Influence of compound bedforms on hydraulic roughness in a tidal environment   总被引：2，自引：0，他引：2  

Alice Lefebvre  Verner B. Ernstsen  Christian Winter 《Ocean Dynamics》2011,61(12):2201-2210

The effect exerted by the seabed morphology on the flow is commonly expressed by the hydraulic roughness, a fundamental parameter in the understanding and simulation of hydro- and sediment dynamics in coastal areas. This study quantifies the hydraulic roughness of large compound bedforms throughout a tidal cycle and investigates its relationship to averaged bedform dimensions. Consecutive measurements with an acoustic Doppler current profiler and a multibeam echosounder were carried out in the Jade tidal channel (North Sea, Germany) along large compound bedforms comprising ebb-oriented primary bedforms with superimposed smaller secondary bedforms. Spatially averaged velocity profiles produced log-linear relationships which were used to calculate roughness lengths. During the flood phase, the velocity profiles were best described by a single log-linear fit related to the roughness created by the secondary bedforms. During the ebb phase, the velocity profiles were segmented, showing the existence of at least two boundary layers: a lower one scaling with the superimposed secondary bedforms and an upper one scaling with the ebb-oriented primary bedforms. The drag induced by the primary bedform during the ebb phase is suggested to be related to flow expansion, separation, and recirculation on the downstream side of the bedform. Three existing formulas were tested to predict roughness lengths from the local bedform dimensions. All three predicted the right order of magnitude for the average roughness length but failed to predict its variation over the tidal cycle.  相似文献   

Effect of stress history on CPT and DMT results in sand     

Moon-Joo Lee  Sung-Kun Choi  Min-Tae Kim  Woojin Lee 《Engineering Geology》2011,117(3-4):259-265

In order to investigate the effect of stress history on in-situ test results in granular sediments, a series of CPTs and DMTs are performed on Busan sand prepared in the calibration chamber. K_D is found to be the most sensitive to the stress history among CPT and DMT measurements. E_D and q_c are observed to be similarly affected by the stress history and, therefore, the E_D–q_c relation appears to be almost independent of the stress history. The K_D–D_R relation established without considering the stress history is likely to overestimate the relative density of OC sand. It is shown that the existence of the pre-stress of the granular sediment can be indirectly recognized by an estimation of the relative density larger than 100% when using the K_D–σ_v′–D_R relation suggested for NC sand. Although q_c/σ_v′–K_D/K₀ and E_D/σ_v′–K_D/K₀ relations are heavily influenced by the stress history, q_c/σ_m′–K_D/K₀ and E_D/σ_m′–K_D/K₀ relations are observed to be independent of the stress history. Based on these relations, charts to evaluate the K₀ value from q_c and/or DMT indices are developed for both NC and OC sands. The design chart based on E_D/σ_m′–K_D/K₀ and E_D/σ_v′–K_D/K₀ relations is expected to be practically useful as the usage of this chart requires only DMT indices. The developed design charts are applicable to Busan sand but different sets of equations and charts may be developed for other sands.  相似文献   

Concurrent low- and high-affinity sulfate reduction kinetics in marine sediment     

Irene Harder Tarpgaard  Hans Røy  Bo Barker Jørgensen 《Geochimica et cosmochimica acta》2011,75(11):2997-3010

Bacterial sulfate reduction in marine sediments generally occurs in the presence of high millimolar concentrations of sulfate. Published data indicate that low sulfate concentrations may limit sulfate reduction rates below 0.2-2 mM. Yet, high sulfate reduction rates occur in the 1-100 μM range in freshwater sediments and at the sulfate-methane transition in marine sediments. Through a combination of ³⁵S-tracer experiments, including initial velocity experiments and time course experiments, we searched for different sulfate affinities in the mixed community of sulfate reducers in a marine sediment. We supported the radiotracer experiments with a highly sensitive ion chromatographic technique for sulfate with a detection limit of 0.15 μM SO₄²⁻ in marine pore water. Our results showed that high and low affinities for sulfate co-occur and that the applied experimental approach may determine the observed apparent half saturation constant, K_m. Our experimental and model data both show that sulfate reduction in the studied marine sediment could be explained by two dominating affinities for sulfate: a low affinity with a mean half saturation constant, K_m, of 430 μM SO₄²⁻ and a high affinity with a mean K_m of 2.6 μM SO₄²⁻. The high-affinity sulfate reduction was thermodynamically un-constrained down to <1 μM SO₄²⁻, both in our experiments and under in situ conditions. The reduction of radio-labeled sulfate was partly reversible due to concurrent re-oxidation of sulfide by Fe(III) and possibly due to a reversibility of the enzymatic pathway of sulfate reduction. A literature survey of apparent K_m values for sediments and pure cultures is presented and discussed.  相似文献   

