Numerical Simulation of Magnetic Reconnection Driven by the Laser Helmholtz Capacitor-coil Targets     

XU Shan-shan  MEI Zhi-xing  ZHONG Jia-yong  LIN Jun 《Chinese Astronomy and Astrophysics》2021,45(2):131-146

  相似文献   

射电望远镜远场区域强干扰源规避方法研究          下载免费PDF全文

李欢  刘奇  王娜  蔡明辉  王玥  朱春花  苏晓明 《天文学报》2021,62(6):61

随着频率使用率的提高, 射电天文台址地面或空间存在强电磁干扰致使望远镜接收机系统处于非线性状态. 为减少强电磁干扰的影响、提高天文观测效率, 提出了一种基于望远镜远场区域的强干扰源规避方法. 首先, 通过仿真分析确定的射电望远镜远场方向图, 结合望远镜与干扰源之间的位置关系, 分析了强电磁干扰到达射电望远镜焦点处的功率响应, 并依据接收机第2阶中频放大器性能参数, 确定射电望远镜处于非饱和状态的规避角度计算方法. 其次, 采用该方法计算分析了民航飞机对射电望远镜的影响, 若民航飞机上有主动发射的干扰源, 且不经过反射等传播现象, 当射电望远镜主波束轴偏开一定方向后, 可有效降低对射电望远镜的干扰强度.  相似文献   

Runoff response of a small agricultural basin in the argentine Pampas considering connectivity aspects     

María Guadalupe Ares  Marcelo Varni  Celio Chagas 《水文研究》2020,34(14):3102-3119

  相似文献   

柱顶层间隔震体系增量动力响应研究          下载免费PDF全文

袁梦醒  陈望  刘彦辉  谭平  金建敏 《地震工程学报》2020,42(4):872-880

针对悬臂柱顶有拉梁和无拉梁层间隔震体系的抗震性能问题,运用增量动力分析(IDA)方法进行弹塑性分析,模拟结构从弹性到弹塑性直至最后倒塌的全过程。通过调幅地震动得到相应的层间位移角及峰值加速度,分别绘制单条与多条IDA曲线分析拉梁对隔震结构动力响应的影响,研究两种结构的抗震性能。结果表明:在相同性能点,有拉梁和无拉梁对纤维铰弯矩值和曲率值基本无影响,而在不同性能点,纤维铰状态明显不同;两种体系从正常使用阶段到防止倒塌阶段所需的加速度峰值的差距慢慢增大;在极罕遇地震下,柱顶有拉梁层间隔震体系的下部结构抗震性能要高于柱顶无拉梁层间隔震体系。  相似文献   

基岩倾角对盆地地震响应的影响分析          下载免费PDF全文

卓发成 《地震工程学报》2020,42(4):1035-1042

为了研究盆地基岩倾角对盆地地表动力反应的影响,选取了一个跨度2 km,深度500 m的二维成层盆地为研究对象进行有限元动力反应分析。以持时0.25 s的狄拉克脉冲作为输入地震动,探讨了P波和SV波垂直入射时,盆地基岩倾角从10°\,20°\,30°\,40°依次增加的情况下盆地地震反应。结果表明:入射波在倾斜基岩处发生波型转化,同时产生面波,在盆地中心区域发生汇聚;随着基岩倾角的增加地表中心处的卓越频率有减小的趋势。  相似文献   

电磁卫星地面对比观测原型系统地电场观测资料特征分析          下载免费PDF全文

周卫东  牛延平  田野  苏小芸  陈丽君 《地震工程学报》2020,42(6):1517-1522

通过对电磁监测试验卫星地面对比观测原型系统中古丰、寺滩和坪城地电场观测数据特征研究，结果表明：（1）3个台站的地电场观测数据均具有较为明显的正常日变化形态；（2）在磁暴发生期间，地电场各测向均记录到了同步的地电暴变化，其最大变幅均明显高于正常日变；（3）寺滩地电场记录到临震前的数据异常现象，在时间和空间上都与地震事件吻合较好。  相似文献   

The potential of Pléiades images with high angle of incidence for reconstructing the coastal cliff face in Normandy (France)     

