Bidirectional shaking table tests of a low-cost friction sliding system with flat-inclined surfaces     

Miguel B. Brito  Mitsuyoshi Akiyama  Yoshitaka Ichikawa  Hiroki Yamaguchi  Riki Honda  Naomitsu Ishigaki 《地震工程与结构动力学》2020,49(8):817-837

A novel low-cost friction sliding system for bidirectional excitation is developed to improve the seismic performance of reinforced concrete (RC) bridge piers. The sliding system is a spherical prototype developed by combining a central flat surface with an inclined spherical segment, characterized by stable oscillation and a large reduction in response accelerations on the flat surface. The inclined part provides a restoring force that limits the residual displacements of the system. Conventional steel and concrete are employed to construct a flat-inclined spherical surface atop an RC pier. The seismic forces are dissipated through the frictions generated during the sliding movements; hence, the seismic resilience of bridges can be ensured with a low-cost design solution. The proposed system is fabricated utilizing a mold created by a three-dimensional printer, which facilitates the use of conventional concrete to construct spherical shapes. The concrete surface is lubricated with a resin material to prevent abrasion from multiple input ground motions. To demonstrate the effectiveness of the system, bidirectional shaking table tests are conducted in the longitudinal and transverse directions of a scaled bridge model. The effect of the inclination angle and the flat surface size is investigated. The results demonstrate a large decrease in response acceleration when the system exhibits circular sliding displacement. Furthermore, the inclination angle that generates the smallest residual displacement is identified experimentally.  相似文献   

Coastal ridge constructive processes at a multi-decadal scale in Barreta Island (southern Portugal)     

Xabier Herrero  Susana Costas  Katerina Kombiadou 《地球表面变化过程与地形》2020,45(2):411-423

Multiple ridges across prograding coasts may display variable geometries, commonly expressed through varying elevations. Changes in ridge elevation have been traditionally related to the occurrence of fluctuating progradation rates, which might, in turn, be driven by shifting environmental conditions. Here, we explore the geometry and growth mechanisms of multiple ridges, generated at Barreta Island (Ria Formosa, southern Portugal), as a consequence of the rapid progradation of the island over the last 70 years, following the artificial fixation of the downdrift Faro-Olhão inlet with jetties in 1955. The variability in the morphology of these features was analysed in combination with available wind and wave data, in order to better distinguish growth mechanisms and understand the main parameters determining the final geometry of the observed ridges. The results suggest that (1) most of the identified ridges fall in the beach ridge classification, as they have been mostly built by marine processes, and (2) the parameters derived from, or closely related to wave climate variability (e.g. progradation rates, storm occurrence) can jointly explain most of the observed morphological changes, while aeolian processes played a secondary role. Indeed, ridge geometry appears mainly controlled by progradation rates, with higher ridges associated with lower progradation rates. Progradation rate, in turn, is mostly related to longshore wave power, storminess, and the occurrence storm groups. Yet, the final configuration of ridges can also be affected by runup levels and onshore winds. Therefore, establishing the relation between ridge geometry and wave climate is not a straightforward task, because of the complex processes and interactions that control coastal morphodynamics. © 2019 John Wiley & Sons, Ltd.  相似文献   

敦煌-格尔木铁路沿线风动力环境特征     

鱼燕萍  张克存  安志山  张余 《中国沙漠》2020,40(1):41-48

敦煌-格尔木铁路沿线地形复杂、起沙因素多变、沙源丰富，沙害问题日益严重。目前对其风沙活动规律还未有研究，不利于防沙工作的开展。为此，通过对自北向南的5个观测点（S1、S2、S3、S4、S5）风速和风向的观测、计算和分析，利用平均风速、起沙风况及输沙势对敦格铁路沿线的风动力环境特征进行研究。结果表明：S5、S4和S3的风况对铁路风沙灾害防治意义较大。S5年平均风速、起沙风频率和输沙势最大，春季风沙活动最为强烈，且风向单一、风力强劲，风沙运动方向基本与铁路垂直，沙粒易在铁路附近堆积。S4夏季风沙活动最为强烈；S3春季风沙活动最为强烈，且风向单一，S4和S3的风沙运动方向与铁路夹角小于90°，附近沙源广阔，铁路易受风沙侵蚀，阻碍交通运营。  相似文献   

