Describing alpine lake influence on stream network temperatures: A statistical modelling approach     

Samuel P. Carlson  Geoffrey C. Poole 《水文研究》2021,35(3):e14072

Systematic variations in atmospheric heat exchange, surface residence time, and groundwater influx across montane stream networks commonly produce an increasing stream temperature trend with decreasing elevation. However, complex stream temperature profiles that differ from this common longitudinal trend also exist, suggesting that stream temperatures may be influenced by complex interactions among hydrologic and atmospheric processes. Lakes within stream networks form one potential source of temperature profile complexity due to the spatially variable contribution of lake-sourced water to stream flow. We investigated temperature profile complexity in a multi-season stream temperature dataset collected across a montane stream network containing many alpine lakes. This investigation was performed by making comparisons between multiple statistical models that used different combinations of stream and lake characteristics to represent specific hypotheses for the controls on stream temperature. The compared models included a set of models which used a topographically derived estimate of the hydrologic influence of lakes to separate and quantify the effects of stream elevation and lake source-water contributions to longitudinal stream temperature patterns. This source-water mixing model provided a parsimonious explanation for complex stream-network temperature patterns in the summer and autumn, and this approach may be further applicable to other systems where stream temperatures are influenced by multiple water sources. Simpler models that discounted lake effects were more optimal during the winter and spring, suggesting that complex patterns in stream temperature profiles may emerge and subside temporally, across seasons, in response to diversity of water temperatures from different sources.  相似文献   

基于能量原理的粘滞阻尼器附加阻尼系数分配方法研究          下载免费PDF全文

王子龙  任文杰  杨新磊  陈博文 《世界地震工程》2020,(3):027-37

以线性粘滞阻尼器加固剪切型规则框架结构为研究对象，基于能量原理提出附加阻尼系数正比于层间位移平方的分配方式。以六层和十二层钢筋混凝土框架为例，以确保结构在中震时保持弹性状态为设计目标，分别采用附加阻尼系数正比于层间位移平方的分配方式以及现有的分配方式，对结构进行消能减震设计。计算结果表明:有控结构均满足中震不坏的要求，层间位移角限值均未超过1/550，减震效果良好；附加阻尼系数正比于层间位移平方的分配方式得出的总阻尼系数最小，为最经济的设计结果。  相似文献   

利用InSAR资料反演宁洱Ms6.4地震震源参数及库仑应力变化     

陈晨月  冯光财  高华  杨怀宁 《大地测量与地球动力学》2019,39(3):295-301

首先利用ALOS PALSAR数据，通过D-InSAR技术获取2007-06-03云南宁洱MS6.4地震的同震形变场，然后基于Okada弹性半空间位错模型反演该地震的断层几何以及精细滑动分布，最后计算宁洱地震后周边断层的静态库仑应力变化。结果表明，形变主要集中在西盘，最大视线向形变量为51.6 cm；反演得到的震源位置为23.05°N、101.02°E，深度3 km，断层走向145°，倾向49.5°，平均滑动角153°，发震断层为NNW向普洱断裂，断层活动以右旋走滑为主，兼具逆冲分量；断层面最大滑动量为1.2 m，反演得到的震级为MW619。基于库仑应力场发现，磨黑断裂处于库仑应力增加区域，而2014年景谷地震位于负值区域。结合实地考察资料和反演结果表明，宁洱地震为浅源地震，但断层并未出露地表。  相似文献   

Experimental investigation on a cabin-suspended catamaran in terms of motion reduction and wave energy harvesting by means of a semi-active motion control system     

《Applied Ocean Research》2019

A novel concept catamaran equipped with a suspended cabin, named Wave Harmonizer Type 4 (WHzer-4), is proposed and evaluated. The mass-spring-mass system is constructed by mounting four sets of suspensions in-between the cabin and the twin-hull. Two sets of dual motor/generators (M/Gs) are attached on the center beam of the cabin's deck fore and aft. Each shaft-end of the dual M/Gs is connected to the twin-hull through a rack-pinion gear unit. In this way the vertical relative motion between the cabin and the twin-hull can be transferred into the rotational motion of the M/Gs, and vice versa. A semi-active motion control system, which contains a proportional-integral (PI) controller, is designed and applied to each of the dual M/Gs for the aim of absorbing wave energy under the condition of suppressing the local vertical velocity of the cabin as much as possible. A 1/5 scale model ship with a length of 1.6 m is built, and a forced-oscillation bench test is implemented to validate the performance of the control system. Then, a series of towing tank tests is carried out in regular head waves. The heave and pitch responses of the cabin, those of the twin-hull and the corresponding wave energy capture width ratio (CWR) at five control scenarios and two reference scenarios are investigated. Discussion on the results of the tank test shows that the motion reduction of the cabin and the wave energy harvesting can be achieved simultaneously at a few wave conditions. However, at other conditions, although noticeable amount of wave energy is harvested, motion reduction of the heave and pitch of the cabin could not be obtained at the same time. It is suggested that varying the gain settings of the PI controllers according to the location of the controllers may improve the effectiveness of the proposed control system.  相似文献   

