大地水准面高的计算及其在海底地形反演中的应用     

范雕  李姗姗  苏明晓  孟书宇  邢志斌  张驰  冯进凯 《海洋技术学报》2019,38(5)

为充分挖掘海洋重力数据在反演海底地形中的应用潜力,尝试探索利用大地水准面高反演海底地形的技术途径,并以夏威夷—皇帝海山链拐点所在海区作为反演试验区进行验证。首先采用Belikov列推法计算伴随(缔和)勒让德函数,利用EIGEN-6C4地球重力场模型解算获取了分辨率为1'的大地水准面高格网数值模型;然后通过综合分析反演比例函数和转换函数特点、研究海区大地水准面高与海底地形的相干特性以及大地水准面高本身尺度特征,获得了利用大地水准面高反演海底地形的频段范围;最终以试验海区大地水准面高为数据输入,构建了相应的海底地形模型(BNT模型),并与ETOPO1等海深模型进行比对分析。试验结果表明:BNT模型检核差值在一倍均方差范围检核点数量占比70.60%,相比正态分布更加集中;BNT模型检核精度低于ETOPO1等海深模型;海深模型检核精度随着水深增加不断提升,水深小于1 000 m时,海深模型相对误差出现较大发散现象;计算海域ETOPO1模型精度最高,GEBCO模型和DTU10模型检核精度相当。  相似文献   

利用卫星遥感海面温度、高度联合反演南海北部三维温度场     

汤博  侯一筠  殷玉齐  胡珀 《海洋科学》2019,43(11):1-10

利用历史观测得到的温度剖面数据,通过严格筛选和插值,建立了南海北部的气候态垂向温度剖面。随后,利用回归统计分析的方法构建了海面温度异常(SSTA)、海面高度异常(SSHA)联合扩展温度剖面的经验回归模型,并采用卫星遥感得到的SST和SSH数据扩展了南海北部的三维海洋温度场,其时间分辨率为天,空间分辨率为0.25°×0.25°。通过与观测数据的对比研究,扩展得到的温度场可以较为准确地反映南海北部温度剖面的结构特征,并且能有效地体现出一些中尺度变化过程。结果表明,本研究反演得到的三维温度扩展场是较为可靠的,它可以作为海洋数值模型的初始场,实现现场观测数据和卫星遥感数据的互补,有助于更好地分析南海北部温度场的三维结构及变化特征。  相似文献   

海上风电升压站平台高程确定标准的合理性研究     

潘晓春 《海洋技术学报》2019,38(6):83-88

为保证海上风电升压电站建设的经济合理与安全可靠,合理确定海上风电升压电站平台高程十分必要。文中从波浪与潮位的遭遇组合、最大波高取值与现行相关标准的比较、最大波峰高度计算的合理性等方面,全面分析了确定海上风电升压站平台高程各组成项取值标准的合理性,研究认为现行标准明显偏高。建议海上升压站平台底部高程按"100年一遇极端高水位+重现期50年波列累积频率1%的最大波峰高度+安全超高"确定。结合工程实例计算分析,按本文建议可使海上升压站平台高程明显降低,从而节省工程造价,还可减轻升压站工程对周边风机的遮蔽影响,以达到多发电量的效果。  相似文献   

基于ROMS和4DVAR的沿轨与网格化SSH数据同化效果评价   总被引：1，自引：1，他引：0  

周超杰  丁效华  张杰  杨俊刚  马强 《海洋学报(英文版)》2018,37(9):50-58

Remote sensing products are significant in the data assimilation of an ocean model. Considering the resolution and space coverage of different remote sensing data, two types of sea surface height(SSH) product are employed in the assimilation, including the gridded products from AVISO and the original along-track observations used in the generation. To explore their impact on the assimilation results, an experiment focus on the South China Sea(SCS) is conducted based on the Regional Ocean Modeling System(ROMS) and the four-dimensional variational data assimilation(4 DVAR) technology. The comparison with EN4 data set and Argo profile indicates that, the along-track SSH assimilation result presents to be more accurate than the gridded SSH assimilation, because some noises may have been introduced in the merging process. Moreover, the mesoscale eddy detection capability of the assimilation results is analyzed by a vector geometry–based algorithm. It is verified that, the assimilation of the gridded SSH shows superiority in describing the eddy's characteristics, since the complete structure of the ocean surface has been reconstructed by the original data merging.  相似文献   

