Porphyry Copper Deposit Prognosis in the Middle Region of the Bangonghu–Nujiang Metallogenic Belt,Tibet, Using ASTER Remote Sensing Data     

《Resource Geology》2018,68(1):65-82

The B angonghu–N ujiang metallogenic belt is considered to be T ibet’s third copper belt after the Y ulong and G angdese copper belts. The D uolong gold‐rich porphyry copper deposit, located in the western part of the B angonghu–N ujiang belt was recently recognized as a superlarge prospect. The A dvanced S paceborne T hermal E mission and R eflection R adiometer (ASTER ) was used to characterize the D uolong porphyry deposit alteration area, and three methods, color enhancement, band ratio transformation, and spectral angle mapping, were utilized to extract the phyllic and argillic alteration zones, which are typically considered the most important predictors of porphyry copper. Seven prospecting areas, which match mapped alteration zones, were delineated in the D uolong deposit. In addition, an ASTER image of the eastern region of the B angonghu–N ujiang belt in the X iongmei area was used to extract alteration information, and an area with image characteristics similar to the D uobuza and B olong ore deposits was identified as a prospecting area. Numerous malachite outcrops were identified in the field, and both laboratory analysis and isotopic dating confirmed that the deposit had formed concurrently with the D uobuza deposit (119 M a). Geologic mapping at the 1:5000 scale was conducted in the area, and three types of ore‐bearing rocks were identified, indicating that this area has significant potential to host ore deposits. The discovery of the X iongmei copper mining area is significant for the B angonghu–N ujiang belt.  相似文献   

庐枞火山岩盆地南部拔茅山铜矿深部找矿潜力分析     

程培生  王芝水 《中国地质调查》2018,5(6):18-23

位于庐枞火山岩盆地南部的拔茅山铜矿,是细脉带蚀变岩型脉状铜矿的代表。研究表明,其深部具有斑岩型铜矿的勘探潜力。为了进一步明确其深部找矿潜力,针对研究区斑岩型、热液型铜多金属矿的岩体、断裂、接触带等主要控矿因素,利用高精度磁法和可控源音频大地电磁测深(CSAMT)成果,分别对拔茅山岩体的分布、产状和深部形态及其与围岩的接触带特征进行了剖析。在此基础上,通过与沙溪斑岩铜矿地质、物探异常特征的类比,指明了研究区的找矿方向和有利找矿部位,为进一步找矿提供了思路和依据。  相似文献   

四川省中厂铜矿矿床地质特征及成因讨论          下载免费PDF全文

张淑花 《地质找矿论丛》2018,33(1):46-53

四川省中厂铜矿位于扬子地台西南缘的康滇地轴中段,赋矿地层为中元古界下部的通安组,铜矿体赋存在通安组第二段和第三段中,铜矿体呈似层状,矿体围岩分别为白云石大理岩、石英变粒岩和含石英大理岩,地层中层间破碎带、滑动带和裂隙发育,并发生硅化、绢云母化、白云石化和褪色等热液蚀变,地层中碳质含量较高,矿床地质特征上判断,成矿经过沉积成岩期和构造-热液改造期,成矿物质为多期多来源,因此认为中厂铜矿床属于沉积-改造型铜矿床。  相似文献   

Ore-forming Fluid and Mineral Source of the Hongshi Copper Deposit in the Kalatage Area, East Tianshan, Xinjiang, NW China   总被引：1，自引：0，他引：1  

YU Mingjie  WANG Jingbin  MAO Qigui  FANG Tonghui  ZHANG Rui 《《地质学报》英文版》2018,92(5):1769-1783

The Hongshi copper deposit is located in the middle of the Kalatage ore district in the northern segment of the Dananhu-Tousuquan island-arc belt in East Tianshan, Xinjiang, NW China. This study analyses the fluid inclusions and H, O, and S stable isotopic compositions of the deposit. The fluid-inclusion data indicate that aqueous fluid inclusions were trapped in chalcopyrite-bearing quartz veins in the gangue minerals. The homogenization temperatures range from 108°C to 299°C, and the salinities range from 0.5% to 11.8%, indicating medium to low temperatures and salinities. The trapping pressures range from 34.5 MPa to 56.8 MPa. The δ18OH2O values and δD values of the fluid range from ?6.94‰ to ?5.33‰ and from ?95.31‰ to ?48.20‰, respectively. The H and O isotopic data indicate that the ore-forming fluid derived from a mix of magmatic water and meteoric water and that meteoric water played a significant role. The S isotopic composition of pyrite ranges from 1.9‰ to 5.2‰, with an average value of 3.1‰, and the S isotopic composition of chalcopyrite ranges from ?0.9‰ to 4‰, with an average value of 1.36‰, implying that the S in the ore-forming materials was derived from the mantle. The introduction of meteoric water decreased the temperature, volatile content, and pressure, resulting in immiscibility. These factors may have been the major causes of the mineralization of the Hongshi copper deposit. Based on all the geologic and fluid characteristics, we conclude that the Hongshi copper deposit is an epithermal deposit.  相似文献   

