Moving from plot-based to hillslope-scale assessments of savanna vegetation structure with long-range terrestrial laser scanning (LR-TLS)     

《International Journal of Applied Earth Observation and Geoinformation》2020

Reliable quantification of savanna vegetation structure is critical for accurate carbon accounting and biodiversity assessment under changing climate and land-use conditions. Inventories of fine-scale vegetation structural attributes are typically conducted from field-based plots or transects, while large-area monitoring relies on a combination of airborne and satellite remote sensing. Both of these approaches have their strengths and limitations, but terrestrial laser scanning (TLS) has emerged as the benchmark for vegetation structural parameterization – recording and quantifying 3D structural detail that is not possible from manual field-based or airborne/spaceborne methods. However, traditional TLS approaches suffer from similar spatial constraints as field-based inventories. Given their small areal coverage, standard TLS plots may fail to capture the heterogeneity of landscapes in which they are embedded. Here we test the potential of long-range (>2000 m) terrestrial laser scanning (LR-TLS) to provide rapid and robust assessment of savanna vegetation 3D structure at hillslope scales. We used LR-TLS to sample entire savanna hillslopes from topographic vantage points and collected coincident plot-scale (1 ha) TLS scans at increasing distances from the LR-TLS station. We merged multiple TLS scans at the plot scale to provide the reference structure, and evaluated how 3D metrics derived from LR-TLS deviated from this baseline with increasing distance. Our results show that despite diluted point density and increased beam divergence with distance, LR-TLS can reliably characterize tree height (RMSE = 0.25–1.45 m) and canopy cover (RMSE = 5.67–15.91%) at distances of up to 500 m in open savanna woodlands. When aggregated to the same sampling grain as leading spaceborne vegetation products (10–30 m), our findings show potential for LR-TLS to play a key role in constraining satellite-based structural estimates in savannas over larger areas than traditional TLS sampling can provide.  相似文献   

Lidar-aided analysis of boreal forest backscatter at Ku band     

《International Journal of Applied Earth Observation and Geoinformation》2020

This paper analyzes the backscatter of the microwave signal in a boreal forest environment based on a Ku -band airborne Frequency-Modulated Continuous Waveform (FMCW) profiling radar—Tomoradar. We selected a half-managed boreal forest in the southern part of Finland for a field test. By decomposing the waveform collected by the Tomoradar, the vertical canopy structure was achieved. Based on the amplitude of the waveform, the Backscattered Energy Ratio of Canopy-to-Total (BERCT) was calculated. Meanwhile, the canopy fraction was derived from the corresponding point cloud recorded by a Velodyne VLP-16 LiDAR mounted on the same platform. Lidar-derived canopy fraction was obtained by counting the number of the first/ the strongest returns versus the total amount of returns. Qualitative and quantitative analysis of radar-derived BERCT on lidar-derived canopy fraction and canopy height are investigated. A fitted model is derived to describe the Ku-band microwave backscatter in the boreal forest to numerically analyze the proportion contributed by four factors: lidar-derived canopy fraction, radar-derived canopy height, the radar-derived distance between trees and radar sensor and other factors, from co-polarization Tomoradar measurements. The Root Mean Squared Error (RMSE) of the proposed model was 0.0958, and the coefficient of determination R2 was 0.912. The fitted model reveals that the correlation coefficient between radar-derived BERCT and lidar-derived canopy fraction is 0.84, which illustrates that lidar surface reflection explains the majority of the profiling /waveform radar response. Thus, vertical canopy structure derived from lidar can be used for the benefit of radar analysis.  相似文献   

Inter-comparison of remote sensing platforms for height estimation of mango and avocado tree crowns     