Analytical and empirical models for predicting the drift capacity of modern unreinforced masonry walls     

Bastian Valentin Wilding  Katrin Beyer 《地震工程与结构动力学》2018,47(10):2012-2031

Displacement‐based seismic assessment of buildings containing unreinforced masonry (URM) walls requires as input, among others, estimates of the in‐plane drift capacity at the considered limit states. Current codes assess the drift capacity of URM walls by means of empirical models with most codes relating the drift capacity to the failure mode and wall slenderness. Comparisons with experimental results show that such relationships result in large scatter and usually do not provide satisfactory predictions. The objective of this paper is to determine trends in drift capacities of modern URM walls from 61 experimental tests and to investigate whether analytical models could lead to more reliable estimates of the displacement capacity than the currently used empirical models. A recently developed analytical model for the prediction of the ultimate drift capacity for both shear and flexure controlled URM walls is introduced and simplified into an equation that is suitable for code implementation. The approach follows the idea of plastic hinge models for reinforced concrete or steel structures. It explicitly considers the influence of crushing due to flexural or shear failure in URM walls and takes into account the effect of kinematic and static boundary conditions on the drift capacity. Finally, the performance of the analytical model is benchmarked against the test data and other empirical formulations. It shows that it yields significantly better estimates than empirical models in current codes. The paper concludes with an investigation of the sensitivity of the ultimate drift capacity to the wall geometry, static, and kinematic boundary conditions.  相似文献   

2013年岷县—漳县M_S6.6地震前水氡浓度的临界慢化现象研究     

王熠熙  李赫  王博  杨朋涛  王俊  向阳  王喜龙  李悦 《地震》2018,38(1):128-138

基于临界慢化理论, 以2013年7月22日甘肃岷县—漳县M_S6.6地震前南北构造带及邻区水氡浓度观测资料为例, 逐一计算了表征临界慢化现象的自相关系数和方差。 研究结果表明, 2013年岷县—漳县M_S6.6地震前, 10个台点水氡浓度资料表现出较明显的临界慢化现象, 且出现慢化现象的观测点空间分布具有一定丛集性, 慢化持续时间呈现出由南向北迁移的特征。 综合分析认为, 临界慢化方法可以有效识别水氡资料蕴含的慢化信息, 这些早期异常信号对判定前兆异常所处阶段以及深入理解前兆资料变化的物理内涵具有重要的科学意义。  相似文献   

植被覆盖、放牧和季节对牧草种类组成和生物量的影响:以埃塞俄比亚南部Yabello牧场为例     

Yeneayehu FENETAHUN  徐新文  尤源  王永东 《资源与生态学报(英文版)》2020,11(2):159-170

Yabello牧场是埃塞俄比亚博拉纳的一个半干旱地区的牧场,目前面临着草场退化的严重挑战。植被覆盖的变化、过度放牧和季节性变化极大地影响了Yabello牧场的牧草组成和生物量。本文评估了植被覆盖、放牧和季节对Yabello牧场的牧草组成和生物量的影响。首先采用1 m×1 m的随机样方进行实验,根据植被覆盖类型和放牧变化选择样点,并对季节影响进行评估。使用SAS统计软件和MicrosoftExcel分析牧草组成、牧草高度和质量数据。本研究总共记录了26种草种,其中Chloris roxburghiana, Chrysopogon aucheri和Chrysopogon aucheri草种均表现出最高的平均单种覆盖高度和生物量产量。因此,建议将这些草种用于研究区域退化草地的恢复。研究结果还表明,植被覆盖类型、放牧和季节变化是决定牧草种类组成、牧草高度和生物量产量的关键因素。最后,研究结论还认为控制灌木丛植被并平衡放牧水平的可持续管理对于该地区的可持续牧草生产和生物多样性保护至关重要。  相似文献   

