基于粘弹性球体地球模型的震后位移与重力变化计算软件     

付广裕  刘泰 《大地测量与地球动力学》2017,37(7):661-667

在考虑地球曲率、成层结构、可压缩性与自重的前提下,Tanaka等［1-2］提出一套较为完备的粘弹性球体位错理论,可计算全球任意位置由地震产生的同震与震后形变（含位移、重力变化、大地水准面变化）。Gao等［3］给出了与上述理论相匹配、界面友好的计算软件,能计算30个震后时间点对应的震后形变。本研究针对Gao等的软件进行改进,可计算震后任意时间点对应的震后形变。新软件由3个部分组成：1）与32个震后时间点相对应的32套离散格林函数数值框架;2）格林函数插值计算程序,可针对上述32套格林函数数值框架进行插值运算,输出任意震后时间点对应的格林函数数值结果;3）积分计算程序,调用上述格林函数数值结果,计算任意类型地震在地表任意位置产生的同震与震后形变。一般情况下,使用者只需按要求准备辅助文件,提供发震断层模型和观测站位置信息,以及震中周围地区地幔粘滞性因子,先后运行格林函数插值计算程序和积分计算程序,即可计算出目标地震在地表任意位置产生的同震与震后形变。本文基于粘弹球体位错理论与弹性球体位错理论,分别计算2011年日本MW9.0地震引起的远场同震位移,2套结果的高度一致性证明了新程序的正确性。最后,介绍需要注意的若干事项,便于使用者掌握该软件。  相似文献   

Vortical mechanism for collimation and acceleration of jets     

M. G. Abrahamyan 《Astrophysics》2008,51(3):357-371

A vortical mechanism for the collimation and acceleration of astrophysical jets is proposed on the basis of exact solutions of the hydrodynamic equations in a homogeneous gravitational field taking viscosity into account. Velocity profiles in the form of a jet structure with a uniformly rotating trunk whose pressure decreases in time, and longitudinal and converging radial flows of matter, are examined. Because of the radial flow, the angular velocity of the trunk and the velocity of the longitudinal flow of matter can accelerate exponentially or in the manner of an “explosive” instability. Flows of this type have low energy dissipation and can serve as unique channels for the acceleration and collimation of jet eruptions from young stars, as well as from active galactic nuclei and quasars. __________ Translated from Astrofizika, Vol. 51, No. 3, pp. 431–444 (August 2008).  相似文献   

Anisotropic cosmological models with bulk viscosity for variable <Emphasis Type="Italic">G</Emphasis> and Λ     

Subenoy Chakraborty  Anusua Roy 《Astrophysics and Space Science》2008,313(4):389-392

In this paper we have considered axially symmetric Bianchi-I, Kantowski Sachs and Bianchi-III space-time models with bulk viscosity, where the gravitational constant G and the cosmological term Λ vary with time. In Einstein equations this variation in G and Λ are taken in such a way as to preserve the energy momentum tensor. Solutions are obtained with the cosmological term varying inversely with square of time.  相似文献   

A comprehensive study on the parameters setting in smoothed particle hydrodynamics (SPH) method applied to hydrodynamics problems     

《Computers and Geotechnics》2017

Smoothed particle hydrodynamics (SPH) is a meshfree, Lagrangian particle method which has advantages in handling solids with extremely large deformation. Like any other numerical methods, cares must be taken to ensure its desirable accuracy and stability through considering several correction techniques in calculation. The selection of values for parameters in those correction approaches is a key step in SPH simulation, which is always difficult for new beginners to deal well with effectively. This paper examines the common inconsistency and instability problems in SPH method and studies its computational efficiency when applied to hydrodynamics problems with material strength like soil column collapse. We analyzed in detail how the correction techniques mitigate these inconsistency and instability problems. Also, the numerical testing results associate with different values for the parameters used in the correction techniques are provided for better understanding the influence of these parameters and for finding out the desirable values. It is found that (1) the SPH method is easily subjected to an inconsistency problem in the boundary area due to the boundary deficiency, and it can be treated well by adopting “virtual particles” contributing to the particle summations. (2) The numerical oscillation in SPH simulation can be mitigated effectively by artificial viscosity with the suggested parameter values. (3) The tension cracking treatment, artificial viscosity and artificial stress work well in removing the tensile instability problem in SPH method. In addition, the nearest neighboring particle searching (NNPS) algorithm, spacing ratio, smoothing length and time step influence the efficiency and accuracy of SPH method significantly. It is shown that SPH method with suggested parameters values can produce a very good result compared with the experimental result.  相似文献   

