How soil texture,channel shape and cross-sectional area affect moisture dynamics and water loss in irrigation channels     

Zhifan Mu  Tianxiao Li  Dong Liu  Qiang Fu  Renjie Hou  Qinglin Li  Yi Ji  Song Cui  Mo Li 《水文研究》2021,35(4):e14155

To enhance the utilization efficiency of farmland irrigation water and reduce the leakage of water conveyance channels, the leakage process of channels was simulated dynamically. The simulated results were compared with data measured in laboratory experiments, and the performance of the model was evaluated. The results indicated that the simulated values of the model were consistent with the observation values, and the R² values varied between 0.91 and 0.99. In addition, based on the laboratory experiments, a water supply system (Mariotte bottles) and soil box were built using plexiglass. Three influencing factors, namely, the channel form, soil texture and channel cross-sectional area, were varied to observe and calculate the resulting cumulative infiltration amount, infiltration rate and wetting front migration distance. HYDRUS-3D software was used to solve the three-dimensional soil water movement equation under different initial conditions. The results demonstrated that the U-shaped channel was more effective than the trapezoidal channel in increasing the utilization efficiency of the water resources. A U-shaped channel with a small channel cross-sectional area should be adopted and the soil particle size should be prioritized in the construction of water conveyance channels for farmlands. The simulation results were in agreement with the observed results, which indicates that HYDRUS-3D is a reliable tool that can accurately simulate the soil moisture movement in water conveyance channels. The research results can provide a reference for the design and operation of farmland irrigation systems.  相似文献   

基于分区间泛化Kriging近似模型的船舶局部结构形状优化     

张干锋  王德禹 《海洋工程》2018,36(6):46-57

为提高Kriging近似模型在船舶结构性能多维度响应预测方面的适用性,对常规Kriging近似模型进行分区间泛化改进:一是对设计样本点的各个维度(分量)进行划区,并在每一个分区间内采用最优拉丁超立方(OLhd)取样;二是引入比例系数w1组合高斯与指数型相关函数提高模型对数据的泛化能力,从而在每个划分的区间内建立泛化的Kriging近似模型。通过SCH测试函数,验证了构造的分区间泛化Kriging模型有效性。结合参数化建模和改进Kriging近似模型对某过渡肘板和舱口角隅边界进行形状优化,优化第一阶段由改进的近似模型通过多岛遗传算法得到全局初步的最优解,第二阶段在初步解的基础上缩小优化变量范围,由少量的FEM计算即可在小范围内搜寻到精确的最优设计变量。结果表明:分区间泛化Kriging近似模型在预测多维度响应时较常规Kriging模型预测精度更高;分阶段的形状优化流程在保证极小误差和缩小计算成本的情况下能够得到理想的应力分布和重量优化结果,有助于船舶结构的轻量化研究。  相似文献   

Full-scale experimental modal analysis of an arch dam: The first experience in Iran     

《Soil Dynamics and Earthquake Engineering》2014

Forced vibration field tests and finite-element studies were conducted on the Shahid Rajaee concrete arch dam in Northern Iran to determine the dynamic properties of the dam–reservoir–foundation system. The first forced vibration tests on the dam were performed with two different types of exciter units, with a limited maximum force, bolted on the dam crest for alternative in-phase and out-of-phase sequencing. Because of an insufficient number of recording sensors, two arrangements of sensors were used to cover sufficient points on the dam crest and one gallery during tests. Two kinds of vibration tests, on–off and frequency sweeping, were carried out on the dam. The primary natural frequencies of the coupled system for both symmetric and anti-symmetric vibration modes were approximated during on–off tests in two types of sequencing of exciters, in phase and out-of-phase, with a maximum frequency of 14 Hz. The principal forced vibration tests were performed at precise resonant frequencies based on the results of the on–off tests in which sweeping around the approximated frequencies at 0.1 Hz increments was performed. Baseline correction and suitable bandpass filtering were applied to the test records and then signal processing was carried out to compute the auto power, cross power and coherence spectra. Nine middle modes of vibration of the coupled system and corresponding damping ratios were estimated. The empirical results are compared against the results from calibrated finite-element modeling of the system using former ambient vibration tests, considering the dam–reservoir–foundation interaction effects. Good agreement is obtained between experimental and numerical results for eight middle modes of the dam–reservoir–foundation system.  相似文献   