刘公岛海洋牧场底层海水溶解氧浓度的变化特征     

李兆钦  李欣  孙利元  刘子洲  顾艳镇  翟方国  李培良 《海洋与湖沼》2019,50(1):86-99

由于缺乏长期观测资料,前人对山东半岛邻近海域海水溶解氧的时间变化和空间分布特征的研究较少。本文基于威海刘公岛海洋牧场于2016年7月20日至2017年3月14日期间,利用生态环境实时在线观测系统获得的底层海水的温度、盐度、水深、溶解氧数据,分析了该牧场海水溶解氧浓度的时间变化特征及其影响因素,并探讨了低氧灾害发生的可能性。结果表明在观测期间,该牧场海水溶解氧浓度以季节变化为主,冬季最大、夏季最小,其中2月份平均值最高,约为10.86mg/L,8月份平均值最低,约为5.91mg/L。同时海水溶解氧浓度也存在显著的小时变化和日变化,且变化幅度于8月份最大、3月份最小。影响海水溶解氧浓度变化的主要因素是海水温度,溶解氧浓度随着温度的季节性变化而变化。夏季,水体分层会使溶解氧浓度发生大幅度的降低,大风过程对于溶解氧浓度也有一定的影响,通过打破夏季的季节性温跃层使水体发生垂向混合从而为海底提供氧气,但大风过程之后的几天会出现溶解氧浓度降低的现象。本次研究发现刘公岛海洋牧场在观测期间不存在低氧现象。  相似文献   

深厚软土场地基岩地震动反演——以天津波为例          下载免费PDF全文

梁建文  张萍  何颖 《世界地震工程》2020,(3):001-11

根据天津波地表加速度记录和相应实测场地钻孔资料，采用等效线性化方法模拟土体非线性，进行了深厚软土场地基岩地震动反演，研究了频率截断对深厚软土场地基岩地震动反演的影响，为天津波地表加速度记录提供了相应的基岩地震动输入。研究表明:不同截断频率情况下，反演得到的基岩地震动峰值和反应谱曲线形状均相差悬殊，但反演后再正演所得到的地面运动与原地表记录相比，加速度时程曲线形状和峰值大小、反应谱曲线形状和峰值大小均非常接近；可根据工程需要对地表加速度记录进行不同频率的截断，反演得到所需强度的基岩地震动。  相似文献   

中国东部层积云发展过程中云微物理特征的演变   总被引：1，自引：0，他引：1       下载免费PDF全文

李思聪  李昀英  孙国荣  宋文婷 《地球物理学报》2019,62(12):4513-4526

基于2007—2010年的CloudSat卫星观测数据,以云层液态水路径为指标将层积云的发展过程划分为五个阶段,对比研究了中国东部降水与非降水层积云发展过程中云微物理特征和云微物理机制的演变,并分析了其海陆差异.研究表明:非降水层积云中,云滴增长主要通过凝结过程完成,但云滴的凝结增长有限,难以形成降水,在非降水层积云发展的旺盛阶段,云层中上部云滴发生较弱的碰并过程.降水层积云中云滴碰并增长活跃,当云层液态水路径小于500 g·m~(-2)时,云滴在从云顶下落至云底的过程中持续碰并,并在云底附近出现云水向雨水的转化;当降水层积云液态水路径超过500 g·m~(-2)时,云滴碰并增长主要发生在云层上部,在云层中部,云液态水含量、液态粒子数浓度和液态粒子有效半径达到最大,云水向雨水的转化最为活跃.层积云微物理特征的海陆差异主要是由海陆上空气溶胶浓度和云中上升气流强度不同导致的.在非降水层积云中下部,陆地丰富的气溶胶为云滴凝结增长提供了充足的云凝结核,因而云微物理量的量值在陆地上空更大,而在云层中上部,云滴凝结增长达到极限,海洋充足的水汽输送使云微物理量的量值在海洋上空更大.当降水层积云液态水路径大于500 g·m~(-2)时,陆地层积云中更强的上升气流使大量云滴在云层中上部累积滞留,云滴碰并增长活跃,云层中上部云微物理量的量值在陆地上空更大.  相似文献   

Experimental investigation on a cabin-suspended catamaran in terms of motion reduction and wave energy harvesting by means of a semi-active motion control system     

