Jason-2高度计电离层GIM误差分析及修正研究     

黄霞凤  苗洪利  苗翔鹰  薛文文 《海洋学报》2019,41(7):143-148

基于Jason-2高度计2015年地球物理数据集(GDR)38个周期太平洋海域的全球电离层图(GIM)电离层校正值和双频校正值的数据，分不同季度和不同纬度区域比较二者的差异，结果表明:GIM值与双频校正值之间存在明显的差异，GIM校正值普遍高于双频校正值，说明GIM高估了电离层路径延迟，GIM校正值与双频校正值的差异与季节和纬度区间有关。用梯度下降法得到GIM值的修正方程，将修正方程应用于2016年Jason-2的全年数据，修正后的GIM值与双频校正值十分接近，在各年份中均具有良好的适用性。在单频高度计不能使用电离层双频校正算法的情况下，可以利用不同季度和不同纬度区域的修正方程对同等高度的高度计GIM值进行修正以达到双频校正值的精度水平。  相似文献   

Evaluation of force-based and displacement-based out-of-plane seismic assessment methods for unreinforced masonry walls through refined model simulations     

Michele Godio  Katrin Beyer 《地震工程与结构动力学》2019,48(4):454-475

The performance of force-based and displacement-based seismic assessment methods for the life-safety limit state check of out-of-plane loaded unreinforced masonry walls is evaluated on the basis of refined numerical simulations. For this purpose, a discrete element model of a vertically spanning wall is built and validated against experimental results from static and dynamic test conditions. The model is then analysed for a large range of wall configurations. For each configuration, a static pushover analysis and a series of incremental dynamic analyses are run, the latter permitting to determine the capacity of the wall under dynamic loading. The accuracy of the assessment methods in predicting the acceleration at which the walls collapse is evaluated. It is found that the displacement-based method is more accurate, robust, and safe than the force-based method. The comparison also shows that for walls characterised by a relatively high ratio of axial load to Euler's critical load, both assessment methods lead to an overestimation of the wall capacity. As a remedy, a modification to the methods based on a recently developed mechanical model is put forward and tested. For the force-based method, it is additionally suggested to set for walls with relatively high overburden ratios the behaviour factor equal to 1. To ensure reproducibility of this study, all input and output files of the numerical simulations are made publicly available.  相似文献   

Responding to Global Warming: Mitigation Policies and Actions of Stakeholders in China’s Tourism Industry     

FENG Ling  CHEN Da  GAO Shan  WANG Yongzhi  TANG Chengcai 《资源与生态学报(英文版)》2019,10(1):94-103

China’s tourism industry has witnessed rapid progress in recent years, and is now an important part of global tourism in dealing with climate change. Within a framework of Pressure-State-Response (PSR), this paper focuses on the emission reduction pressure, carbon emission status, and responses of stakeholders in China’s tourism industry. Findings include: 1) The central government’s strategy and rapid growth of the industry scale exert rising pressure on China’s tourism to reduce carbon emissions. 2) Carbon emissions of China's tourism account for 13%-14.6% of global tourism, and about 3% of China’s emissions overall. Chinese tourists’ per capita carbon emission is lower than half of the global level. 3) The Chinese government attaches great importance to energy-saving and carbon emission reduction. In the tourism industry, documents, standards and other regulative measures have been issued to ensure that business practitioners set up green operational and managerial systems. In the field of tourism transportation, China's high-speed rail, new energy vehicles, and urban shared bicycles, have developed very rapidly in recent years, and they have effectively reduced the carbon emissions in traveling. Furthermore, this paper finds that Chinese tourists already have awareness and willingness for low-carbon tourism.  相似文献   