Quantification of organic pollutant degradation in contaminated aquifers using compound specific stable isotope analysis – Review of recent developments     

《Organic Geochemistry》2011,42(12):1440-1460

Compound specific stable isotope analysis (CSIA) has been established as a viable tool for proving, characterizing and assessing degradation of organic pollutants within contaminated aquifers. The fractionation of stable isotopes during contaminant degradation leads to observable shifts in stable isotope ratios which can serve as an indicator for in situ pollutant degradation and allow for a quantitative assessment by means of the so-called Rayleigh (distillation) equation.This review highlights the recent developments of the Rayleigh equation approach for quantifying in situ degradation of organic pollutants in contaminated aquifers. The advantages and limitations of the Rayleigh equation approach are discussed and suggestions for improvements are given. Concepts are provided to estimate the uncertainty due to errors or variability of input parameters and how to deal with such uncertainty. Moreover, the applicability of the Rayleigh equation approach is evaluated regarding the heterogeneity and complexity of groundwater systems. For such systems, the review discusses the relevance of non-destructive processes, which affect the concentration (e.g., dispersive mixing) and potentially also the stable isotope ratio of contaminants (e.g., sorption, volatilization), and the resulting implications for the Rayleigh equation approach.  相似文献   

Trace fossils of a cyclic chalk-marl succession; the upper Maastrichtian Rørdal Member, Denmark     

B.W. Lauridsen  F. SurlykR.G. Bromley 《Cretaceous Research》2011,32(2):194-202

Trace fossils from an upper Maastrichtian cyclic chalk-marl succession, the Rørdal Member, exposed in the Rørdal quarry, Denmark, are analysed in order to test whether the changes in substrate lithology exerted any control over the ichnodiversity, tiering complexity, and density of the infauna. The cyclicity is interpreted as caused by orbital changes within the Milankovitch frequency band. The carbonate content varies between 71 and 82 weight% in the marl and 82-92 weight% in the chalk beds. The material is based on 19 samples collected from six chalk and marl beds. The investigated bedding-normal sample surfaces vary in area between 29 and 155 cm². Eight ichnogenera and two undetermined ichnogenera are recognised. The member is characterised by three ichnofabrics (A, B and C). The ichnofabric analysis is based on texture and internal structure of the sediments resulting from bioturbation. Ichnofabric A is found only in chalk samples and shows a poor preservation of trace fossils, whereas ichnofabric C is found in a few chalk and all marl samples and comprises a very dense, diverse and well preserved ichnofauna representing a high tiering complexity. Ichnofabric B represents an intermediate situation between ichnofabrics A and C and occurs in chalk samples immediately adjacent to marl beds. The observed changes in ichnofabrics between chalk and marl are related to the amount of clay in the samples and the differences in the occurrence of trace fossils are interpreted as due to differences in the visibility of traces between chalk and marl and not due to differences in ecological stress upon the endobenthic community of the two lithologies. The study thus provides an excellent example of how the effect of taphonomic factors may give a misleading and biased impression of apparent differences in the endobenthic community between chalk and marl.  相似文献   

Infiltration in unsaturated soils – An analytical approach     

Abdoul R. Ghotbi  M. Omidvar  A. Barari 《Computers and Geotechnics》2011

An approximate analytical solution has been established for the well known Richards’ equation for unsaturated flow of transports in soils. Despite the importance of Richards’ equation in geotechnical and geoenvironmental applications, most solutions to the problem are generally based on numerical methods often having limitations in application. It is therefore advantageous to explore analytical solutions to the problem. The proposed solution is based on homotopy analysis method (HAM). The method is superior over traditional perturbation techniques in a sense that it is not dependent on the assumption of a small parameter as the initial step. Several simple cases have been explored to describe the application of HAM to Richards’ equation. The results obtained by HAM are also compared with existing solutions to demonstrate the accuracy of the proposed method.  相似文献   

Leaching of metals from copper smelter flue dust (Mufulira,Zambian Copperbelt)     

Martina Vítková  Vojtěch Ettler  Jiri Hyks  Thomas Astrup  Bohdan Kříbek 《Applied Geochemistry》2011

The leaching behaviour of electrostatic precipitator dust from the Mufulira Cu smelter (Copperbelt, Zambia) was studied using a 48-h pH-static leaching experiment (CEN/TS 14997). The release of metals (Cd, Co, Cu, Ni, Pb and Zn) and changes in mineralogical composition using X-ray diffraction and PHREEQC-2 modelling were investigated in the pH range of 3–7. The highest concentrations of metals were released at pH 3–4.5, which encompasses the natural pH of the dust suspension (～4.3). About 40% of the total Cu was leached at pH 3, yielding 107 g/kg. Chalcanthite (CuSO₄·5H₂O), magnetite (Fe₃O₄) and delafossite (CuFeO₂) represented the principal phases of the studied dust. In contact with water, chalcanthite was dissolved and hydrated Cu sulphates precipitated at pH 4–7. Gypsum (CaSO₄·2H₂O) and secondary Fe or Al phases were observed in the leached residues. Serious environmental impact due to leaching may occur in dust-contaminated soil systems in the vicinity of the smelting plants.  相似文献   

