2018年9月8日墨江地震及周边地区构造应力场特征分析   总被引：1，自引：0，他引：1       下载免费PDF全文

李泽潇  万永革  崔华伟  李振月  胡晓辉  黄骥超  靳志同 《地球物理学报》2020,63(4):1431-1443

2018年9月8日,云南省墨江县发生MS5.9地震并伴随一系列余震,探究该地震周围的应力场对于理解该地震的发生机制和后续地震的发展趋势具有着重要的参考意义.本研究收集了震源及其邻区中前人研究和Global CMT所给出的震源机制资料,对该地区进行了构造应力场反演,并同时利用反演得到的应力张量模拟墨江地区的震源机制解表现.结果表明:(1)在应力轴整体分布上,自西向东σ1轴(压轴)从NNE-SSW向逐渐转向NNW-SSE向,σ3轴(张轴)从WWN-EES向逐渐转向WWS-EEN向,张轴呈弧形分布,压轴呈放射状分布.(2)在应力轴倾伏角上,研究区域内的压应力轴和张应力轴倾伏角都比较小,即两轴均接近水平.(3)R值分布大体是在东南部相较于西北部大,结合当地地质背景分析得到,物质逃逸自西北向东南呈逐渐变缓的趋势.(4)利用反演得到的应力张量和应力状态计算墨江地震震源区的相对剪应力和相对正应力大小.由此推测,墨江地震恰好发生在相对剪切应力值和相对正应力正值最大的节面上.从而可以确定墨江地震的发震节面的基本参数:走向216.32°,倾角86.91°,滑动角0.27°,相对剪应力值0.9,相对正应力值0.3.本研究为此次墨江地震的发震背景和地震动力学研究提供了基础性资料.  相似文献   

Simultaneous water and vapour transfer in an unsaturated mudstone in badlands terrain,southwestern Taiwan     

Kohei Higuchi  Masahiro Chigira  Der-Her Lee  Jian-Hong Wu 《地球表面变化过程与地形》2020,45(13):3323-3335

The simultaneous transfer of pore fluid and vapour was studied in the unsaturated shallow subsurface of a Plio-Pleistocene marine mudstone badland slope in southwestern Taiwan during the dry season using field monitoring data and numerical simulations. Data from field monitoring show mass-basis water contents of ~0.05 to ~0.10 that decrease towards the unsaturated ground surface and were invariant during the middle part of the dry season, except for daily fluctuations. In addition, the observed daily fluctuations in water content correlate with fluctuations in bedrock temperature, especially at depths of 2.5–5.0 cm. Periodic increases in water content occurred most notably during the day, when the bedrock temperature showed the greatest increase. Water contents then decreased to the previous state as bedrock temperature decreased during the night. Calculated vapour fluxes within the mudstone during the day increased up to 6 × 10⁻⁶–1 × 10⁻⁵ kg m⁻² s⁻¹, deriving a 0.01–0.02 increase in mass-basis water content at 2.5 cm depth for a 12-h period. This agrees with field monitoring data, suggesting that increases in water content occurred due to vapour intrusions into the bedrock. Pore water electrical conductivity (EC) showed periodic variations due to vapour intrusion, and gradually increased between the ground surface and depths of 2.5–5.0 cm. In contrast, pore water EC gradually decreased between 15 and 40 cm depth. Calculated water fluxes at depths of 2.5–40.0 cm varied from −4 × 10⁻⁶ to −2 × 10⁻⁹ kg m⁻² s⁻¹. These fluxes generated an increase in solute concentrations at the ground surface, with negative values of water flux indicating an upwards movement of water towards the surface. We show that the increase in solute content due to solute transfer from depth is highly dependent on variations in water flux with depth. © 2020 John Wiley & Sons, Ltd.  相似文献   

结合变差纹理特征的极化SAR建筑物震害信息提取          下载免费PDF全文

肖修来  翟玮  郭晓  张皓然 《地震工程学报》2020,42(2):568-578

快速评估建筑物地震灾害信息对地震应急救援工作有着指导意义,而极化SAR具有全天候、全天时的特点,因此利用极化SAR图像提取震害信息已逐渐成为研究热点。虽然极化SAR具有丰富的极化信息,但其纹理信息不可忽略,尤其是完好的人工建筑物在图像上呈现规则的纹理特征,而倒塌建筑区域纹理分布杂乱,因此结合纹理信息也可以很好地提取建筑物信息。以2010年玉树地区的全极化SAR数据为研究对象,首先,利用Yamaguchi分解的体散射分量PV提取了SAR图像中的建筑物区域以及道路、水系等非建筑物信息,在此基础上,对相干散射矩阵T11分量中倒塌建筑物、完好建筑区域进行变差计算,根据变差曲线确定变程a后,再对建筑物区域采取窗口m*m(m=3*a)进行变差计算得到变差纹理信息,最后利用FCM算法对变差纹理信息分别提取完好建筑物和倒塌建筑物区域,为了对比分析,文章利用Yamaguchi分解的二次散射分量PD提取完好建筑物区域,与震后光学遥感图像对应样本点进行人工验证,得到完好建筑物的提取精度为80.18%,倒塌建筑物的提取精度为84.54%,道路水系的提取精度为77.58%。  相似文献   