珊瑚颗粒形状对钙质粗粒土的压缩性能影响     

张斌  柴寿喜  魏厚振  孟庆山  陈杨 《工程地质学报》2020,28(1):85-93

珊瑚颗粒形状不规则是其显著区别于陆源土的一大特征。为揭示珊瑚颗粒形状对钙质粗粒土压缩性能的影响,人工挑选出不同形状(块状、枝状、棒状、片状)的珊瑚颗粒,以块状颗粒为基础,与其他3种不同形状的粗颗粒任意一种混合,控制不同颗粒形状配比制成钙质粗粒土试样,完成室内压缩试验,对比分析试验前后珊瑚颗粒的圆度、长宽比、扁平度和凹凸度等形状参数,评价颗粒形状对压缩性能的影响。结果表明:(1)粒径为10~20 mm钙质粗粒土的压缩模量是4~5. 5 MPa,回弹系数为42~53;(2)随枝状、棒状或片状颗粒掺量的增加(0、10%、20%、30%),试样压缩模量呈小幅波状变化,回弹系数呈持续减小趋势;(3)各加载区间应力-应变曲线包括应力快速增长阶段、应力-应变同步增长阶段、应变增长阶段共3个阶段和1个稳定点;(4)随枝状颗粒掺量的增加,试样的长宽比和凹凸度逐渐增加,圆度和扁平度基本无变化;因颗粒破碎的影响,试验后试样的长宽比及扁平度有所增加,圆度及凹凸度则有所减小。选择钙质粗粒土地基时,应考虑其压缩性能,避免施工初期的快速加载。  相似文献   

浅述深水水道的形态学特征          下载免费PDF全文

尚文亮  徐少华  李小刚  秦磊  杨丽玉  刘家恺  姚雪婷 《地质找矿论丛》2020,35(2):204-209

目前深水水道的分类方案较多,本文基于深水水道的形态学特征,且聚焦于单一型深水水道,将其划分为顺直型(曲率介于1～1.25)、低弯度S型(曲率介于1.25～1.5)和高弯度S型(曲率1.5)。其中,顺直型水道侵蚀作用最强,往往不发育天然堤沉积,无侧向加积;低弯度S型水道发育天然堤,并具有侧向加积;高弯度S型天然堤及侧向加积最为发育,决口扇常与之伴生。深水水道的曲率是水道形态的直观表现,曲率大小主要受深水地貌即深水地形坡度的影响。在上陆坡区域,地形坡度较大,沉积物能量强,深水水道以顺直型为主。中陆坡区域,随着地形坡度的减缓,水道的弯曲形态也逐渐增加,形成低弯度S型,直至下陆坡,水道演变为高弯度的S型。  相似文献   

窑洞外形特征对结构抗震性能影响研究          下载免费PDF全文

王飞剑  刘如山  马朝晖 《地震工程学报》2018,40(5):910-918

调查发现山西北部农村地区农居窑洞多是独立式土坯窑洞,结构主要受力体系是土坯砌体砌筑拱结构,其建造无统一标准,外形样式存在差异。由于拱结构的内力分布对外形尺寸变化比较敏感,为研究窑洞外形特征对结构抗震性能影响,建立相应的有限元模型进行计算分析,对比不同外形特征窑洞在地震作用下的损伤情况,并结合历史震害,指出窑洞结构的薄弱位置。研究结果表明覆土较厚的窑洞容易损伤,连拱孔数较多窑洞的两侧位置更容易发生破坏,拱的曲线形状对结构抗震性能有一定影响,合理拱曲线窑洞的抗震性能优于一般形状窑洞。  相似文献   

