利用海洋重力场变化分析洋底板块运动          下载免费PDF全文

李倩倩  鲍李峰  C. K. Shum 《地球物理学报》2020,63(7):2506-2515

洋底板块运动是地球动力学和全球变化研究的重要内容.本文根据质量迁移与地球外部重力场变化的对应关系,利用不同时期测高资料推算的1995—2019全球海洋重力场变化结果,反演分析全球洋底板块运动特征.研究表明,板块汇聚边界、板块内无震海岭、海山群、断裂带等区域重力异常变化显著,而在板块离散边界无明显变化趋势;西南印度洋中脊、大西洋中脊、中印度洋中脊等地区重力异常垂直梯度变化显著,且在西太平洋俯冲带、部分海岭区域也存在明显变化,其空间分布与地形基本吻合.海洋重力场变化整体上准确反映了全球洋底板块构造运动.相较于重力异常变化反演结果,重力垂直梯度的变化能够更为准确地反映洋底板块运动特征,特别是在洋中脊区域,扩张速率越小,垂直重力梯度变化越显著.此外,详细讨论了测高海洋重力场不确定因素对洋底板块运动分析结果的影响,海面坡度改正是主要因素之一.  相似文献   

融合多源数据的三维建模方法及精度分析     

祖立辉 《北京测绘》2020,(3):347-351

以地面相机影像、低空无人机影像和地面三维激光点云数据为融合对象,研究空地影像融合、低空影像融合地面三维激光点云和低空影像融合三维白模进行三维建模的方法,并对其三维建模精度和建模效果进行综合分析。这3种融合方法进行三维建模丰富了三维模型的色彩纹理信息,提高了三维模型的几何结构精度,能满足较大场景的三维实景模型的建模要求,为数字化古建筑(古文物)保护提供具有较高价值的参考数据。  相似文献   

Jason-2高度计电离层GIM误差分析及修正研究     

黄霞凤  苗洪利  苗翔鹰  薛文文 《海洋学报》2019,41(7):143-148

基于Jason-2高度计2015年地球物理数据集(GDR)38个周期太平洋海域的全球电离层图(GIM)电离层校正值和双频校正值的数据，分不同季度和不同纬度区域比较二者的差异，结果表明:GIM值与双频校正值之间存在明显的差异，GIM校正值普遍高于双频校正值，说明GIM高估了电离层路径延迟，GIM校正值与双频校正值的差异与季节和纬度区间有关。用梯度下降法得到GIM值的修正方程，将修正方程应用于2016年Jason-2的全年数据，修正后的GIM值与双频校正值十分接近，在各年份中均具有良好的适用性。在单频高度计不能使用电离层双频校正算法的情况下，可以利用不同季度和不同纬度区域的修正方程对同等高度的高度计GIM值进行修正以达到双频校正值的精度水平。  相似文献   

利用GLAS激光测高数据评估DSM产品质量及精度优化   总被引：2，自引：0，他引：2  

胡柳茹  唐新明  李国元  付冬暇  窦显辉  赵世湖 《测绘通报》2019,(11):39-43

提出了一种利用卫星激光测高数据直接优化提升数字表面模型（DSM）产品精度的方法。选取境外中亚地区的资源三号DSM开展试验，通过采用多准则约束方法提取激光高程控制点，分别利用偏度、中值、线性、二次多项式等进行DSM误差修正，发现4种模型均能有效消除DSM系统误差，其中基于二次多项式的方法更适用于平地和丘陵地貌，线性模型更适用于高山地貌。试验验证了采用卫星激光测高数据优化境外DSM技术流程的可行性，最终可提高DSM的绝对高程精度。  相似文献   

