排序方式： 共有6条查询结果，搜索用时 15 毫秒
1
1.
激光云高仪和云雷达是探测云底的两种设备,但其探测能力和探测结果有一定的差异,对比分析两种设备的测云效果有助于正确认识它们的探测优势,推进我国云雷达在云探测中的应用。本文提出了基于云雷达数据的云底和云顶高度分析方法,利用2014年夏季第三次青藏高原大气科学试验云雷达、激光雷达和激光云高仪数据,统计了三种设备探测青藏高原低云、中云和高云的云底高度偏差、探测率,分析了激光云高仪探测云底偏高的原因,根据探测结果提出了固态发射机体制雷达探测青藏高原低云的优化观测模式,模拟分析了探测效果。结果表明:（1）云雷达对高云的探测能力要明显优于激光云高仪,但其对低云的探测能力有待改进,激光云高仪探测云底下部的边界层内的云雷达回波信号可能是非云降水回波;低层云的遮挡作用明显降低了激光云高仪对多层云的观测能力;与激光云高仪相比,云雷达仍然会漏掉一些高云和中云。（2）激光云高仪探测的中云和高云的云底很多在云雷达回波内部,云雷达和激光云高仪观测的云底的时空对应关系比较差。（3）增大激光发射功率和优化固态发射机体制云雷达观测模式可提高云的观测能力,微波和激光雷达数据融合可全面了解不同类型云的宏观特征。这一工作为云雷达和激光雷达数据的应用,评估激光云高仪和云雷达探测青藏高原云的能力,讨论设计优化的云观测方案,为推进我国云观测技术的发展提供了重要参考依据。 相似文献
2.
大气边界层高度是天气、气候、大气环境研究中的一个重要参数,目前尚缺少基于激光雷达探测系统反演全天边界层高度的有效方法。文中利用北京朝阳站、大兴站的激光云高仪数据,首先评估了梯度法、标准偏差法、曲线拟合法和小波协方差法反演边界层高度的适用性和局限性,发现梯度法容易受环境噪声的影响,曲线拟合法稳定性较好,但在夜间弱湍流条件下会将残留层高度误判为夜间边界层高度。提出两步曲线拟合法,将一天中边界层结构划分为白天的对流边界层、夜间的残留层和稳定边界层,通过用不同的理想曲线对其进行两步拟合,获取全天边界层高度的变化。将两步曲线拟合法的反演结果与基于L波段探空雷达的位温梯度法的探测结果进行比较发现:两者相关系数为0.91,证明了两步曲线拟合法的可行性以及激光云高仪探测边界层高度的应用潜力。采用该方法反演2017年5—6月朝阳站与大兴站边界层高度,对比发现:城区特殊的下垫面性质使朝阳站日间对流边界层发展更早,边界层高度更高,全天朝阳站边界层高度的变化在308—1391 m,大兴站在197—1302 m。 相似文献
3.
Remote Sensing Methods to Investigate Boundary-layer Structures relevant to Air Pollution in Cities 总被引：2，自引：0，他引：2
Simultaneous surface-based remote sensing with optical (Ceilometer) and acoustic (Sodar) methods allows the diurnal variation of the structure of the atmospheric boundary layer to be deduced with high temporal resolution. Primarily the convective boundary layer, the nocturnal stable surface layer, and the residual layer can be identified from the measured vertical profiles of aerosol concentration and thermal fluctuations. The ability of the two remote sensing techniques is shown in different examples from two different locations and two seasons. The impact on urban air quality assessment is addressed. 相似文献
4.
Aggeliki Dandou Maria Tombrou Klaus Schäfer Stefan Emeis Anna P. Protonotariou Elissavet Bossioli Nikolaos Soulakellis Peter Suppan 《Boundary-Layer Meteorology》2009,131(3):425-440
An attempt is made to correlate the mixing heights, derived from ceilometer and Sodar measurements, to those simulated by
different atmospheric boundary-layer parameterization schemes. The comparison is performed at two sites (one suburban and
one rural) close to Munich, Germany for two spring and two winter days. It is found that, under convective conditions, the
mixing height determined, by both Sodar and ceilometer, corresponds to the middle or the top of the entrainment zone, respectively,
as calculated from the eddy-viscosity profiles. Under stable conditions, the measured mixing height is related to the height
where eddy viscosities attain their minimum values (Sodar) or to the height of residual mechanical turbulence (ceilometer).
During a foehn case with weak turbulence, the measured mixing height from both Sodar and ceilometer is better inferred by
considering the eddy-viscosity profiles during daytime and the height of the low-level jet during nighttime. 相似文献
5.
大气边界层具备一个重要特性,即在边界层顶部,气溶胶浓度在垂直分布上存在显著突变。利用该特性,采用主动遥感装置经过窗口平滑去除噪点后数据,提出基于梯度法改进的大气边界层高度反演方法——窗口标准偏差法。基于激光云高仪后向散射廓线数据,利用该方法反演边界层高度,在边界层高度下大气气溶胶混合均匀时,反演结果较为理想。在此基础上,将窗口标准偏差法反演结果与逐步曲线拟合法反演结果进行比较。结果表明：两种方法具有较好的相关性,相关系数为0.94。两种方法产生差异的原因在于窗口标准偏差法不考虑夹卷层厚度而逐步曲线拟合法考虑夹卷层厚度。窗口标准偏差法可以降低高空背景光噪音对反演结果的影响。通过该方法反演出的边界层高度,在时间序列上具有连续性强的特点,反演结果更有利于研究大气边界层高度的时间变化趋势。 相似文献
6.
Christoph Münkel Noora Eresmaa Janne Räsänen Ari Karppinen 《Boundary-Layer Meteorology》2007,124(1):117-128
The Vaisala ceilometers CT25K and CL31 are eye-safe single lens lidar systems reporting attenuated backscatter profiles; they
often operate 24 h a day in fully automated, hands-off operation mode. These profiles can be used for more than just cloud-base
height determination. In dry weather situations, there is a fairly good correlation between the ceilometer near-range backscatter
and in situ PM10 concentration readings. The comparison of mixing height values based on soundings and on ceilometer backscattering
profiles indicates that ceilometers are suitable instruments for determining the convective mixing height. Its enhanced optics
and electronics enables the CL31 ceilometer to detect fine boundary-layer structures whose counterparts are seen in temperature
profiles. 相似文献
1