Long-term hydrology and aquatic biogeochemistry data from H. J. Andrews Experimental Forest,Cascade Mountains,Oregon     

Sherri L. Johnson  Don Henshaw  Greg Downing  Steve Wondzell  Mark Schulze  Adam Kennedy  Greg Cohn  Stephanie A. Schmidt  Julia A. Jones 《水文研究》2021,35(5):e14187

The H. J. Andrews Experimental Forest (HJA) encompasses the 6400 ha Lookout Creek watershed in western Oregon, USA. Hydrologic, chemistry and precipitation data have been collected, curated, and archived for up to 70 years. The HJA was established in 1948 to study the effects of harvest of old-growth conifer forest and logging-road construction on water quality, quantity and vegetation succession. Over time, research questions have expanded to include terrestrial and aquatic species, communities and ecosystem dynamics. There are nine small experimental watersheds and 10 gaging stations in the HJA, including both reference and experimentally treated watersheds. Gaged watershed areas range from 8.5 to 6242 ha. All gaging stations record stage height, water conductivity, water temperature and above-stream air temperature. At nine of the gage sites, flow-proportional water samples are collected and composited over 3-week intervals for chemical analysis. Analysis of stream and precipitation chemistry began in 1968. Analytes include dissolved and particulate species of nitrogen and phosphorus, dissolved organic carbon, pH, specific conductance, suspended sediment, alkalinity, and major cations and anions. Supporting climate measurements began in the 1950s in association with the first small watershed experiments. Over time, and following the initiation of the Long Term Ecological Research (LTER) grant in 1980, infrastructure expanded to include a set of benchmark and secondary meteorological stations located in clearings spanning the elevation range within the Lookout Creek watershed, as well as a large number of forest understory temperature stations. Extensive metadata on sensor configurations, changes in methods over time, sensor accuracy and precision, and data quality control flags are associated with the HJA data.  相似文献   

Bidirectional shaking table tests of a low-cost friction sliding system with flat-inclined surfaces     

Miguel B. Brito  Mitsuyoshi Akiyama  Yoshitaka Ichikawa  Hiroki Yamaguchi  Riki Honda  Naomitsu Ishigaki 《地震工程与结构动力学》2020,49(8):817-837

A novel low-cost friction sliding system for bidirectional excitation is developed to improve the seismic performance of reinforced concrete (RC) bridge piers. The sliding system is a spherical prototype developed by combining a central flat surface with an inclined spherical segment, characterized by stable oscillation and a large reduction in response accelerations on the flat surface. The inclined part provides a restoring force that limits the residual displacements of the system. Conventional steel and concrete are employed to construct a flat-inclined spherical surface atop an RC pier. The seismic forces are dissipated through the frictions generated during the sliding movements; hence, the seismic resilience of bridges can be ensured with a low-cost design solution. The proposed system is fabricated utilizing a mold created by a three-dimensional printer, which facilitates the use of conventional concrete to construct spherical shapes. The concrete surface is lubricated with a resin material to prevent abrasion from multiple input ground motions. To demonstrate the effectiveness of the system, bidirectional shaking table tests are conducted in the longitudinal and transverse directions of a scaled bridge model. The effect of the inclination angle and the flat surface size is investigated. The results demonstrate a large decrease in response acceleration when the system exhibits circular sliding displacement. Furthermore, the inclination angle that generates the smallest residual displacement is identified experimentally.  相似文献   

Early Identification of the Jiangdingya Landslide of Zhouqu Based on SBAS-InSAR Technology   总被引：1，自引：1，他引：0  

YU Haihu  CAI Guolin  GAN Quan  SHEN Dong 《中国地震研究》2020,34(4):510-522

SBAS-InSAR technology is characterized by the advantages of reducing the influence of terrain-simulation error, time-space decorrelation, atmospheric error, thereby improving the reliability of surface-deformation monitoring. This paper studies the early landslide identification method based on SBAS-InSAR technology. Selecting the Jiangdingya landslide area in Zhouqu County, Gansu Province as the research area, 84 ascending-orbit Sentinel-1A SAR images from 2015 to 2019 are collected. In addition, using SBAS-InSAR technology, the rate and time-series results of surface deformation of the landslide area in Jiangdingya during this period are extracted, and potential landslides are identified. The results show that the early landslide identification method based on SBAS-InSAR technology is highly feasible and is a better tool for identifying potential landslides in large areas.  相似文献   