《International Journal of Applied Earth Observation and Geoinformation》2020

To support the adoption of precision agricultural practices in horticultural tree crops, prior research has investigated the relationship between crop vigour (height, canopy density, health) as measured by remote sensing technologies, to fruit quality, yield and pruning requirements. However, few studies have compared the accuracy of different remote sensing technologies for the estimation of tree height. In this study, we evaluated the accuracy, flexibility, aerial coverage and limitations of five techniques to measure the height of two types of horticultural tree crops, mango and avocado trees. Canopy height estimates from Terrestrial Laser Scanning (TLS) were used as a reference dataset against height estimates from Airborne Laser Scanning (ALS) data, WorldView-3 (WV-3) stereo imagery, Unmanned Aerial Vehicle (UAV) based RGB and multi-spectral imagery, and field measurements. Overall, imagery obtained from the UAV platform were found to provide tree height measurement comparable to that from the TLS (R² = 0.89, RMSE = 0.19 m and rRMSE = 5.37 % for mango trees; R² = 0.81, RMSE = 0.42 m and rRMSE = 4.75 % for avocado trees), although coverage area is limited to 1–10 km² due to battery life and line-of-sight flight regulations. The ALS data also achieved reasonable accuracy for both mango and avocado trees (R² = 0.67, RMSE = 0.24 m and rRMSE = 7.39 % for mango trees; R² = 0.63, RMSE = 0.43 m and rRMSE = 5.04 % for avocado trees), providing both optimal point density and flight altitude, and therefore offers an effective platform for large areas (10 km²–100 km²). However, cost and availability of ALS data is a consideration. WV-3 stereo imagery produced the lowest accuracies for both tree crops (R² = 0.50, RMSE = 0.84 m and rRMSE = 32.64 % for mango trees; R² = 0.45, RMSE = 0.74 m and rRMSE = 8.51 % for avocado trees) when compared to other remote sensing platforms, but may still present a viable option due to cost and commercial availability when large area coverage is required. This research provides industries and growers with valuable information on how to select the most appropriate approach and the optimal parameters for each remote sensing platform to assess canopy height for mango and avocado trees.  相似文献   

Modelling forest canopy gaps using LiDAR-derived variables   总被引：1，自引：0，他引：1  

Leighton Lombard  Riyad Ismail 《国际地球制图》2019,34(2):179-193

Remote sensing has revolutionized forest management and has been widely employed to model canopy gaps. In this study, a canopy height model (CHM) and an intensity raster (IR) derived from light detection and ranging (LiDAR) data were used to model canopy gaps within a four-year-old Eucalyptus grandis forest using an object-based image analysis (OBIA) approach. Model thematic accuracies using the CHM, intensity raster and combined data set (CHM and IR) were all above 90%, with KHAT values ranging from 0.88 to 0.96. Independent test thematic accuracies were also above 90%, with KHAT values ranging from 0.82 to 0.91. A comparative area-based assessment yielded accuracies ranging from 70 to 90%, with the highest accuracies achieved using the combined data set. The results of this study show that using a CHM and intensity raster, and an OBIA approach, provides a viable framework to accurately detect and delineate canopy gaps within a commercial forest environment.  相似文献   

城市近地层湍流特征分析   总被引：3，自引：3，他引：0  

邹钧  孙鉴泞  刘罡 《气象科学》2011,31(4):525-533

利用中国科学院大气物理研究所在北京的325 m铁塔观测资料,本文分析了47、140和280 m三个高度的湍流统计特征.结果表明,城市近地层的湍流速度方差和湍流温度方差都较好地满足局地相似关系,140 m和280 m的湍流特征非常接近,而47 m的湍流特征与之相比表现出明显的差异,说明由于城市冠层动力和热力非均匀性的影响...  相似文献   

Terrestrial laser scanning to estimate plot-level forest canopy fuel properties     

Mariano García  F. Mark Danson  David Riaño  Emilio Chuvieco  F. Alberto Ramirez  Vishal Bandugula 《International Journal of Applied Earth Observation and Geoinformation》2011

This paper evaluates the potential of a terrestrial laser scanner (TLS) to characterize forest canopy fuel characteristics at plot level. Several canopy properties, namely canopy height, canopy cover, canopy base height and fuel strata gap were estimated. Different approaches were tested to avoid the effect of canopy shadowing on canopy height estimation caused by deployment of the TLS below the canopy. Estimation of canopy height using a grid approach provided a coefficient of determination of R² = 0.81 and an RMSE of 2.47 m. A similar RMSE was obtained using the 99th percentile of the height distribution of the highest points, representing the 1% of the data, although the coefficient of determination was lower (R² = 0.70). Canopy cover (CC) was estimated as a function of the occupied cells of a grid superimposed upon the TLS point clouds. It was found that CC estimates were dependent on the cell size selected, with 3 cm being the optimum resolution for this study. The effect of the zenith view angle on CC estimates was also analyzed. A simple method was developed to estimate canopy base height from the vegetation vertical profiles derived from an occupied/non-occupied voxels approach. Canopy base height was estimated with an RMSE of 3.09 m and an R² = 0.86. Terrestrial laser scanning also provides a unique opportunity to estimate the fuel strata gap (FSG), which has not been previously derived from remotely sensed data. The FSG was also derived from the vegetation vertical profile with an RMSE of 1.53 m and an R² = 0.87.  相似文献   