Adsorption Mechanism and Kinetic Characterization of Bituminous Coal under High Temperatures and Pressures in the Linxing-Shenfu Area     

TAO Chuanqi  WANG Yanbin  LI Yong  NI Xiaoming  GAO Xiangdong 《《地质学报》英文版》2020,94(2):399-408

The majority of coalbed methane(CBM) in coal reservoirs is in adsorption states in coal matrix pores. To reveal the adsorption behavior of bituminous coal under high-temperature and high-pressure conditions and to discuss the microscopic control mechanism affecting the adsorption characteristics, isothermal adsorption experiments under hightemperature and high-pressure conditions, low-temperature liquid nitrogen adsorption-desorption experiments and CO2 adsorption experiments were performed on coal samples. Results show that the adsorption capacity of coal is comprehensively controlled by the maximum vitrinite reflectance(Ro, max), as well as temperature and pressure conditions. As the vitrinite reflectance increases, the adsorption capacity of coal increases. At low pressures, the pressure has a significant effect on the positive effect of adsorption, but the effect of temperature is relatively weak. As the pressure increases, the effect of temperature on the negative effect of adsorption gradually becomes apparent, and the influence of pressure gradually decreases. Considering pore volumes of pores with diameters of 1.7-100 nm, the peak volume of pores with diameters 10-100 nm is higher than that from pores with diameters 1.7-10 nm, especially for pores with diameters of 40-60 nm, indicating that pores with diameters of 10-100 nm are the main contributors to the pore volume. The pore specific surface area shows multiple peaks, and the peak value appears for pore diameters of 2-3 nm, indicating that this pore diameter is the main contributor to the specific surface area. For pore diameters of 0.489-1.083 nm, the pore size distribution is bimodal, with peak values at 0.56-0.62 nm and 0.82-0.88 nm. The adsorption capability of the coal reservoir depends on the development degree of the supermicroporous specific surface area, because the supermicroporous pores are the main contributors to the specific pore area. Additionally, the adsorption space increases as the adsorption equilibrium pressure increases. Under the same pressure, as the maximum vitrinite reflectance increases, the adsorption space increases. In addition, the cumulative reduction in the surface free energy increases as the maximum vitrinite reflectance increases. Furthermore, as the pressure increases, the surface free energy of each pressure point gradually decreases, indicating that as the pressure increases, it is increasingly difficult to adsorb methane molecules.  相似文献   

烃源岩不同性质有机酸的分离及其检测方法     

杜佳宗  何蓓  蔡进功  雷天柱  刘庆  谢忠怀 《高校地质学报》2020,26(5):540-548

烃源岩中的有机酸来源于有机质，但有机质具有不同的赋存形式，有机酸具有不同性质，这将影响有机酸与不同赋存有机质的关系，进而影响分离和检测方法。文章在总结前人对有机质赋存形式和有机酸性质等特征的基础上，提出烃源岩中的有机酸并以非单一的形式存在，具有水溶性、脂溶性和难溶性有机酸三种类型，游离有机质中存在水溶性和脂溶性有机酸，而结合有机质中存在水溶性、脂溶性和难溶性有机酸。因此在检测方法上需采取分步分离的方法，且根据有机酸的性质选取合适的检测方法，即水溶性有机酸利用离子色谱检测，索氏抽提得到的脂溶性有机酸利用气相色谱—质谱检测，通过酸解抽提残渣得到的难溶性有机酸利用红外光谱检测，全面系统地认识烃源岩中有机酸含量和类型等特征。这对进一步探讨烃源岩各种类型有机酸特征和演化规律，深化烃源岩有机质生烃以及有机—无机相互作用等机理都具有重要意义。  相似文献   

探秘“能源新星”——干热岩          下载免费PDF全文

王文  吴纪修  施山山  李小洋 《探矿工程》2020,47(3):88-93

干热岩是近些年逐渐发展起来的清洁能源，指埋藏于地球表面3000 m以深，不含或含少量水或蒸汽等流体，温度在180 ℃以上且渗透率极低的岩体。对干热岩的应用主要是建立增强型地热系统进行发电。目前对干热岩的研究尚处于起步阶段,干热岩的热源、热储、形成机理、埋藏机制等都未形成完整的理论体系，干热岩的开发过程也面临诸如储层改造、高温钻探以及随钻监测等一系列的技术“瓶颈”。干热岩资源储量大，开发利用过程低碳环保、节能高效，是国际社会公认的优质清洁能源，但是干热岩研究程度低，开发难度大，需要不断的知识积累和技术积累。本文从科普的角度列举了干热岩的相关研究现状及存在的问题，以期能让更多的人对这一“能源新星”加深了解。  相似文献   

