考虑填充墙影响的钢筋混凝土厂房结构地震易损性分析     

梁志强  徐超  温增平 《震灾防御技术》2019,14(4):707-718

采用对角斜撑模拟纵向填充墙的作用，建立考虑填充墙和不考虑填充墙厂房结构模型，采用拉丁超立方抽样技术建立考虑材料不确定性的结构分析样本，基于随机Pushover分析确定结构不同破坏状态下的统计参数。综合考虑结构材料强度及输入地震动不确定性的影响，通过非线性时程分析开展单层钢筋混凝土厂房结构易损性研究，在此基础上比较结构横、纵向易损性的差异，研究填充墙对结构易损性的影响。研究结果表明:钢筋混凝土厂房结构体系横向地震易损性显著大于纵向地震易损性；对纵向结构体系而言，加入填充墙会明显降低结构易损性，但在相同强度的地震动作用下，填充墙破坏程度比主体结构严重，这与厂房结构的实际震害特征相符。  相似文献   

桥梁沉井基础抗震性能研究现状及展望          下载免费PDF全文

王义  陈兴冲  张熙胤  张永亮  刘正楠 《世界地震工程》2020,(1):044-55

随着国内外大跨桥梁特别是跨海桥梁建设的迅速发展，沉井基础在桥梁基础中所占的比例越来越大。虽然沉井基础作为1种刚性基础具有良好的力学性能，然而震害实践表明沉井基础在地震作用下也并非万无一失。通过分析国内外典型桥梁沉井基础的震害特征发现，沉井基础的地震破坏与桩基础有显著差异，且与埋置深度有直接关系；研究表明:地震作用下沉井基础的破坏机理及地基承载力与静力作用下明显不同，但目前在该方面的研究还较为欠缺；总结和对比了现有几种沉井基础-土相互作用研究方法，并分析了几种研究方法的优缺点和适用场合；同时也归纳和对比了各国抗震规范对桥梁沉井基础的基本规定、适用范围、计算方法和构造规定等方面的内容。最后结合现有的研究现状对沉井基础抗震性能研究的发展方向进行了展望，此外，随着我国跨海、跨江及跨库区大跨桥梁建设的发展，地震力和波浪力等多灾害因素共同作用下深水沉井基础桥梁破坏机理及设计方法的研究势在必行。  相似文献   

Crack nucleation in saturated porous media     

Luc Dormieux  Eric Lemarchand  Thomas Carlioz  Laurent Jeannin 《国际地质力学数值与分析法杂志》2020,44(5):553-574

Crack nucleation has been the subject of important contributions in the last two last decades. However, it seems that few attention has been granted to the case of saturated porous media. This is the question addressed in the present paper which is devoted to nucleation in traction mode. From a physical point of view, nucleation is a sudden phenomenon, so that the material response is both adiabatic and undrained. In the spirit of the variational approach, the nucleated crack is viewed as the final state of a region of space in which the material undergoes a full damage process. In traction mode, the opening of a saturated crack in undrained condition induces a drop of fluid pressure. In case of low fluid compressibility, the presence of the fluid delays the brittle failure usually associated with nucleation, as long as the fluid pressure remains above the saturation vapor pressure. Nucleation is therefore possible only if a partial vaporization of the fluid takes place.  相似文献   

Three-dimensional finite element simulation of fracture propagation in rock specimens with pre-existing fissure(s) under compression and their strength analysis     

Ramin Pakzad  Shanyong Wang  Scott W. Sloan 《国际地质力学数值与分析法杂志》2020,44(10):1472-1494

A FORTRAN program, consistent with the commercially available finite element (FE) code ABAQUS, is developed based on a three-dimensional (3D) linear elastic brittle damage constitutive model with two damage criteria. To consider the heterogeneity of rock, the developed FORTRAN program is used to set the stiffness and strength properties of each element of the FE model following a Weibull distribution function. The reliability of the program is assessed against available experimental results for granite cylindrical specimens with a throughgoing, flat and inclined fissure. The calibration procedure of the material parameters is explained in detail, and it is shown that the compressive to tensile strength ratio can have a substantial influence on the failure response of the specimens. Numerical simulations are conducted for models with different levels of heterogeneity. The results show a smaller load bearing capacity for models with less homogeneity, representing gradual coalescence of fully damaged elements forming throughout the models during loading. The maximum load bearing capacity is studied for various combinations of inclination angles of two centrally aligned, throughgoing and flat fissures of equal length embedded in cylindrical models under uniaxial and multiaxial loading conditions. The key role of the compressive to tensile strength ratio is highlighted by repeating certain simulations with a lower compressive to tensile strength ratio. It is proven that the peak loads of the rock models with sufficiently small compressive to tensile strength ratios containing two throughgoing fissures of equal length are similar, provided that the minimum inclination angles of the models are the same. The results are presented and discussed with respect to the existing experimental findings in the literature, suggesting that the numerical model applied in this study can provide useful insight into the failure behaviour of rock-like materials.  相似文献   