Moving from plot-based to hillslope-scale assessments of savanna vegetation structure with long-range terrestrial laser scanning (LR-TLS)     

《International Journal of Applied Earth Observation and Geoinformation》2020

Reliable quantification of savanna vegetation structure is critical for accurate carbon accounting and biodiversity assessment under changing climate and land-use conditions. Inventories of fine-scale vegetation structural attributes are typically conducted from field-based plots or transects, while large-area monitoring relies on a combination of airborne and satellite remote sensing. Both of these approaches have their strengths and limitations, but terrestrial laser scanning (TLS) has emerged as the benchmark for vegetation structural parameterization – recording and quantifying 3D structural detail that is not possible from manual field-based or airborne/spaceborne methods. However, traditional TLS approaches suffer from similar spatial constraints as field-based inventories. Given their small areal coverage, standard TLS plots may fail to capture the heterogeneity of landscapes in which they are embedded. Here we test the potential of long-range (>2000 m) terrestrial laser scanning (LR-TLS) to provide rapid and robust assessment of savanna vegetation 3D structure at hillslope scales. We used LR-TLS to sample entire savanna hillslopes from topographic vantage points and collected coincident plot-scale (1 ha) TLS scans at increasing distances from the LR-TLS station. We merged multiple TLS scans at the plot scale to provide the reference structure, and evaluated how 3D metrics derived from LR-TLS deviated from this baseline with increasing distance. Our results show that despite diluted point density and increased beam divergence with distance, LR-TLS can reliably characterize tree height (RMSE = 0.25–1.45 m) and canopy cover (RMSE = 5.67–15.91%) at distances of up to 500 m in open savanna woodlands. When aggregated to the same sampling grain as leading spaceborne vegetation products (10–30 m), our findings show potential for LR-TLS to play a key role in constraining satellite-based structural estimates in savannas over larger areas than traditional TLS sampling can provide.  相似文献   

精密单点定位结合EGM2008模型在新疆某河地质断面测量中的应用     

李玉平 《测绘与空间地理信息》2020,(1):192-195

针对新疆某河地质断面测量范围大、测区通行困难、测量部位分散、传统控制测量方法工作量大且效率低的问题,在测区每条断面上布设断面基点作为控制点并用GNSS接收机静态观测(无需同步),选用武汉大学开发的Trip2.0软件加载事后精密星历和精密钟差等信息解算静态观测数据得到ITRF框架下的三维坐标,然后采用TBC软件加载EGM2008超高阶地球重力场模型点校正得到控制点的国家平面坐标和正常高。结果表明,Trip2.0软件计算的三维点位中误差最大为0.066 m,点校正坐标转换残差与已知点差值均满足限差要求;该方法平面控制测量工作量比传统方案减少46%,五等水准测量比传统方案减少98%,节约工期约56%。实践表明,采用该方法可快速地实现测区面积大、测点分散、控制点稀少区域的平面及高程控制测量。  相似文献   

二次曲面与最小二乘配置的组合模型在GPS高程异常拟合中的应用     

吕建伟  张志华  张新秀  刘祖昱 《测绘通报》2020,(5):127

在工程实践应用中，为了有效利用GPS高程数据，减少对传统水准测量的依赖，提高GPS高程异常的拟合精度便显得十分重要。为此，本文在介绍二次曲面拟合和最小二乘配置拟合基本原理分析、算法过程推导的基础上，提出了一种新的高程异常拟合方法。首先在二次曲面拟合的基础上，计算得到原始观测数据与拟合数据之间的残差序列，然后采用最小二乘配置模型对包括二次曲面拟合模型误差的综合误差进行优化减弱，最后得到新的高程异常。通过实例，将二次曲面拟合法，最小二乘配置法与文中提出的新方法进行比较分析。结果表明：新的组合方法的拟合预测精度要明显优于最小二乘配置及二次曲面拟合。  相似文献