岩溶水硝酸盐污染原位修复试验     

叶进霞  夏春英  卜鸿志 《中国岩溶》2020,39(2):173-179

岩溶含水层的极不均一性特征使岩溶水溶质运移受构造、裂隙空间及其发育方向控制；因环境条件复杂，开展岩溶水污染原位修复技术难度较大，截止目前，国内尚未系统地开展岩溶含水层水污染原位修复研究工作。文章选择鲁中南山区典型岩溶发育及硝酸盐污染地段，施工组合钻孔建设修复试验工程，采用“乙醇+葡萄糖”液态碳源和“聚乙烯醇+淀粉颗粒”固态反应器分别进行岩溶水硝酸盐污染原位修复试验。结果表明:浓度500 mg?L－1、1 000 mg?L－1的“乙醇+葡萄糖”反硝化溶液对硝酸盐浓度的降解率分别为6.45 %和21.52 %；单位长度组成材料“聚乙烯醇3 kg+淀粉颗粒3 kg”、“聚乙烯醇2 kg+淀粉颗粒4 kg”的两种反硝化固态反应器对硝酸盐浓度的降解率分为33.91%和34.96%。试验证明在裂隙型岩溶地区采用孔组方案进行地下水污染原位修复技术可行、且能取得较显著效果。修复工程布设方式和试验成果对类似地区开展岩溶地下水污染原位修复具一定借鉴意义。   相似文献   

The thermal maturity of sedimentary basins as revealed by magnetic mineralogy     

Mansour M. Abdelmalak  Stéphane Polteau 《Basin Research》2020,32(6):1510-1531

The thermal evolution of sedimentary basins is usually constrained by maturity data, which is interpreted from Rock-Eval pyrolysis and vitrinite reflectance analytical results on field or boreholes samples. However, some thermal evolution models may be inaccurate due to the use of elevated maturities measured in samples collected within an undetected metamorphic contact aureole surrounding a magmatic intrusion. In this context, we investigate the maturity and magnetic mineralogy of 16 claystone samples from Disko-Svartenhuk Basin, part of the SE Baffin Bay volcanic margin. Samples were collected within thermal contact metamorphic aureoles near magma intrusions, as well as equivalent reference samples not affected by intrusions. Rock-Eval pyrolysis (T_max), and vitrinite reflectance (Ro) analysis were performed to assess the thermal maturity, which lies in the oil window when 435°C ≤ T_max ≤ 470°C and 0.6%–0.7% ≤ Ro ≤ 1.3%. In addition, we performed low- (<300K) and high-temperature (>300K) investigations of isothermal remanent magnetization to assess the magnetic mineralogy of the selected samples. The maturity results (0.37% ≤ Ro ≤ 2%, 22°C ≤ T_max ≤ 604°C) show a predominance of immature to early mature Type III organic matter, but do not reliably identify the contact aureole when compared to the reference samples. The magnetic assemblage of the immature samples consists of iron sulphide (greigite), goethite and oxidized or non-stoichiometric magnetite. The magnetic assemblage of the early mature to mature samples consists of stoichiometric magnetite and fine-grained pyrrhotite (<1 μm). These results document the disappearance of the iron sulphide (greigite) and increase in content of magnetite during normal burial. On the other hand, magnetite is interpreted to be the dominant magnetic mineral inside the contact aureole surrounding dyke/sill intrusions where palaeotemperatures indicate mature to over-mature state. Interestingly, the iron sulphide (greigite) is still detected in the contact aureole where palaeotemperatures exceeded 130°C. Therefore, the magnetic mineralogy is a sensitive method that can characterize normal burial history, as well as identify hidden metamorphic contact aureoles where the iron sulphide greigite is present at temperatures beyond its stability field.  相似文献   

基于自然区块的城市热环境空间分异性研究     

杨智威  陈颖彪  吴志峰  千庆兰  黄清瑶 《地理科学进展》2019,38(12):1944-1956

通过有效解决建设用地子类划分,实现定量评价城市热环境的空间分异性,对改善城市生态环境、实现城市化的健康发展具有重要的意义和科学价值。论文以广州市为例,参考自然城市的概念,基于5类兴趣点(Point Of Interest,POI)开放数据,结合城市建设用地分类标准,构建5类自然区块;在Landsat 8遥感影像地表温度反演的基础上,计算分析自然区块下地表热场等级分布格局、热场平均值及热环境足迹范围,以对城市热环境空间分异性进行评价。研究表明：① 自然区块的构建,能准确地反映各类POI数据空间分布情况,能够实现对建设用地子类型的划分;② 5类自然区块内部地表热场等级均以高温像元为主,但等级分布具有显著差异。同时,自然区块的热场平均值由高到低的排序为：工业区块>商业服务业区块>交通与道路区块>居住区块>公共管理与服务区块;③ 自然区块形成的高温集聚区,存在热量扩散现象,实际影响范围大于其物理边界,5类自然区块的热环境足迹范围具有分异性。热环境足迹影响范围由大到小排序为：工业区块>商业服务业区块>居住区块>道路与交通区块>公共管理与服务区块。研究结果可为微观尺度上分析城市热环境、改善城市生态环境、实现城市化的健康发展提供科学依据。  相似文献