration 0.4g were used in both the tests and the analyses. In both shaking table tests and analyses, as expected, the acceleration responses of the seismically isolated test structure were considerably reduced. However, the shear displacement at the isolators was increased. To reduce the shear displacement in the isolators, the diameter of the lead plug in the LLRB had to be enlarged to increase isolator damping by more than 24%. This caused the isolator stiffness to increase, and resulted in amplifying the floor acceleration response spectra of the isolated test structure in the higher frequency ranges with a monotonic reduction of isolator shear displacement. Copyright © 2002 John Wiley & Sons, Ltd.  相似文献   

基于广义Kопытов模型及乙型水驱曲线的综合预测法     

张曙光  孙广闻等 《矿物岩石》2002,22(4):93-96

将广义Kопытов预测模型和乙型水驱曲线方法有机的结合起来，得到了油田开发中后期——递减时期的一种预测水驱开发油田的含水率、产油量、产水量及其相应的累积产量随开发时间变化的方法，此方法克服了在水驱油田预测开发指标中二者所存在的局限性。  相似文献   

Analysis of Post-Failure Slope Movements within the Framework of Hazard and Risk Analysis     

Vaunat  Jean  Leroueil  Serge 《Natural Hazards》2002,26(1):81-107

The paper first recalls briefly a methodological framework to assess landslide hazard and risk analysis in terms of predisposition, triggering andrevealing factors. This framework, that reflects the mechanisms involved in the landslide, is based on the Geotechnical Characterisation of slope movements proposed by Vaunat et al. (1994) and Leroueil et al. (1996). The Geotechnical Characterisation can be schematized by a 3-D matrix having the following axes: types of movement; types ofmaterial; and the four stages of movement: pre-failure, failure, post-failure andreactivation. For each relevant element of this 3-D matrix, there is a characterisationsheet including: the controlling laws and parameters, the predisposition factors, thetriggering or aggravating factors, the revealing factors and the consequences of the movement. The paper focuses afterwards on the post-failure stage, which generallyis the most destructive, and on the mobility index. It is shown that this laterindex can be described as the product of sub-indices associated with failure, brittlenessof the material, ability of the soil to develop pore pressures, geometry of the moving soil mass and characteristics of the terrain. It is also shown how these aspectscan be incorporated into the Geotechnical characterisation of slope movements. This seems to provide a rational basis for examining slope movements at the post-failure stage and assessing associated risks.  相似文献   

Where the buffalo roam: Boundaries and the politics of scale in the yellowstone region     

Jean Lavigne 《GeoJournal》2002,58(4):285-292

For more than twenty years, the state of Montana has pursued a controversial policy of lethal control to manage winter migrations of bison from Yellowstone National Park. In the late 1990s, as the state and a number of federal agencies attempted to cooperatively outline a more palatable scenario for bison management, local environmental groups became active participants in the debate. This paper examines the strategies pursued by these organizations in the course of their attempt to construct a new, ecosystem-level territorial space and jurisdictional scale for bison, and places their struggle within the context of existing work in geography on the politics of scale. Ultimately, the failure of their efforts illustrates some of the important constraints faced by social groups that attempt to create new territorial regimes and new scales of resistance in the interstices of existing political structures.  相似文献