Electric and magnetic fields in the astrophysics of wormholes     

V. S. Beskin  N. S. Kardashev  I. D. Novikov  A. A. Shatskii 《Astronomy Reports》2011,55(9):753-760

We consider the properties of electric and magnetic fields in vacuum in the neighborhood of static, spherically symmetric wormholes. Although certain aspects of this problem have been considered before, some important features remained undiscovered. We study in detail the properties of electric and magnetic fields in the case of quasi-adiabatic motion of field sources near an Ellis-Bronnikov wormhole and the passage of such sources through the wormhole. An exact solution is found in closed form for a wormhole immersed in a magnetic field that is homogeneous at infinity, as well as an exact solution for a dipolar field without sources. The properties of electromagnetic fields are important for possible observational manifestations of wormholes in astrophysics.  相似文献   

Crustal architecture beneath Madurai Block,southern India deduced from magnetotelluric studies: Implications for subduction–accretion tectonics associated with Gondwana assembly     

K. Naganjaneyulu  M. Santosh 《Journal of Asian Earth Sciences》2011,40(1):132-143

The Madurai Block in southern India is considered to represent the eroded roots of an arc-accretionary complex that developed during the subduction–collision tectonics associated with the closure of the Mozambique Ocean and final suturing of the crustal fragments within the Gondwana supercontinent in the Late Neoproterozoic–Cambrian. Here we present a magnetotelluric (MT) model covering the main collisional suture (Palghat–Cauvery Suture Zone) in the north into the central part of the Madurai Block in the south comprising data from 11 stations. Together with a synthesis of the available seismic reflection data along a N–S transect further south within the Madurai Block, we evaluate the crustal architecture and its implications on the tectonic development of this region. According to our model, the predominantly south dipping seismic reflectors beneath the Madurai Block define a prominent south-dipping lithological layering with northward vergence resembling a thrust sequence. We interpret these stacked layers as imbricate structures or mega duplexes developed during subduction–accretion tectonics. The layered nature and stacking of contrasting velocity domains as imaged from the seismic profile, and the presence of thick (>20 km) low resistivity layers ‘floating’ within high resistivity domains as seen from MT model, suggest the subduction of a moderately thick oceanic crust. We identify several low resistivity domains beneath the Madurai Block from the MT model which probably represent eclogitised remnants of oceanic lithosphere. Their metamorphosed and exhumed equivalents in association with ultrahigh-temperature metamorphic orogens have been identified from surface geological studies. Both seismic reflections and MT model confirm a southward subduction polarity with a progressive accretion history during the northward migration of the trench prior to the final collisional assembly of the crustal blocks along the Palghat–Cauvery Suture Zone, the trace of the Gondwana suture in southern India.  相似文献   

3-D assessment of peak-metamorphic conditions by Raman spectroscopy of carbonaceous material: an example from the margin of the Lepontine dome (Swiss Central Alps)   总被引：2，自引：0，他引：2  

Michael Wiederkehr  Romain Bousquet  Martin A. Ziemann  Alfons Berger  Stefan M. Schmid 《International Journal of Earth Sciences》2011,100(5):1029-1063

This study monitors regional changes in the crystallinity of carbonaceous matter (CM) by applying Micro-Raman spectroscopy to a total of 214 metasediment samples (largely so-called Bündnerschiefer) dominantly metamorphosed under blueschist- to amphibolite-facies conditions. They were collected within the northeastern margin of the Lepontine dome and easterly adjacent areas of the Swiss Central Alps. Three-dimensional mapping of isotemperature contours in map and profile views shows that the isotemperature contours associated with the Miocene Barrow-type Lepontine metamorphic event cut across refolded nappe contacts, both along and across strike within the northeastern margin of the Lepontine dome and adjacent areas. Further to the northeast, the isotemperature contours reflect temperatures reached during the Late Eocene subduction-related blueschist-facies event and/or during subsequent near-isothermal decompression; these contours appear folded by younger, large-scale post-nappe-stacking folds. A substantial jump in the recorded maximum temperatures across the tectonic contact between the frontal Adula nappe complex and surrounding metasediments indicates that this contact accommodated differential tectonic movement of the Adula nappe with respect to the enveloping Bündnerschiefer after maximum temperatures were reached within the northern Adula nappe, i.e. after Late Eocene time.  相似文献