高温高盐高黏油藏缔合聚合物-表面活性剂二元驱技术     

庄永涛  刘鹏程  郝明强 《现代地质》2017,31(4):814

针对大港油田孔南地区高温、高盐、中低渗、稠油等制约化学驱提高采收率的瓶颈技术问题,以官109 1断块枣Ⅴ油组为目标油藏,在优选适合缔合聚合物和表面活性剂基础上,进行聚合物-表面活性剂二元驱技术室内实验和现场应用研究。通过室内实验优选,缔合聚合物AP P7和表面活性剂BHS 01二元体系溶液与常规体系相比,具有较好的耐温抗盐性,拓展了常规二元驱适用油藏的温度和矿化度范围;缔合聚合物经过岩心剪切后仍能够有效建立阻力系数和残余阻力系数;通过岩心驱替实验,体系能有效提高稠油油藏的采收率,拓宽了聚合物驱适用的原油黏度范围;矿场单井试注后,注入井注入压力和启动压力升高,纵向吸水剖面得到改善,说明该体系在高温高盐条件下仍能保持较高黏度,能够有效改善水油流度比,效果明显。  相似文献   

Rheological behavior of dredged slurries at high water contents     

Gui-Zhong Xu  Ying Zhang  Ruo-Bing Sun 《Marine Georesources & Geotechnology》2017,35(3):357-364

Each year in the world, there is significant amount of dredged slurries generated during geotechnical jobs. In the slurry storage process, the rheological behavior is a key factor affecting the motion of dredged slurries. To gain better understanding on this behavior, experiments on dredged slurries with different liquid limits are conducted using rotary viscometer. It has been found that, as water content increases, slurry property can change from Bingham plastic fluids to Newtonian fluids. In log–log coordinates, their corresponding yield stress and plastic viscosity are in linear relationship with their water contents and the intersection of these two lines can be treated as the turning point which is 4.7 times the liquid limit. The yield stress and plastic viscosity of different dredged slurries can be normalized efficiently using normalized water content. So, in this paper, a new quantitative prediction method for yield stress and plastic viscosity is proposed, which is effective for use in alkined modes of motion, is proposed.  相似文献   

Prediction of one-dimensional compression behavior of Nansha clay using fractional derivatives     

Hong-Hu Zhu  Guo-Xiong Mei  Bin Shi  Lei Gao 《Marine Georesources & Geotechnology》2017,35(5):688-697

Nansha clay is an interactive marine and terrestrial deposited soft clay that is widely spread in Guangzhou, Pearl River Delta, China. To avoid excessive settlement after construction, there is a need for better quantifying the time-dependent deformation of the soft clay. This paper presents a preliminary study to predict the one-dimensional compression of Nansha clay using fractional derivatives. A fractional Merchant model was introduced to describe the time-dependent settlement, and analytical solutions were obtained in terms of the Mittag-Leffler function. The oedometer test results were presented to validate this model. Compared with classical rheological models, the fractional derivative-based model enabled close estimation of the one-dimensional compression with fewer parameters. The meaning of the order of fractional derivative and its relationship with the clay physical properties were explored. It shows that a smaller value of this order corresponded to a higher coefficient of consolidation and a lower coefficient of secondary consolidation. The amplitude of both the primary and secondary consolidation of clay may be estimated quantitatively by the order of fractional derivative. Taken together, these results may open up new avenues for theoretical and empirical modeling of rheological phenomena in clay using fractional derivatives.  相似文献   

Determining Crustal Strength from Shoreline Deformation, Central Tibet     

SHI Xuhu  Eric KIRBY  Kevin P. FURLONG  MENG Kai  Erchie WANG  Ruth ROBINSON  LU Haijian 《《地质学报》英文版》2013,87(Z1):151-152

  相似文献   

Stress Fields in the Lithosphere for the Mantle Convection (S40RTS) with Varying Viscosity     

WANG Xinguo  William E. HOLT 《《地质学报》英文版》2013,87(Z1):159-159

  相似文献   

A dimensional analysis of scaling viscosity and velocity in DEM of constant strain rate tests on asphalt     

《Geomechanics and Geoengineering》2013,8(2):171-174

This paper presents the results from discrete element modelling (DEM) of an idealised (sand) asphalt mixture under constant strain rate (velocity) compressive loading using the Burgers viscoelastic model. Using dimensional analysis it is shown that the effect of scaling applied velocity is the same as that of scaling both viscosities in the Burgers model by the same factor. This has been shown to be the case for a bonded aggregate, and it also has been shown to be applicable even when bond breakage occurs within the sample. This scaling method will be of great benefit in modelling tests on asphalt under different constant strain rates, simply by scaling both viscosities to minimise computational time.  相似文献