多维地震作用下大跨空间结构的减震控制分析          下载免费PDF全文

赵祥  刘忠华  王社良  杨涛  展猛 《地震工程学报》2018,40(3):398-405

考虑到多维地震输入对网架结构的不利影响,基于形状记忆合金超弹性,研制出一种兼具自复位、高耗能及放大功能于一体的形状记忆合金复合黏滞阻尼器(Hybrid Shape Memory Alloy Viscous Dampers,简称HSMAVD),并通过试验研究该阻尼器在循环荷载作用下的力学性能;然后以平面四角锥网架模型为基础,将该阻尼器替换部分网架结构杆件,并分析该阻尼器减震控制效果。结果表明形状记忆合金与黏滞阻尼器复合后具有良好的协同工作能力,可有效发挥形状记忆合金的超弹性和黏滞阻尼器的速度相关特性,使其具有稳定的滞回性能和良好的耗能能力;采用阻尼杆件替换原杆件的方法既能对结构进行有效的减震控制,又不改变原有的结构形式,是一种优越的减震控制方法,并为HSMAVD被动控制系统在结构抗震中的实际应用提供新思路。  相似文献   

Assessing the efficiency of shape-based functions and descriptors in multi-scale matching of linear objects     

Rahim Ali Abbaspour  Alireza Chehreghan  Amer Karimi 《国际地球制图》2018,33(8):879-892

  相似文献   

AlexNet支持下的地图建筑物形状分类方法     

焦洋洋  刘平芝  刘爱龙  刘松林 《地球信息科学学报》2022,24(12):2333-2341

地图目标的形状在地图制图综合、空间查询等研究中发挥着重要作用。地图建筑物形状的识别与分类作为建筑物轮廓化简与典型化的基础,一直是制图综合研究的热点问题。目前,主要的建筑物形状识别方法主要依赖对建筑物轮廓的描述,对建筑物等地图面状要素的形态特征有较强的依赖性,通常只在应对特定类型的规则轮廓或直角化轮廓时能发挥较好的效果,对于形状不规则或复杂的情况识别不佳。本文提出一种AlexNet支持下的地图建筑物形状分类方法,将矢量地图中建筑物数据的形状分类问题,转化为建筑物栅格图像的分类问题,通过完成卷积神经网络的图形分类实现建筑物的形状识别。该方法首先结合空间认知规律提出一系列典型建筑物形状类型,然后利用矢量-栅格转换的方法从OSM数据采样单体建筑物栅格图像,通过人工标识获得建筑物形状分类训练样本,训练AlexNet卷积神经网络分类模型,最后利用训练好的模型对大比例尺建筑物数据进行智能形状分类与识别。本文利用北京、香港2个城市的OSM建筑物数据作为样本训练建筑物形状分类模型,并在广州部分城区的OSM建筑物数据上进行验证。相较传统形状相似性度量方法,本文提出的方法对实验区建筑物的识别分类总体查全率提高了2.48%,达到92.32%,对于较为复杂的形状（如T形、十字形）识别也具有更高的精度,查准率分别提高了13.83%和24.53%。实验结果表明本文提出的方法对建筑物形状分类的效果有明显提升,能够实现常见建筑物形状的有效分类,为下一步的建筑物化简、典型化等综合操作打下了基础。  相似文献   

温敏堵漏水泥浆体系研究与应用          下载免费PDF全文

刘学鹏 《探矿工程》2022,49(2):110-116

温敏形状记忆聚合物是形状记忆材料的一种,其结构中存在记忆起始形状的固定相和随温度变化能可逆地固化和软化的可逆相。本文将这种材料性能应用于石油工程的固井领域,利用温敏聚合物温敏形变的特点,在井下温度升高时激发粒子形变形成大形变体,为封堵漏失层提供架桥结构,解决固井水泥浆防漏堵漏效果差、水泥车不能泵送较大尺寸颗粒的难题。研制的温敏堵漏材料初始粒径1 mm,达到温敏点后体积形变膨胀,应用温度60~140 ℃,加量0~2% BWOC;据此构建的温敏堵漏水泥浆体系,能有效封堵2 mm的缝隙板,承压7 MPa。温敏堵漏水泥浆先后在东北分公司北209井、北8井、北213-1井等的尾管或油层固井中进行了现场应用,尤其在北213-1井的固井堵漏过程中有效解决了固井漏失难题。  相似文献