Hydrothermal Fluid Sources of the Fengjia Barite–fluorite Deposit in Southeast Sichuan,China: Evidence from Fluid Inclusions and Hydrogen and Oxygen Isotopes          下载免费PDF全文

Hao Zou  Shou‐ting Zhang  An‐qing Chen  Yi Fang  Zhao‐fa Zeng 《Resource Geology》2016,66(1):24-36

The Fengjia barite–fluorite deposit in southeast Sichuan is a stratabound ore deposit which occurs mainly in Lower Ordovician carbonate rocks. Here we present results from fluid inclusion and oxygen and hydrogen isotope studies to determine the nature and origin of the hydrothermal fluids that generated the deposit. The temperature of the ore‐forming fluid shows a range of 86 to 302 °C. Our detailed microthermometric data show that the temperature during mineralization of the fluorite and barite in the early ore‐forming stage was higher than that during the formation of the calcite in the late ore‐forming stage. The salinity varied substantially from 0.18% to 21.19% NaCl eqv., whereas the density was around 1.00 g/cm³. The fluid composition was mainly H₂O (>91.33%), followed by CO₂, CH₄ and traces of C₂H₆, CO, Ar, and H₂S. The dominant cation was Na⁺ and the dominant anion Cl^‐, followed by Ca²⁺, SO₄^2‐, K⁺, and Mg²⁺, indicating a mid–low‐temperature, mid‐low‐salinity, low‐density NaCl–H₂O system. Our results demonstrate that the temperature decreased during the ore‐forming process and the fluid system changed from a closed reducing environment to an open oxidizing environment. The hydrogen and oxygen isotope data demonstrate that the hydrothermal fluids in the study area had multiple sources, primarily formation water, as well as meteoric water and metamorphic water. Combined with the geological setting and mineralization features we infer that the stratabound barite–fluorite deposits originated from mid–low‐temperature hydrothermal fluids and formed vein filling in the fault zone.  相似文献   

川西坳陷东坡沙溪庙组气藏成藏演化模式   总被引：1，自引：0，他引：1  

徐敏  刘建  林小云  熊山  牛斌莉 《现代地质》2018,32(5):953

川西坳陷东坡气藏主力产层为沙溪庙组,其圈闭类型以构造-岩性圈闭为主,多为致密砂岩储层,但断层发育,有效改善了储层物性,断砂匹配样式与构造演化对油气成藏过程有重要影响。基于前人已有的认识,通过沙溪庙组气藏成藏动力演化、气水分布特征及生烃期次分析,结合构造演化、成藏幕次等研究,认为沙溪庙组天然气成藏受构造古隆起、断砂配置、储层物性、构造演化影响,形成了“构造控向、断砂控运、储层控藏、演化控调”的成藏演化模式,同中存异,高庙子地区古构造的控制作用更为明显,而中江地区岩性控制作用占主导。沙溪庙组气藏间歇性充注具“燕山期三幕成藏,喜山期调整改造”的成藏特征,多期构造演化和较强的储层非均质性影响了含气饱和度,导致沙溪庙组气藏分布、气藏产能差异大。  相似文献   

四川江油马角坝刺林包剖面二叠-三叠系间粘土岩研究     

邓煜霖  郎兴海  崔志伟  王旭辉  娄渝明  韩鹏 《岩石矿物学杂志》2018,37(3):417-433

二叠-三叠纪之交华南地区普遍发育火山成因的粘土岩,其对于了解二叠纪末大规模火山活动及扬子板块碎屑物质来源具有重要意义。本文对扬子西缘马角坝刺林包剖面飞仙关组底部粘土岩进行了碎屑锆石U-Pb定年及原位Hf同位素测试、X衍射和全岩地球化学分析,以揭示粘土岩的岩石成分及物源信息。镜下特征、X衍射及主量元素特征表明岩石中粘土矿物主要为伊利石,含少量方解石、石英。碎屑锆石年龄显示,特征峰值年龄主要集中在2 615~2 383、1 868~1 328、1 186~778和430~246 Ma,并出现~250 Ma特征高峰,结合原位Hf同位素特征表明锆石与秦岭造山带、华南典型PTB剖面粘土岩及峨眉山大火成岩省具有较高的相似性。同时,通过微量、稀土元素分析发现粘土岩中Zr、Hf、Th、Cr、Co、Ti相对富集,与华南典型PTB粘土岩和峨眉山玄武岩相近,并结合构造背景及锆石特征,综合认为刺林包剖面PTB粘土岩来自于秦岭造山带及龙门山岛链局部剥蚀区、二叠纪末火山活动和峨眉山大火成岩省剥蚀岩体。  相似文献   