《Applied Ocean Research》2019

A novel concept catamaran equipped with a suspended cabin, named Wave Harmonizer Type 4 (WHzer-4), is proposed and evaluated. The mass-spring-mass system is constructed by mounting four sets of suspensions in-between the cabin and the twin-hull. Two sets of dual motor/generators (M/Gs) are attached on the center beam of the cabin's deck fore and aft. Each shaft-end of the dual M/Gs is connected to the twin-hull through a rack-pinion gear unit. In this way the vertical relative motion between the cabin and the twin-hull can be transferred into the rotational motion of the M/Gs, and vice versa. A semi-active motion control system, which contains a proportional-integral (PI) controller, is designed and applied to each of the dual M/Gs for the aim of absorbing wave energy under the condition of suppressing the local vertical velocity of the cabin as much as possible. A 1/5 scale model ship with a length of 1.6 m is built, and a forced-oscillation bench test is implemented to validate the performance of the control system. Then, a series of towing tank tests is carried out in regular head waves. The heave and pitch responses of the cabin, those of the twin-hull and the corresponding wave energy capture width ratio (CWR) at five control scenarios and two reference scenarios are investigated. Discussion on the results of the tank test shows that the motion reduction of the cabin and the wave energy harvesting can be achieved simultaneously at a few wave conditions. However, at other conditions, although noticeable amount of wave energy is harvested, motion reduction of the heave and pitch of the cabin could not be obtained at the same time. It is suggested that varying the gain settings of the PI controllers according to the location of the controllers may improve the effectiveness of the proposed control system.  相似文献   

Effect of wave nonlinearity on fatigue damage and extreme responses of a semi-submersible floating wind turbine     

《Applied Ocean Research》2019

Floating wind turbine has been the highlight in offshore wind industry lately. There has been great effort on developing highly sophisticated numerical model to better understand its hydrodynamic behaviour. A engineering-practical method to study the nonlinear wave effects on floating wind turbine has been recently developed. Based on the method established, the focus of this paper is to quantify the wave nonlinearity effect due to nonlinear wave kinematics by comparing the structural responses of floating wind turbine when exposed to irregular linear Airy wave and fully nonlinear wave. Critical responses and fatigue damage are studied in operational conditions and short-term extreme values are predicted in extreme conditions respectively. In the operational condition, wind effects are dominating the mean value and standard deviation of most responses except floater heave motion. The fatigue damage at the tower base is dominated by wind effects. The fatigue damage for the mooring line is more influenced by wind effects for conditions with small wave and wave effects for conditions with large wave. The wave nonlinearity effect becomes significant for surge and mooring line tension for large waves while floater heave, pitch motion, tower base bending moment and pontoon axial force are less sensitive to the nonlinear wave effect. In the extreme condition, linear wave theory underestimates wave elevation, floater surge motion and mooring line tension compared with fully nonlinear wave theory while quite close results are predicted for other responses.  相似文献   

Drainage conditions around monopiles in sand     

《Applied Ocean Research》2019

Large diameter monopiles are typical foundation solutions for offshore wind turbines. In design of the monopile foundations in sand, it is necessary to understand the drainage conditions of the foundation soil under the design loading conditions as the soil performance (strength and stiffness) is highly dependent on the drainage conditions. This paper presents a numerical investigation into this issue, with a purpose to develop a simple design criterion for assessing the soil drainage conditions around a monopile in sand. It is found that for typical monopile foundations in sand, the drainage condition during a single load cycle is generally expected to be undrained. However, the current state-of-practice uses p-y springs derived for drained soil responses for monopile design. The impact of this discrepancy on monopile foundation design was evaluated and found to be insignificant due to the relatively low level of loading as compared to the capacity of the soil.  相似文献   

多能互补海洋能集成发电技术研究综述     

王世明  李泽宇  于涛  马晨倍 《海洋通报》2019,38(3)

介绍了国内外基于风能、太阳能、波浪能和潮流能等海上可再生能源进行多能互补集成发电的研究发展情况,从不同技术研究侧重点、不同装置机理差异性和多能互补集成发电方式等方面进行了概括和综述,对已有设备和理论研究等进行了对比,评述了目前海洋多能互补集成发电技术研究中存在的主要问题以及未来的研究发展趋势,指出未来海洋能源集成发电需在离岸化、新材料、大型化和阵列布局等方面进行技术研究和攻关。  相似文献