锚固站对BDS自主导航精度的影响分析     

龚晓颖  蔡诗响 《测绘通报》2020,(4):68-75

介绍了自主导航的轨道确定及时间同步观测方程。以北斗仿真全星座为对象，通过采用仿真星间及卫星与地面锚固站间观测值，进行了60 d自主导航解算，分别探讨了锚固站数量及锚固站观测连续性对北斗卫星导航系统（BDS）3类卫星自主导航精度的影响。结果表明：锚固站数量及观测连续性对RERR及CERR无影响；加入1个锚固站即可显著改进URE结果精度，继续增加锚固站数量虽然可进一步提高URE精度但其改进效果有限；锚固站观测中断时间越长，其对应自主导航精度越低。因此，在BDS自主导航运行模式下应保持较高的锚固站观测频次以保证自主导航精度；另外，锚固站数量及观测连续性对北斗系统3类卫星自主导航精度的影响无显著差异。  相似文献   

基于时相变化的晴空条件下Himawari-8 AHI火点检测     

鄢俊洁  瞿建华  冉茂农  张芳芳 《遥感学报》2020,24(5):571-577

Himawari-8静止气象卫星具有高空间分辨率、高观测频次和高时效特点,对于火点检测具有很强优势。对Himawari-8卫星的3.9μm和11.2μm两通道亮温进行了连续时相变化研究,得出两通道的亮温在时间上的变化差值稳定且规律明显。根据两通道的亮温时相特征,考虑白天可见光对3.9μm通道的影响,并结合火点产生时引起的亮温变化特征,提出了适用于晴空条件下改进的火点检测算法。在多处进行了此算法的实验,例如2018-11-27 T 16:40(UTC时)河北张家口市桥东区一化工厂附近发生的严重爆炸起火事件以及2019-02-28澳大利亚西南部发生的火灾事件,均快速有效的检测到了火点。实验表明,改进的火点检测算法能很好的进行火点检测,并能解决晨昏交界、冰雪下垫面、常规火源点、太阳耀光等火点检测的难题。  相似文献   

微型全极化SAR海洋监测应用技术研究     

王军锋  乔明  刘子畅  吕大勇 《测绘与空间地理信息》2020,(2):88-90

我国作为海洋大国,近年来海洋事业进入快速发展时期,合成孔径雷达以其自身的技术特点在海洋遥感监测中发挥了重要的作用。在以往的海洋监测中大多采用星载合成孔径雷达获取海洋数据,但因星载SAR受到卫星搭载平台和运行轨道等因素影响,对局部地区高时效的数据获取还存在一定的制约因素。本文通过对无人机机载微型全极化合成孔径雷达对海岸带、海岛礁、海洋动目标高分辨率成像和应用分析研究,为无人机机载SAR在海洋监测中的应用提供了全新的技术手段。  相似文献   

景电灌区移民对祁连山植被恢复的相对生态价值          下载免费PDF全文

赵建林  康德奎  彭维恩  王建礼  史中兴  陈天顺  董志洋  汪杰  常兆丰 《干旱区地理》2020,43(1):182-189

近些年来，生态系统的服务价值研究已成为生态学以及生态经济学领域中的一个热点问题。祁连山被称为伸进西北干旱区的一座湿岛，在我国“一带一路”建设中占有重要地位。景电灌区兴建以来从祁连山移出了大量农牧民。那么，景电灌区移民对祁连山植被恢复的生态价值如何呢？以景电灌区移民涉及到的祁连山东端景泰、古浪、天祝3县山区为研究区，用价值工程方法对从祁连山区向景电灌区移民退耕退牧还林还草的生态价值做了分析，并与模型因子当量法的计算结果进行了比较。结果表明：祁连山向景电灌区移民退耕退牧还林还草总的生态价值为37.458 1×10⁸元。其中，退耕还林还草的生态价值为37.438 6×0⁸元，退牧后草场植被盖度增加的生态价值为194.79×104元。计算结果为用COSTANZA和谢高地模型因子当量法计算得的祁连山向景电灌区移民退耕退牧还林还草总的生态服务价值40.054 0×0⁸元的93.52%。两种方法计算结果祁连山向景电灌区移民退耕退牧还林还草总的生态价值为景电工程年总成本1.45×0⁸元的25.8~27.6倍。两种计算结果一致表明，景电灌区生态移民对祁连山植被恢复的生态价值十分突出。由此也可以看出，COSTANZA和谢高地模型因子当量法适用于祁连山的生态服务价值分析。  相似文献   