《International Journal of Applied Earth Observation and Geoinformation》2020

To monitor chalk cliff face along the Normandy coast (NW France) which is prone to erosion, we tested the potential of cliff face 3D reconstruction using pairs of images with high angle of incidence at different dates from the agile Pléiades satellites. The verticality aspect of the cliff face brings difficulties in the 3D reconstruction process. Furthermore, the studied area is challenging mainly because the cliff face is north-oriented (shadow). Pléiades images were acquired over several days (multi-date stereoscopic method) with requested incidence angles until 40°. 3D reconstructions of the cliff face were compared using two software: ASP® and ERDAS IMAGINE®. Our results are twofold. Firstly, despite ASP® provides denser point clouds than ERDAS IMAGINE® (an average of 1.60 points/m² from 40° incidence angle stereoscopic pairs on the whole cliff face of Varengeville-sur-Mer against 0.77 points/m² respectively), ERDAS IMAGINE® provides more reliable point clouds than ASP® (precision assessment on the Varengeville-sur-Mer cliff face of 0.31 m ± 2.53 and 0.39 m ± 4.24 respectively), with a better spatial distribution over the cliff face and a better representation of the cliff face shape. Secondly, the quality of 3D reconstructions depends mostly on the amount of noise from raw images and on the shadow intensity on the cliff face (radiometric quality of images).  相似文献   

Regional soil organic carbon prediction model based on a discrete wavelet analysis of hyperspectral satellite data     

《International Journal of Applied Earth Observation and Geoinformation》2020

Most studies have the achieved rapid and accurate determination of soil organic carbon (SOC) using laboratory spectroscopy; however, it remains difficult to map the spatial distribution of SOC. To predict and map SOC at a regional scale, we obtained fourteen hyperspectral images from the Gaofen-5 (GF-5) satellite and decomposed and reconstructed the original reflectance (OR) and the first derivative reflectance (FDR) using discrete wavelet transform (DWT) at different scales. At these different scales, as inputs, we selected the 3 optimal bands with the highest weight coefficient using principal component analysis and chose the normalized difference index (NDI), ratio index (RI) and difference index (DI) with the strongest correlation with the SOC content using a contour map method. These inputs were then used to build regional-scale SOC prediction models using random forest (RF), support vector machine (SVM) and back-propagation neural network (BPNN) algorithms. The results indicated that: 1) at a low decomposition scale, DWT can effectively eliminate the noise in satellite hyperspectral data, and the FDR combined with DWT can improve the SOC prediction accuracy significantly; 2) the method of selecting inputs using principal component analysis and a contour map can eliminate the redundancy of hyperspectral data while retaining the physical meaning of the inputs. For the model with the highest prediction accuracy, the inputs were all derived from the wavelength range of SOC variations; 3) the differences in prediction accuracy among the different prediction models are small; and 4) the SOC prediction accuracy using hyperspectral satellite data is greatly improved compared with that of previous SOC prediction studies using multispectral satellite data. This study provides a highly robust and accurate method for predicting and mapping regional SOC contents.  相似文献   

基于点云数据的不规则文物三维重建——以经幢为例     

喜文飞  李灵索  杨勇  李国柱  李春梅  李金平 《测绘通报》2020,(12):87-89

海量点云数据可以较好地构建文物的三维建模，针对文物复杂的表面结构，传统的算法很难达到精细建模，为了解决复杂模型表面的空间三角网构网问题，本文结合空间三角形的法向量构建三角网，以空间三角网表面的曲率为约束条件，构建物体表面的空间三角网，然后对构建的空间三角网进行精细建模。以昆明市文物——经幢为例进行三维重建试验，结果表明，新方法适合室内文物的三维建模，可以达到较好的效果。  相似文献   

BDS卫星钟差半参数平差模型异常数据探测与处理     

李文涛  颜雄  夏磊  任青阳  陈洁  潘雄 《测绘学报》2020,49(1):55-64

针对北斗卫星钟差数据中出现钟跳、粗差等异常数据频次较高的问题,将半参数平差模型引入BDS的钟差数据的处理过程中。首先,在考虑系统误差的同时,改进了常用的钟差模型;其次,综合考虑异常数据和系统误差,利用补偿最小二乘原理和极值求解方法,详细推导了分离异常数据前后参数和非参数估计值与相应观测值改正数的关系表达式,实现了异常数据的定值、参数求解和系统误差分离。在此基础上,引入Cook距离,给出了利用参数分量和非参数分量的Cook距离及混合Cook距离,去判断异常值的位置,并给出了一些参数的选取方法及相应的处理措施,实现了卫星钟差异常数据的定位和定值以及部分系统误差的分离。最后,采用武汉大学GNSS中心提供的采样间隔为5 min的北斗卫星精密钟差数据,将本文方法与常用方法进行了试验对比。试验结果表明,本文方法能够有效地识别并处理卫星钟差数据中的异常值,有效克服了基于经验阈值钟差异常数据探测方法的不足,且该方法对于量级较小的异常钟差数据也有很好的探测效果,一定程度丰富了现有的BDS钟差数据质量控制方法。  相似文献