川西坳陷新场构造带须家河组超压演化与流体的关系   总被引：1，自引：0，他引：1  

黄丽飞  楼章华  陈明玉  朱蓉  王君 《地质通报》2018,37(5):954-964

沉积盆地超压体系是油气勘探与开发过程中一个不容忽视的问题,不仅影响了地质流体的运移和聚集,更为勘探带来安全隐患。以实测地压和油田水化学数据为基础,对川西坳陷新场构造带须四段和须二段现今地层水矿化度与现今压力系数关系进行比较,结合地层水特征系数和阴阳离子关系,综合前人研究结果,对须四段和须二段压力演化史与地层水演化过程进行分析,考察川西坳陷须家河组超压系统演化与地层水演化的耦合关系。结果表明,须家河组超压发育与地层水具有密切的联系:(1)须家河组储层段压力分布范围较广,在弱超压至超强压之间,须二段属于中超压而须四段属于超高压,平面分布中须二段探测井中矿化度随压力系数增加而减少,须四段则相反;(2)在压实过程中,由于流体排驱受阻导致"欠压实"超压的产生,随着超压的不断积聚,局部出现裂缝,导致地层水更加强烈的混合作用和运移;(3)生烃作用导致自生压力增大,地层水离子水岩作用强烈,造成流体包裹体与现今地层水离子成分分异;(4)构造挤压抬升过程中,须四段裂缝不发育,压力进一步升高,须二段则产生泄压,出现了凝析水和水侵现象,造成须四段和须二段现今地层水特征的差异。  相似文献   

Occurrence and conceptual sedimentary model of Cambrian gypsum-bearing evaporites in the Sichuan Basin,SW China   总被引：1，自引：0，他引：1  

Hong Liu  Xiucheng Tan  Yonghao Li  Jian Cao  Bin Luo 《地学前缘(英文版)》2018,9(4):1179-1191

During the Cambrian, gypsum-bearing evaporites formed in the Sichuan Basin, SW China. These rocks are important for oil and gas sealing, but details of their distribution and origin are not well established. This study examines the regional distribution and origin of the gypsum-bearing evaporites using a comprehensive analysis of drilling data from 34 wells, 5 measured cross-sections in the basin and surrounding area, and 96 maps of area-survey data. Results show that in the stratigraphic succession, the gypsum-bearing evaporites occur mainly in the Lower Cambrian Longwangmiao Formation, the Middle Cambrian Douposi Formation, and the Middle-Upper Cambrian Xixiangchi Group. Geographically, the rocks are found mainly in the southeastern part of the basin, and the distribution of deposits shows an overall SW-NE trend. The sedimentary environments for evaporite formation were evaporative lagoon and inter-platform basin in a platform setting. Gypsum was generated by the underwater concentration of sea water in a strongly evaporative environment. Both an evaporative restricted platform and a mixeddeposition restricted platform model appear to be applicable to the development of gypsum in the Sichuan Basin. The gypsum-bearing evaporites with the best sealing capacity are located mostly in the southeastern part of the basin. These constraints can be applied directly to regional exploration, and have implications for the regional paleogeography and paleoclimate.  相似文献   

川北地区寒武系筇竹寺组钙质结核裂缝充填物特征及指示意义   总被引：1，自引：0，他引：1  

冯明友  郑江  刘田  刘小洪  张家强  梅文华  孙霓源  龙涛 《地质论评》2018,64(3):711-722

川北地区寒武系筇竹寺组钙质结核泥页岩中早成岩期钙质结核较发育,结核裂缝中见多期次矿物充填。为揭示钙质结核裂缝形成机理,本次结合岩石学特征及地球化学特征等开展系统研究。川北筇竹寺组钙质结核裂缝中见三~四期矿物充填。第一期微晶方解石表面较脏,阴极发光暗淡,δ13C_(PDB)、δ18O_(PDB)平均值分别为-4.26‰及-7.69‰;第二期为细—中晶粒状方解石充填,阴极发光为橘黄色,流体包裹体均一温度为平均值为86.4℃,δ13C_(PDB)、δ18O_(PDB)平均值分别为-3.15‰及-7.41‰;第三期为粗晶方解石充填阴极发光暗淡,流体包裹体均一温度平均值为96.6℃,δ~(13)C_(_(PDB))、δ~(18)O_(_(PDB))平均值分别为-1.73‰及-10.28‰;第四期为重晶石充填。结合区域构造史—热演化史分析表明,钙质结核裂缝中四期充填物分别指示早期脱水、烃源岩早成熟期生烃、加里东构造运动抬升释压及深埋藏期硫酸盐热还原作用事件。  相似文献   