四川米易海塔地区混合岩型铀矿流体包裹体特征     

郭锐  陈友良  刘凯鹏  郑玉文  胡漾 《矿物学报》2020,40(2):137-148

混合岩型铀矿是康滇地轴上最有希望取得找矿突破的铀矿类型,海塔地区的铀矿化即是该类型铀矿的典型代表。本文针对区内的长英质脉矿石、富晶质铀矿石英脉矿石和含矿热液石英脉中的石英流体包裹体进行了研究。结果表明,海塔地区混合岩型铀矿的成矿作用可分为2个阶段:早期混合岩化热液成矿阶段为高温、中低盐度流体,流体包裹体均一温度集中在380~540℃,盐度变化范围为16.15%~23.18%NaCl eqv,是区内铀成矿的主要阶段;晚期热液叠加改造成矿阶段为中低温、低盐度流体,流体包裹体均一温度集中在140~220℃,盐度变化范围为5.56%~23.18%NaCleqv,是区内富铀矿的形成阶段。流体包裹体的气相成分测试表明,长英质脉矿石石英包裹体中以CH4、CO2为主,其次为H2O和N2;而富晶质铀矿石英脉及含矿热液石英脉石英包裹体中以H2为主,部分含有CO2、CH4、H2O。氢、氧同位素研究表明,早期混合岩化成矿阶段的成矿流体可能为岩浆水与变质水的混合,而晚期热液叠加改造成矿阶段成矿流体中可能有大气降水的加入。  相似文献   

基于三维激光扫描技术的钢结构扰度检测及应用     

宋云记  王晓民  王智 《测绘通报》2020,(12):160-163

钢结构在长期荷载及不均匀受力的作用下会产生空间变形，其中扰度是其重要的衡量指标。通常采用全站仪采集钢结构轴线上若干特征点进行分析、计算，由于钢结构特征点难以捕捉，测量存在误差，并且有限的空间离散点难以全面反应钢结构空间变形。本文采用徕卡RTC360三维激光扫描进行钢结构扰度测量；介绍了其作业流程及数据处理方法；利用标靶将各个测站的三维点云拼接成一个整体；采用拟合的方法提取空间特征点及轴线；利用三维点云构建空间模型，并与设计模型进行碰撞分析；可全面地反映钢结构的空间变形情况。  相似文献   

Talus slope geomorphology investigated at multiple time scales from high-resolution topographic surveys and historical aerial photographs (Sanetsch Pass,Switzerland)     

Hanne Hendrickx  Lars De Sloover  Cornelis Stal  Reynald Delaloye  Jan Nyssen  Amaury Frankl 《地球表面变化过程与地形》2020,45(14):3653-3669

Talus slopes are common places for debris storage in high-mountain environments and form an important step in the alpine sediment cascade. To understand slope instabilities and sediment transfers, detailed investigations of talus slope geomorphology are needed. Therefore, this study presents a detailed analysis of a talus slope on Col du Sanetsch (Swiss Alps), which is investigated at multiple time scales using high-resolution topographic (HRT) surveys and historical aerial photographs. HRT surveys were collected during three consecutive summers (2017–2019), using uncrewed aerial vehicle (UAV) and terrestrial laser scanning (TLS) measurements. To date, very few studies exist that use HRT methods on talus slopes, especially to the extent of our study area (2 km²). Data acquisition from ground control and in situ field observations is challenging on a talus slope due to the steep terrain (30–37°) and high surface roughness. This results in a poor spatial distribution of ground control points (GCPs), causing unwanted deformation of up to 2 m in the gathered UAV-derived HRT data. The co-alignment of UAV imagery from different survey dates improved this deformation significantly, as validated by the TLS data. Sediment transfer is dominated by small-scale but widespread snow push processes. Pre-existing debris flow channels are prone to erosion and redeposition of material within the channel. A debris flow event of high magnitude occurred in the summer of 2019, as a result of several convective thunderstorms. While low-magnitude (<5,000 m³) debris flow events are frequent throughout the historical record with a return period of 10–20 years, this 2019 event exceeded all historical debris flow events since 1946 in both extent and volume. Future climate predictions show an increase of such intense precipitation events in the region, potentially altering the frequency of debris flows in the study area and changing the dominant geomorphic process which are active on such talus slopes. © 2020 John Wiley & Sons, Ltd.  相似文献   