张家口蔚县农村房屋抗震性能调查及统计分析     

马旭东  牛露  刘晓丹  刘龙  茅远哲  关恒瑜  刘贾贾  刘志辉 《震灾防御技术》2019,14(4):829-837

为进一步了解蔚县地区农村房屋的抗震性能，在该地区选取43个村庄、7732栋房屋进行实地调查和统计分析。主要调查房屋结构、建筑材料、房屋抗震构造措施等内容，分析各结构类型房屋抗震薄弱环节及房屋抗震性能，并统计分析经济、交通、地形等因素与房屋结构类型及抗震性能的关系，提出提高该地区农村房屋抗震性能的建议。  相似文献   

Ⅶ度抗震设防下牧区居住建筑节能技术研究   总被引：1，自引：1，他引：0       下载免费PDF全文

薛芸 《地震工程学报》2018,40(1):60-65

对抗震设防下的牧区居民建筑进行节能设计,在提高能源利用率及降低能源消耗方面具有重要意义。传统的建筑节能技术主要通过降低建筑的热能消耗来提高能源利用,存在节能效果差且单一的问题。对此,在Ⅶ度抗震设防下,采用ANSYS软件,引入Block Lanczos法对牧区居住建筑结构的模态进行分析,计算出建筑地震作用,并通过分析牧区居住建筑围护结构及门窗材质来优化建筑节能技术。实验结果表明,在内蒙古牧区居住建筑采用改进提出的建筑节能技术,可有效降低能源消耗,从而能够有效利用能源,使其具有一定的优势。  相似文献   

Characteristics and Analysis of the Seismic Damage from the M_S7.0 Jiuzhaigou Earthquake in the Area between Songpan and Jiuzhaigou     

Yan Zhaolun  Peng Xiaobo  Li Shuguang  Hong Haichun 《中国地震研究》2018,32(2):173-188

This paper expounds the features of the buildings and analyzes the seismic disaster characteristics of the Jiuzhaigou M_S7. 0 earthquake in the area between Songpan and Jiuzhaigou. New buildings (especially the frame structure) had good anti-seismic performance,but brick-wood structures and brick-concrete structures sustained large amounts of damage in the earthquake. By computing the seismic damage index,we found that the seismic damage index of the frame structure was far less than that of civil structures and brick-wood structures. The seismic damage index of frame structures were all zero in the Ⅵ area,and increased rapidly with the increase of intensity,but the increasing range was reduced. We also discussed how to evaluate the intensity in areas where there was a lack of buildings or there was only one structure type,which can be referenced in future field work.  相似文献   

窑洞外形特征对结构抗震性能影响研究          下载免费PDF全文

王飞剑  刘如山  马朝晖 《地震工程学报》2018,40(5):910-918

调查发现山西北部农村地区农居窑洞多是独立式土坯窑洞,结构主要受力体系是土坯砌体砌筑拱结构,其建造无统一标准,外形样式存在差异。由于拱结构的内力分布对外形尺寸变化比较敏感,为研究窑洞外形特征对结构抗震性能影响,建立相应的有限元模型进行计算分析,对比不同外形特征窑洞在地震作用下的损伤情况,并结合历史震害,指出窑洞结构的薄弱位置。研究结果表明覆土较厚的窑洞容易损伤,连拱孔数较多窑洞的两侧位置更容易发生破坏,拱的曲线形状对结构抗震性能有一定影响,合理拱曲线窑洞的抗震性能优于一般形状窑洞。  相似文献   

建筑用玻化微珠保温混凝土剪力墙抗震结构设计          下载免费PDF全文

朱保华  韩丽婷 《地震工程学报》2018,40(5):963-968

传统方法主要通过导热系数低的材料和增加墙体厚度来达到抗震效果。该方法不仅浪费能源而且抗震性能较差,因此对建筑用玻化微珠保温混凝土剪力墙抗震结构进行设计,构建玻化微珠保温混凝土本构模型,获得与抗震结构相关的理论数据。根据所获取的数据,选择板壳单元SHELL63作为玻化微珠保温混凝土剪力墙抗震结构单元。依据抗震结构材料参数以及抗震结构单元,采用ANSYS软件模拟构建玻化微珠保温混凝土剪力墙抗震结构。分析实验结果可知,所设计建筑节能抗震结构的抗震性能较好,实际运用价值高。  相似文献   

Implementation of a coupled plastic damage distinct lattice spring model for dynamic crack propagation in geomaterials          下载免费PDF全文

Chao Jiang  Gao‐Feng Zhao 《国际地质力学数值与分析法杂志》2018,42(4):674-693

This paper studies dynamic crack propagation by employing the distinct lattice spring model (DLSM) and 3‐dimensional (3D) printing technique. A damage‐plasticity model was developed and implemented in a 2D DLSM. Applicability of the damage‐plasticity DLSM was verified against analytical elastic solutions and experimental results for crack propagation. As a physical analogy, dynamic fracturing tests were conducted on 3D printed specimens using the split Hopkinson pressure bar. The dynamic stress intensity factors were recorded, and crack paths were captured by a high‐speed camera. A parametric study was conducted to find the influences of the parameters on cracking behaviors, including initial and peak fracture toughness, crack speed, and crack patterns. Finally, selection of parameters for the damage‐plasticity model was determined through the comparison of numerical predictions and the experimentally observed cracking features.  相似文献