电磁卫星地面对比观测原型系统地电场观测资料特征分析          下载免费PDF全文

周卫东  牛延平  田野  苏小芸  陈丽君 《地震工程学报》2020,42(6):1517-1522

通过对电磁监测试验卫星地面对比观测原型系统中古丰、寺滩和坪城地电场观测数据特征研究，结果表明：（1）3个台站的地电场观测数据均具有较为明显的正常日变化形态；（2）在磁暴发生期间，地电场各测向均记录到了同步的地电暴变化，其最大变幅均明显高于正常日变；（3）寺滩地电场记录到临震前的数据异常现象，在时间和空间上都与地震事件吻合较好。  相似文献   

The potential of Pléiades images with high angle of incidence for reconstructing the coastal cliff face in Normandy (France)     

《International Journal of Applied Earth Observation and Geoinformation》2020

To monitor chalk cliff face along the Normandy coast (NW France) which is prone to erosion, we tested the potential of cliff face 3D reconstruction using pairs of images with high angle of incidence at different dates from the agile Pléiades satellites. The verticality aspect of the cliff face brings difficulties in the 3D reconstruction process. Furthermore, the studied area is challenging mainly because the cliff face is north-oriented (shadow). Pléiades images were acquired over several days (multi-date stereoscopic method) with requested incidence angles until 40°. 3D reconstructions of the cliff face were compared using two software: ASP® and ERDAS IMAGINE®. Our results are twofold. Firstly, despite ASP® provides denser point clouds than ERDAS IMAGINE® (an average of 1.60 points/m² from 40° incidence angle stereoscopic pairs on the whole cliff face of Varengeville-sur-Mer against 0.77 points/m² respectively), ERDAS IMAGINE® provides more reliable point clouds than ASP® (precision assessment on the Varengeville-sur-Mer cliff face of 0.31 m ± 2.53 and 0.39 m ± 4.24 respectively), with a better spatial distribution over the cliff face and a better representation of the cliff face shape. Secondly, the quality of 3D reconstructions depends mostly on the amount of noise from raw images and on the shadow intensity on the cliff face (radiometric quality of images).  相似文献   

Regional soil organic carbon prediction model based on a discrete wavelet analysis of hyperspectral satellite data     

《International Journal of Applied Earth Observation and Geoinformation》2020

Most studies have the achieved rapid and accurate determination of soil organic carbon (SOC) using laboratory spectroscopy; however, it remains difficult to map the spatial distribution of SOC. To predict and map SOC at a regional scale, we obtained fourteen hyperspectral images from the Gaofen-5 (GF-5) satellite and decomposed and reconstructed the original reflectance (OR) and the first derivative reflectance (FDR) using discrete wavelet transform (DWT) at different scales. At these different scales, as inputs, we selected the 3 optimal bands with the highest weight coefficient using principal component analysis and chose the normalized difference index (NDI), ratio index (RI) and difference index (DI) with the strongest correlation with the SOC content using a contour map method. These inputs were then used to build regional-scale SOC prediction models using random forest (RF), support vector machine (SVM) and back-propagation neural network (BPNN) algorithms. The results indicated that: 1) at a low decomposition scale, DWT can effectively eliminate the noise in satellite hyperspectral data, and the FDR combined with DWT can improve the SOC prediction accuracy significantly; 2) the method of selecting inputs using principal component analysis and a contour map can eliminate the redundancy of hyperspectral data while retaining the physical meaning of the inputs. For the model with the highest prediction accuracy, the inputs were all derived from the wavelength range of SOC variations; 3) the differences in prediction accuracy among the different prediction models are small; and 4) the SOC prediction accuracy using hyperspectral satellite data is greatly improved compared with that of previous SOC prediction studies using multispectral satellite data. This study provides a highly robust and accurate method for predicting and mapping regional SOC contents.  相似文献   