甘肃省肃南县桦树沟铁铜矿床地质特征及成矿模式     

李生全 《地质与勘探》2018,54(S1):1383-1391

甘肃北祁连西段桦树沟铁铜矿床是西北地区一个非常重要的铁铜矿床,对其地质特征及成矿模式的研究,将会对研究该成矿带铁铜矿床的成矿模式具有深远意义。通过大量的工作,认为桦树沟铁铜矿床为产于长城系上岩组的一套陆源碎屑岩夹碳酸沉积建造的同生海底喷流沉积矿床。铁矿体控矿构造主要是区域褶皱带,主要赋存于长城系上岩组的含铁细碎屑—粘土岩建造中,具体岩性为千枚岩。铜矿体的产出明显受后期韧性剪切带和层间滑动带共同控制,主要矿石类型有含铁碧玉岩型和蚀变千枚岩型两种。  相似文献   

河南省卢氏县八宝山铜矿床地质特征及成因     

冷小明 《地质与勘探》2023,59(1):70-84

河南省卢氏县八宝山岩体属晚侏罗世中酸性浅成小岩体。结合前人研究成果,通过研究该矿区地质特征和物化探成果,结合本次普查中对成矿理论的实地钻探工程验证,研究认为八宝山矿床类型为斑岩-矽卡岩型矿床,且矿床由内向外具有明显的高中低温分带性,矿床三种分带围绕岩体呈环状分布。成矿模式为以岩体中心相为中心至外侧边缘相,依次为斑岩型-矽卡岩型-热液型三条环带模式。研究区最新提交备案成果（普查）：铁矿石量2389.10万吨,硫铁矿石量334.00万吨,铜金属量108962,提交一中型铜矿床。通过研究该矿床成因及成矿模式,为研究区资源储量提升找到工作靶区,也为寻找相同类型矿床或者附近隐伏矿床提供借鉴依据。  相似文献   

川南早三叠世砂页岩型铜矿床沉积环境、成矿模式及对峨眉山地幔柱成矿系统的补充     

文俊  张航飞  刘治成  赵伟  竹合林  赵俊兴  刘洪  李复勇  赵凱莉  何永刚  张金元  钟强生 《矿床地质》2023,42(3):598-617

峨眉山地幔柱一直以来是国内外学者的研究热点之一,近年来对峨眉山地幔柱的成矿效应的关注度持续升高,但对提供成矿物源的矿床类型研究较少,特别是对砂页岩型铜矿的研究极少,砂页岩型铜矿稳定分布在沐川西部及西南部的飞仙关组底部,以往开展了大量的勘查工作,取得了较好的找矿成果,但其成矿物质来源还有较大争议。为厘清沐川地区飞仙关组底部砂页岩型铜矿床的富集规律、沉积环境和成因机制,本研究开展了野外实地调查、矿物学、岩相古地理与岩石地球化学等系统性研究,探讨其物源、富集规律、沉积环境,建立了成矿模式。研究结果表明,沐川地区砂页岩型铜矿体产出于早三叠世飞仙关组底部的一套灰绿色细碎屑岩中,主要矿石类型有粉砂质条带黏土岩型铜矿、泥质条带粉砂岩型铜矿、粉砂岩型铜矿和细砂岩型铜矿,矿石矿物以黄铜矿、斑铜矿、辉铜矿为主;沐川地区飞仙关组底部的沉积相属于有障壁型海岸相潮坪亚相,可识别出潮上泥坪微相、潮间混合坪微相、潮下砂坪微相和潮渠微相4种微相,Cu元素主要富集于粉砂质条带黏土岩和泥质条带粉砂岩等水动力条件较弱的潮间混合坪微相中,铜的富集严格受岩相古地理及沉积相的控制; Cu元素主要来源于峨眉山高钛玄武岩,西部的康滇古陆是主要的物源区;沐川地区飞仙关组底部砂页岩型铜矿属同生沉积型矿床,其成矿模式可分为峨眉山玄武岩喷溢（矿源层形成）阶段、风化剥蚀搬运阶段、沉积富集阶段和成岩保存阶段。上述成果,对西南地区进一步实现战略性矿产找矿突破和补充完善峨眉山地幔柱成矿系统具有重要意义。  相似文献   