碎冰条件下单点系泊船舶动态响应特性研究     

杨佳东  吕海宁  王晋 《海洋工程》2019,37(2):29-39

为了研究不同单点系泊位置对极地系泊船舶在来冰角度改变时动态响应的影响,运用离散元方法(DEM),计算了船舶在60%密集度下,冰速为1.0 m/s、冰厚为1 m时不同角度的船冰阻力,结合系泊分析软件二次开发功能,计算分析系泊船舶在不同来冰角度和不同系泊位置下受上述冰情影响下的响应。通过对模拟结果与试验结果的对比,认为离散元方法(DEM)的数值模拟结果与试验结果吻合较好;单点系泊位置为距船头L/4时,系泊船舶能以最快速、最稳定的方式对来冰方向的变化做出响应。  相似文献   

Numerical homogenization-based seismic assessment of an English-bond masonry prototype: Structural level application     

Luís C. Silva  Paulo B. Lourenço  Gabriele Milani 《地震工程与结构动力学》2020,49(9):841-862

A multiscale strategy is evaluated at a structural level for the analysis of unreinforced masonry structures. The mechanical characterization of the masonry is deduced from homogenization-based micro-scale finite element (FE) models. The derived data are here employed at a structural level via a discrete FE model. The discrete FE model is composed of quadrilateral rigid plates interconnected through vertical and horizontal interfaces. On the interfaces, between adjoining discrete elements, a model that accounts for the in- and out-of-plane behavior of masonry, with damage and plasticity, is adopted. Such interfaces represent the material pre- and post-peak regimes, its orthotropy, and, depending on the micro-model assumed, account by three-dimensional shear effects that are especially important for multi-leaf walls and complex regular textures. The discrete model has been implemented in an advanced structural analysis software where powerful built-in features as the arc-length method, line-search algorithm, and implicit or explicit solver schemes are available. The multi-scale model is applied for the dynamic study of a small English-bond masonry house prototype subjected to a series of consecutive earthquake records. Detailed comparisons between the experimental and numerical data are presented, including the results obtained through a continuous total strain rotating crack model. Quasi-static and dynamic analyses are conducted. Results demonstrate that when enough experimental information is available on the masonry components under tension, shear, and compression regimes, the approach predicts well the seismic structural response in terms of time-history displacements, seismic capacity, and damage patterns. The required computational cost (CPU time) is very attractive.  相似文献   

Surficial fractures in the Navajo sandstone,south-western USA: the roles of thermal cycles,rainstorms, granular disintegration,and iterative cracking     

David B. Loope  Garrison R. Loope  Caroline M. Burberry  Clinton M. Rowe  Gerald C. Bryant 《地球表面变化过程与地形》2020,45(9):2063-2077

Deep (> 5 m) sheeting fractures in the Navajo sandstone are evident at numerous sites in southern Utah and derive from tectonic stresses. Strong diurnal thermal cycles are, however, the likely triggers for shallow (< 0.3 m) sheeting fractures. Data from subsurface thermal sensors reveal that large temperature differences between sensors at 2 and 15 cm depth on clear summer afternoons are as great as those that trigger sheeting fractures in exposed California granite. Extensive polygonal patterns in the Navajo sandstone are composed of surface-perpendicular fractures and were produced by contractile stresses. Numerous studies have shown that porewater diminishes the tensile strength of sandstone. Based on our thermal records, we propose that cooling during monsoonal rainstorms triggers polygonal fracturing of temporarily weakened rock. On steep outcrops, polygonal patterns are rectilinear and orthogonal, with T-vertices. Lower-angle slopes host hexagonal patterns (defined by the dominance of Y-vertices). Intermediate patterns with rectangles and hexagons of similar scale are common. We posit that outcropping fractures are advancing downward by iterative steps, and that hexagons on sandstone surfaces (like prismatic columns of basalt) have evolved from ancestral orthogonal polygons of similar scale. In lava flows, fractures elongate intermittently as they follow a steep thermal gradient (the source of stress) as it rapidly moves through the rock mass. In our model, a steep, surficial thermal gradient descends through unfractured sandstone, but at the slow pace of granular disintegration. Through time, as the friable rock on stable slopes erodes, iterative cracking advances into new space. Hexagonal patterns form as new fractures, imperfectly guided by the older ones, propagate in new directions, and vertices drift into a configuration that minimizes the ratio of fracture length to polygon area. © 2020 John Wiley & Sons, Ltd.  相似文献   