川西扎乌龙花岗伟晶岩型稀有金属矿床白云母花岗岩岩石地球化学特征   总被引：8，自引：0，他引：8  

李兴杰  李建康  刘永超  熊昌利 《地质论评》2018,64(4):1005-1016

扎乌龙花岗伟晶岩型稀有金属矿床位于四川西部石渠县呷依乡,矿区出露的白云母花岗岩岩体与含稀有金属伟晶岩脉有密切的时空关系及成因联系。本文对采自扎乌龙白云母花岗岩岩体的新鲜样品进行了全岩岩石地球化学分析,结果表明,该岩体岩石富硅(Si O_2=73.49%~74.78%)、富铝(Al_2O_3=14.37%~14.83%)、高钾(K_2O/Na_2O=1.14~1.91),贫Fe、Mg、Ti,里特曼指数(σ)3.3,铝饱和指数和Al_2O_3/Ti O_2(100)较高。以上特征表明该岩体属高压型高钾钙碱性强过铝质花岗岩。微量元素表现出Rb、U等正异常和Ba、Sr、Zr、Ti等负异常的特征;岩石稀土总量较低,具有明显的轻稀土富集,重稀土亏损的特征,且由于较明显的负铕异常(δEu=0.36~0.53)而呈现"V"型谷状。岩石高Rb/Sr(2.08~6.51)和Rb/Ba(1.53~3.26)、低Ca O/Na_2O(0.3)等地球化学特征,表明其来源于三叠系西康群泥质岩的脱水熔融,是同碰撞造山作用的产物。而扎乌龙式LCT型花岗伟晶岩,主要是由造山过程中变泥质岩部分熔融形成的强过铝质岩浆逐步演化而形成。  相似文献   

地震叠前反演方法预测页岩脆性指数在南川地区的应用     

单中强 《江苏地质》2018,42(2):291-297

页岩气的有效开发依赖水平井的压裂效果,而页岩脆性是影响页岩压裂的关键因素。通过对比分析现有的3种脆性指数计算方法,即矿物脆性指数计算法、岩石力学脆性指数计算法、基于多元回归脆性指数计算法,优选基于多元回归的脆性指数计算法计算五峰—龙马溪组(简称龙马溪组)页岩储层脆性指数。以四川盆地东部南川地区龙马溪组海相页岩气为例,利用南川地区三维地震资料叠前反演方法,获取多元回归脆性指数计算方程所需的参数,预测页岩脆性指数。结果表明,在已有钻井矿物脆性指标约束下,叠前反演法计算的脆性指数平面预测效果较好,且与实际压裂数据具有较好的一致性,能够满足南川地区页岩气勘探开发的需要。  相似文献   

四川省中厂铜矿矿床地质特征及成因讨论          下载免费PDF全文

张淑花 《地质找矿论丛》2018,33(1):46-53

四川省中厂铜矿位于扬子地台西南缘的康滇地轴中段,赋矿地层为中元古界下部的通安组,铜矿体赋存在通安组第二段和第三段中,铜矿体呈似层状,矿体围岩分别为白云石大理岩、石英变粒岩和含石英大理岩,地层中层间破碎带、滑动带和裂隙发育,并发生硅化、绢云母化、白云石化和褪色等热液蚀变,地层中碳质含量较高,矿床地质特征上判断,成矿经过沉积成岩期和构造-热液改造期,成矿物质为多期多来源,因此认为中厂铜矿床属于沉积-改造型铜矿床。  相似文献   

Development Phases and Mechanisms of Tectonic Fractures in the Longmaxi Formation Shale of the Dingshan Area in Southeast Sichuan Basin, China     

FAN Cunhui  HE Shun  ZHANG Yu  QIN Qirong  ZHONG Cheng 《《地质学报》英文版》2018,92(6):2351-2366

Shale gas has currently attracted much attention during oil and gas exploration and development. Fractures in shale have an important influence on the enrichment and preservation of shale gas. This work studied the developmental period and formation mechanism of tectonic fractures in the Longmaxi Formation shale in the Dingshan area of ??southeastern Sichuan Basin based on extensive observations of outcrops and cores, rock acoustic emission (Kaiser) experiments, homogenization temperature of fracture fill inclusions, apatite fission track, thermal burial history. The research shows that the fracture types of the Longmaxi Formation include tectonic fractures, diagenetic fractures and horizontal slip fractures. The main types are tectonic high-angle shear and horizontal slip fractures, with small openings, large spacing, low densities, and high degrees of filling. Six dominant directions of the fractures after correction by plane included NWW, nearly SN, NNW, NEE, nearly EW and NW. The analysis of field fracture stage and fracture system of the borehole suggests that the fractures in the Longmaxi Formation could be paired with two sets of plane X-shaped conjugate shear fractures, i.e., profile X-shaped conjugate shear fractures and extension fractures. The combination of qualitative geological analysis and quantitative experimental testing techniques indicates that the tectonic fractures in the Longmaxi Formation have undergone three periods of tectonic movement, namely mid-late Yanshanian movement (82–71.1 Ma), late Yanshanian and middle Himalaya movements (71.1–22.3 Ma), and the late Himalayan movement (22.3–0 Ma). The middle-late period of the Yanshanian movement and end of the Yanshanian movement-middle period of the Himalayan movement were the main fracture-forming periods. The fractures were mostly filled with minerals, such as calcite and siliceous. The homogenization temperature of fracture fill inclusions was high, and the paleo-stress value was large; the tectonic movement from the late to present period was mainly a slight transformation and superposition of existing fractures and tectonic systems. Based on the principle of tectonic analysis and theory of geomechanics, we clarified the mechanism of the fractures in the Longmaxi Formation, and established the genetic model of the Longmaxi Formation. The research on the qualitative and quantitative techniques of the fracture-phase study could be effectively used to analyze the causes of the marine shale gas fractures in the Sichuan Basin. The research findings and results provide important references and technical support for further exploration and development of marine shale gas in South China.  相似文献