Inter-comparison of remote sensing platforms for height estimation of mango and avocado tree crowns     

《International Journal of Applied Earth Observation and Geoinformation》2020

To support the adoption of precision agricultural practices in horticultural tree crops, prior research has investigated the relationship between crop vigour (height, canopy density, health) as measured by remote sensing technologies, to fruit quality, yield and pruning requirements. However, few studies have compared the accuracy of different remote sensing technologies for the estimation of tree height. In this study, we evaluated the accuracy, flexibility, aerial coverage and limitations of five techniques to measure the height of two types of horticultural tree crops, mango and avocado trees. Canopy height estimates from Terrestrial Laser Scanning (TLS) were used as a reference dataset against height estimates from Airborne Laser Scanning (ALS) data, WorldView-3 (WV-3) stereo imagery, Unmanned Aerial Vehicle (UAV) based RGB and multi-spectral imagery, and field measurements. Overall, imagery obtained from the UAV platform were found to provide tree height measurement comparable to that from the TLS (R² = 0.89, RMSE = 0.19 m and rRMSE = 5.37 % for mango trees; R² = 0.81, RMSE = 0.42 m and rRMSE = 4.75 % for avocado trees), although coverage area is limited to 1–10 km² due to battery life and line-of-sight flight regulations. The ALS data also achieved reasonable accuracy for both mango and avocado trees (R² = 0.67, RMSE = 0.24 m and rRMSE = 7.39 % for mango trees; R² = 0.63, RMSE = 0.43 m and rRMSE = 5.04 % for avocado trees), providing both optimal point density and flight altitude, and therefore offers an effective platform for large areas (10 km²–100 km²). However, cost and availability of ALS data is a consideration. WV-3 stereo imagery produced the lowest accuracies for both tree crops (R² = 0.50, RMSE = 0.84 m and rRMSE = 32.64 % for mango trees; R² = 0.45, RMSE = 0.74 m and rRMSE = 8.51 % for avocado trees) when compared to other remote sensing platforms, but may still present a viable option due to cost and commercial availability when large area coverage is required. This research provides industries and growers with valuable information on how to select the most appropriate approach and the optimal parameters for each remote sensing platform to assess canopy height for mango and avocado trees.  相似文献   

激光跟踪仪在核电站主管道安装中的应用     

郭建兵 《北京测绘》2020,(1):123-125

目前,核电站的主管道焊接越来越多的采用了自动焊技术,这有利于提高焊接质量效率,还可以压缩建设成本。然而,主管道自动焊对焊缝的限差较现有工艺要求更高,高精度的测量是实现主管道自动焊的必要条件之一。本文针对主管道自动焊管口组队高精度的技术要求,提出采用激光跟踪仪对主管道自动焊相关的设备进行更为精密的三维工业测量,通过理论技术评定测量精度,然后选择测量仪器和编制具体的测量方案,最终保证了主管道自动焊精确组对的实现。  相似文献   

一种由粗到精的地面激光点云多层级配准方法     

王英  张云生 《测绘与空间地理信息》2020,(2):156-159

提出了一种综合利用快速点特征直方图(FPFH)描述符和同名点引导ICP优化的地面激光扫描(TLS)点云配准方法。该方法包括3个步骤:1)点云金字塔构建;2)基于FPFH的粗配准;3)同名点引导的ICP精配准。首先使用体素网格滤波器构造点云的金字塔结构,在粗配准时,FPFH描述符用于金字塔顶层上点云的鲁棒匹配,在此基础上,再进行两层级同名点引导的ICP精配准优化,使用3组典型TLS点云对进行实验,结果表明本文方法可以高效地完成TLS点云的配准。  相似文献