基于2 m格网点云数据的高精度DEM制作第三次国土调查坡度图     

李国华 《测绘通报》2020,(8):117-121

地形地貌随着时间的推移时刻发生变化，以高精度数字高程模型（EDE）数据制作坡度图，进而计算田坎系数，更精准地进行耕地面积计算及统计。以2 m格网点云数据生成的DEM数据为基础，按照第三次全国国土调查的相关技术要求，根据耕地坡度分级要求进行分级，生成坡度分级栅格数据图。对坡度分级栅格数据图进行矢量化，生成坡度分级矢量化数据。对矢量化数据进行图斑综合、界线平滑、拓扑重建、数据裁切等处理，制作完成调查区域坡度图及相关属性数据制作。并对生产的坡度图成果进行分析，找出不同尺度格网生产的坡度图的技术差异，并对高精度坡度的应用进行了展望。  相似文献   

一种云端一体化的土地督察遥感监测方法     

孙久虎 《测绘通报》2020,(3):129-133

针对目前土地遥感监测工作中存在的监测频次低和数据现势性差等问题，通过统筹获取国产卫星影像数据提升监测频次，设计了多源遥感影像的空间网格组织和调度方法，改变传统的影像切片发布模式，建立实时影像服务方法，大幅提升了土地督察遥感监测时效。通过在国家土地督察济南局试点应用，研发了云端一体化的土地督察遥感监测服务平台，实践证明基于空间网格的影像组织管理效率优于传统金字塔切片管理模式，有效支撑了违法用地、永久基本农田保护和城市开发边界突破等监测预警，应用成效显著。  相似文献   

基于自然间断点分级法的土地利用数据网格化分析   总被引：4，自引：0，他引：4  

李乃强  徐贵阳 《测绘通报》2020,(4):106

土地利用在自然资源统一管理中扮演着重要角色，面对不同区域和年份的数据，统一分析比对口径尤为重要，同时也应反映出相互之间的差异。本文以宜兴市2009年和2017年土地利用现状数据为数据源，首先使用统一的分类标准提取用地类型中的3大类，通过不同大小的单元划分尝试和结果分析，发现适用于该数据的网格尺度大小；然后基于自然间断点分级法进行分级范围划定，对宜兴市三类用地类型的分布和变化趋势进行综合分析，较为真实地反映了宜兴市用地情况；最后通过选用合适的空间尺度和分级范围划定方法，进而构建一个兼具操作性和科学性的土地利用数据网格化方法，为自然资源部门统筹管理和综合治理提供依据。  相似文献   

FY-3D/MERSI-II全球火点监测产品及其应用   总被引：1，自引：0，他引：1  

郑伟  陈洁  闫华  刘诚  唐世浩 《遥感学报》2020,24(5):521-530

FY-3D/MERSI-II全球火点监测产品主要包括全球范围内的火点位置、亚像元火点面积和火点强度等信息,可用于实时监测全球范围的森林草原火灾、秸秆焚烧等生物质燃烧状况。火点判识算法主要根据中红外通道对高温热源的敏感特性,即含有火点的中红外通道像元辐亮度和亮温较远红外通道的辐亮度和亮温偏高,同时较周边非火点的中红外像元偏高,建立合适的阈值可探测含有火点的像元。亚像元火点面积估算主要使用中红外单通道估算,根据亚像元火点面积估算结果对火点强度进行分级,不同的级别表示不同程度的火点辐射强度。基于全球火点自动判识结果,每日生成0.01°分辨率的卫星遥感日全球火点产品,每月生产0.25°×0.25°格点的全球月火点密度图。在利用FY-3D/MERSI-II火点产品开展的全球火点监测应用中,对多起全球重大野火事件进行了监测,为防灾减灾、全球气候变化研究、生态环境保护等方面提供卫星遥感信息支持。  相似文献