A machine learning approach for predicting computational intensity and domain decomposition in parallel geoprocessing     

Peng Yue  Fan Gao  Boyi Shangguan  Zheren Yan 《International journal of geographical information science》2020,34(11):2243-2274

ABSTRACT

High performance computing is required for fast geoprocessing of geospatial big data. Using spatial domains to represent computational intensity (CIT) and domain decomposition for parallelism are prominent strategies when designing parallel geoprocessing applications. Traditional domain decomposition is limited in evaluating the computational intensity, which often results in load imbalance and poor parallel performance. From the data science perspective, machine learning from Artificial Intelligence (AI) shows promise for better CIT evaluation. This paper proposes a machine learning approach for predicting computational intensity, followed by an optimized domain decomposition, which divides the spatial domain into balanced subdivisions based on the predicted CIT to achieve better parallel performance. The approach provides a reference framework on how various machine learning methods including feature selection and model training can be used in predicting computational intensity and optimizing parallel geoprocessing against different cases. Some comparative experiments between the approach and traditional methods were performed using the two cases, DEM generation from point clouds and spatial intersection on vector data. The results not only demonstrate the advantage of the approach, but also provide hints on how traditional GIS computation can be improved by the AI machine learning.  相似文献   

Low‐P and high‐T metamorphism of basalts: Insights from the Sudbury impact melt sheet aureole and thermodynamic modelling     

Taus R. C. Jrgensen  Douglas K. Tinkham  C. Michael Lesher 《Journal of Metamorphic Geology》2019,37(2):271-313

Low‐pressure and high‐temperature (LP–HT) metamorphism of basaltic rocks, which occurs globally and throughout geological time, is rarely constrained by forward phase equilibrium modelling, yet such calculations provide valuable supplementary thermometric information and constraints on anatexis that are not possible to obtain from conventional thermometry. Metabasalts along the southern margin of the Sudbury Igneous Complex (SIC) record evidence of high‐grade contact metamorphism involving partial melting and melt segregation. Peak metamorphic temperatures reached at least ~925°C at ~1–3 kbar near the SIC contact. Preservation of the peak mineral assemblage indicates that most of the generated melt escaped from these rocks leaving a residuum characterized by a plagioclase–orthopyroxene–clinopyroxene–ilmenite‐magnetite±melt assemblage. Peak temperatures reached ~875°C up to 500 m from the SIC lower contact, which marks the transition to metabasalts that only experienced incipient partial melting without melt loss. Metabasalts ~500 to 750 m from the SIC contact are characterized by a similar two‐pyroxene mineral assemblage, but typically contain abundant hornblende that overgrew clino‐ and orthopyroxene along an isobaric cooling path. Metabasalts ~750 to 1,000 m from the SIC contact are characterized by a hornblende–plagioclase–quartz–ilmenite assemblage indicating temperatures up to ~680°C. Mass balance and phase equilibria calculations indicate that anatexis resulted in 10–20% melt generation in the inner ~500 m of the aureole, with even higher degrees of melting towards the contact. Comparison of multiple models, experiments, and natural samples indicates that modelling in the Na₂O–CaO–FeO–MgO–Al₂O₃–SiO₂–H₂O–TiO₂–O₂ (NCFMASHTO) system results in the most reliable predictions for the temperature of the solidus. Incorporation of K₂O in the most recent amphibole solution model now successfully predicts dehydration melting by the coexistence of high‐Ca amphibole and silicate melt at relatively low pressures (~1.5 kbar). However, inclusion of K₂O as a system component results in prediction of the solidus at too low a temperature. Although there are discrepancies between modelling predictions and experimental results, this study demonstrates that the pseudosection approach to mafic rocks is an invaluable tool to constrain metamorphic processes at LP–HT conditions.  相似文献   

利用GLAS激光测高数据评估DSM产品质量及精度优化   总被引：2，自引：0，他引：2  

胡柳茹  唐新明  李国元  付冬暇  窦显辉  赵世湖 《测绘通报》2019,(11):39-43

提出了一种利用卫星激光测高数据直接优化提升数字表面模型（DSM）产品精度的方法。选取境外中亚地区的资源三号DSM开展试验，通过采用多准则约束方法提取激光高程控制点，分别利用偏度、中值、线性、二次多项式等进行DSM误差修正，发现4种模型均能有效消除DSM系统误差，其中基于二次多项式的方法更适用于平地和丘陵地貌，线性模型更适用于高山地貌。试验验证了采用卫星激光测高数据优化境外DSM技术流程的可行性，最终可提高DSM的绝对高程精度。  相似文献