Reducing background effects in orchards through spectral vegetation index correction     

《International Journal of Applied Earth Observation and Geoinformation》2015

Satellite remote sensing provides an alternative to time-consuming and labor intensive in situ measurements of biophysical variables in agricultural crops required for precision agriculture applications. In orchards, however, the spatial resolution causes mixtures of canopies and background (i.e. soil, grass and shadow), hampering the estimation of these biophysical variables. Furthermore, variable background mixtures obstruct meaningful comparisons between different orchard blocks, rows or within each row. Current correction methodologies use spectral differences between canopies and background, but struggle with a vegetated orchard floor. This background influence and the lack of a generic solution are addressed in this study.Firstly, the problem was demonstrated in a controlled environment for vegetation indices sensitive to chlorophyll content, water content and leaf area index. Afterwards, traditional background correction methods (i.e. soil-adjusted vegetation indices and signal unmixing) were compared to the proposed vegetation index correction. This correction was based on the mixing degree of each pixel (i.e. tree cover fraction) to rescale the vegetation indices accordingly and was applied to synthetic and WorldView-2 satellite imagery. Through the correction, the effect of background admixture for vegetation indices was reduced, and the estimation of biophysical variables was improved (ΔR² = 0.2–0.31).  相似文献   

Detecting forest damage after a low-severity fire using remote sensing at multiple scales     

《International Journal of Applied Earth Observation and Geoinformation》2015

Remote sensing technologies are an ideal platform to examine the extent and impact of fire on the landscape. In this study we assess that capacity of the RapidEye constellation and Landsat (Thematic Mapper and Operational Land Imager to map fine-scale burn attributes for a small, low severity prescribed fire in a dry Western Canadian forest. Estimates of burn severity from field data were collated into a simple burn index and correlated with a selected suite of common spectral vegetation indices. Burn severity classes were then derived to map fire impacts and estimate consumed woody surface fuels (diameter ≥2.6 cm). All correlations between the simple burn index and vegetation indices produced significant results (p < 0.01), but varied substantially in their overall accuracy. Although the Landsat Soil Adjusted Vegetation Index provided the best regression fit (R² = 0.56), results suggested that RapidEye provided much more spatially detailed estimates of tree damage (Soil Adjusted Vegetation Index, R² = 0.51). Consumption estimates of woody surface fuels ranged from 3.38 ± 1.03 Mg ha⁻¹ to 11.73 ± 1.84 Mg ha⁻¹, across four derived severity classes with uncertainties likely a result of changing foliage moisture between the before and after fire images. While not containing spectral information in the short wave infrared, the spatial variability provided by the RapidEye imagery has potential for mapping and monitoring fine scale forest attributes, as well as the potential to resolve fire damage at the individual tree level.  相似文献   

基于无人机多源遥感数据海岛植被叶面积指数协同反演研究     

吴剑  陈鹏  傅世锋  陈庆辉  潘翔  宋志晓 《海洋技术学报》2019,38(6):1-8

无人机多源遥感数据的获取、融合以及应用是当今研究的热点和难点。文中以城洲岛为例,针对海岛特殊的地理生态环境,获取无人机多源遥感数据。结合无人机多光谱遥感数据定量分析各遥感植被指数与植被叶面积指数(Leaf Area Index, LAI)的响应关系,构建单因子遥感反演模型;基于无人机激光LiDAR点云提取海岛植被冠层高度模型(Canopy Height Model,CHM),并将其作为自变量引入到多源统计回归分析中,从而构建多源遥感数据协同反演模型,对区域尺度下海岛叶面积指数(LAI)进行估算,开展验证和精度评价。结果显示,加入植被冠层高度因子的协同反演模型的判定系数R2为0.92,绝对平均误差系数为12.29%,预测精度要优于单因子反演模型(判定次数R2为0.86,绝对平均误差系数19.95%)。研究表明,加入了植被冠层高度因子的协同反演模型能在一定程度上提高乔木植被LAI的预测精度。实践证明,无人机多源遥感技术在生态学定量研究中具有巨大的潜力和广阔的应用前景。  相似文献   

Nutrient Fluxes in Rainfall,Throughfall, and Stemflow in Pinus densata Natural Forest of Tibetan Plateau     

《洁净——土壤、空气、水》2017,45(7)

  相似文献