西藏多不杂斑岩铜(金)矿床磁铁矿元素地球化学特征及其对成矿过程的指示     

付雪莲  唐菊兴  杨欢欢  王勤  梁鑫娟  张琪  董玉杰  宋家俊  李建力  王佳鑫  张荣坤 《地球学报》2023,44(3):498-510

多不杂铜(金)矿床是西藏多龙矿集区重要的斑岩型铜矿床之一。详细的岩心编录和岩相学研究显示,多不杂铜(金)矿床发育4类磁铁矿:磁铁矿-1(Mt₁)反射色呈灰白色,它形粒状,部分颗粒包含在黑云母内部;磁铁矿-2(Mt₂)反射色呈粉棕色,半自形-它形粒状,边缘被赤铁矿交代,颗粒内部见少量黄铜矿;磁铁矿-3(Mt₃)反射色呈粉棕色,自形-半自形,粒度小,表面平整,主要产于角岩化蚀变内;磁铁矿-4(Mt₄)反射色呈深灰色,颗粒间隙被黄铁矿、黄铜矿交代。Mt₁、Mt₂属岩浆磁铁矿或岩浆-热液磁铁矿的过渡类型;Mt₃、Mt₄属岩浆-热液磁铁矿的过渡类型。Mt₁、Mt₂、Mt₄磁铁矿形成温度大致在300～500℃,Mt₃形成温度明显低于其他三类磁铁矿,大致在200～500℃。4类磁铁矿具有明显的地球化学差异,其中Mt₁具...  相似文献   

Mineralization of the Liwu large-scale stratiform copper deposits in Sichuan Province,China: Constraints from fluid inclusions     

《China Geology》2023,6(2):252-268

The Liwu stratiform copper deposit is located in the northwestern Jianglang dome, western China. Current studies mainly focus on the genetic type and mineralization of this deposit. Detailed fluid inclusion characteristics of metallogenic period quartz veins were studied to reveal the ore-forming fluid features. Laser Raman analysis indicates that the ore-forming fluids is a H₂O-NaCl-CH₄ (-CO₂) system. Fluid inclusions microthermometry shows a homogenization temperature of 181–375°C and a salinity of 5.26%–16.99% for the disseminated-banded Cu-Zn mineralization; but a homogenization temperature of 142–343°C and a salinity of 5.41%–21.19% for the massive-veined Cu-Zn mineralization. These features suggest a medium-high temperature and a medium salinity for the ore-forming fluids. H-O isotopic data indicates that the ore-forming fluids were mainly from the metamorphic and magmatic water, plus minor formation water. And sulfur isotopic data indicates that sulfur was mainly derived from the formation and magmatic rocks. Metallogenesis of the disseminated-banded mineralization was mainly correlated with fluid mixing and water-rock reaction; whereas that of the massive-veined mineralization was mainly correlated with fluid boiling. The genetic type of the deposit is a medium-high temperature hydrothermal deposit related to magmatism and controlled by shear zones. This study is beneficial to understand the stratiform copper deposit.©2023 China Geology Editorial Office.  相似文献   

基于生命周期评价的铜尾渣资源化利用环境效益——以制取蒸压砖为例     

张旅  杨建新  刘晶茹  孟献昊 《岩石矿物学杂志》2022,41(5):950-958

我国每年产生的铜尾渣超过1 500万吨,持续堆存会造成严重的环境危害,而资源化处理则通常能够充分利用铜渣当中的资源并一定程度上降低环境危害。通过生命周期评价方法,对铜尾渣资源化利用制取蒸压砖并副产铜精矿、铁精矿和重介质的工艺过程的环境影响进行了分析。结果表明,该技术方案最主要的环境影响为人体毒性(33 886 kg 1,4-二氯苯当量 /资源化1 000吨铜尾渣);水泥生产阶段环境负荷最高,在7种环境影响类别中均有最高的贡献;贡献最明显的关键物质为氮氧化物,其对富营养化、酸化、光化学污染贡献占比分别为94.1%、42.0%和24.3%。将生产蒸压砖和副产的铜精矿、铁精矿、重介质所避免的环境影响纳入考虑范围之后,发现该铜尾渣资源化方案能够取得明显的环境效益。  相似文献