结合BM3D和多级非线性加权平均中值滤波的遥感影像混合噪声去噪方法     

任超  李现广  邓开元  潘亚龙  朱子林  张志刚  施显健 《测绘通报》2020,(1):89-93

提出了一种基于三维块匹配（BM3D）和多级非线性加权平均中值滤波的遥感影像混合噪声去噪方法，使用coief3小波和sym2小波替换传统三维块匹配算法中的bior1.5和hear参数，将三维块匹配算法和多级非线性加权平均中值滤波相结合以提高算法对混合噪声的去噪能力。进行一个仿真对比试验和一个真实遥感影像去噪试验，试验表明，本文提出的方法在遥感影像混合噪声去噪方面效果要优于传统混合噪声去噪方法。  相似文献   

面向数字孪生城市的智能化全息测绘   总被引：2，自引：0，他引：2  

顾建祥  杨必胜  董震  杨常红 《测绘通报》2020,(6):134-140

以大数据、物联网、人工智能、虚拟现实、云计算、智能驾驶等新技术为代表的信息化浪潮席卷全球，数字世界与物理世界正形成两大平行发展、相互作用的体系，数字孪生技术应运而生。随着物联网技术（IOT）的发展，数字孪生的理念被引入到智慧城市建设中来，深刻影响着城市规划、建设与治理。笔者所在单位面向数字孪生城市和自然资源统一监管对测绘地理信息的新需求，在全国开创性地开展了面向数字孪生城市的智能化全息测绘试点工作。本文结合上海市智能化全息测绘试点工作，从数字孪生城市、数字孪生城市对地理信息的新需求、智能化全息测绘关键技术及测绘成果等方面展开了论述，重点介绍了智能化全息测绘的技术体系和产品体系，以及在社会各领域的应用成果。  相似文献   

运用GD-PBIBD编码的矢量空间数据数字指纹算法     

陈金萍  张黎明  蒋美容  王昊 《测绘通报》2020,(8):81

针对矢量空间数据叛逆者追踪难及编码效率低的问题，本文提出了一种运用GD-PBIBD码的指纹算法。首先运用GD-PBIBD构造指纹编码，将待嵌入指纹序列运用Logistic映射置乱，通过D-P算法提取矢量空间数据的特征点，对特征点实施DFT变换得到相位系数和幅度系数；然后运用QIM方法将指纹嵌入DFT变换域的幅度系数上；最后应用DFT逆变换得到含指纹的矢量空间数据。试验选取部分中国路网数据和某区域绿地数据，运用该算法嵌入指纹后，对其进行线性和非线性模拟攻击，成功提取指纹序列，利用汉明距离追踪出合谋者。该算法编码构造简单，在码长一定的情况下，较BIBD码可容纳更多的用户，效率高；算法抗单用户指纹攻击及多重攻击的稳健性较好，也能够抵抗多用户最小值和最大最小值攻击，追踪到所有叛逆者，可用于矢量空间数据版权保护，为矢量空间数据叛逆者追踪提供依据。  相似文献   

基于OSM的浮动车轨迹数据校正方法     

胡向勇  郭圆 《测绘通报》2020,(10):139

浮动车轨迹数据具有覆盖范围广、更新周期短、获取成本低等特点，对于地图的生产和更新具有重要意义，但是由于受到卫星信号被遮挡及多路径效应的影响，其精度普遍较低。本文采用一种基于OSM作为参考数据的方式对浮动车轨迹数据进行校正。首先通过一种分层时空地图匹配的方式将轨迹数据与OSM进行匹配；然后采用引力模型对数据进行校正；最后在武汉市出租车轨迹数据上进行了试验。结果表明，本文提出的数据校正方法可以有效地提高浮动车轨迹数据的精度。  相似文献