波纹钢管铅阻尼器耗能性能分析研究          下载免费PDF全文

周云  吴胜 《世界地震工程》2020,(4):103-111

提出一种波纹钢管铅阻尼器，介绍了其构造、工作机理、布置形式及特点，采用ABAQUS软件，建立钢管阻尼器、波纹钢管阻尼器和波纹钢管铅阻尼器有限元模型，对其应力分布，传力路径和滞回性能进行模拟分析。结果表明:波纹钢管铅阻尼器耗能减震机理明确，工作性能和耗能性能稳定，滞回曲线饱满以及耗能能力强，具有良好的变形和延性，极限变形大；波纹钢管铅阻尼器通过在波纹钢管内设置铅芯使初始刚度、承载能力和耗能能力得到大幅度提高，既有效保持了波纹钢管的变形能力，又避免波纹钢管发生局部屈曲，使波纹钢管耗能能力得到充分发挥。波纹钢管铅阻尼器在1mm小位移下就可以进入耗能，而且很快进入稳定耗能状态，等效阻尼比稳定在0.3~0.4之间。  相似文献   

Turbulence Diffusion and Energy Spectrum Analysis of Large-scale Current Sheets in Flares     

《Chinese Astronomy and Astrophysics》2021,45(4):470-493

Magnetic reconnection (MR) is one of the most important physical processes for many dynamical phenomena in the universe. Magnetohydrodynamical (MHD) simulation is an effective way to study the MR process and the physical pictures related to the MR. With different parameter setups, we investigate the influences of the Magnetic Reynolds number and spatial resolution on the reconnection rate, numerical dissipation, and energy spectrum distribution in the MHD simulation. We have found that the magnetic Reynolds number $R_m$ has definite impact on the reconnection rate and energy spectrum distribution. The characteristic time for entering into the non-linear phase will be earlier as the Reynolds number increases. When it comes to the tearing phase, the reconnection rate will increase rapidly. On the other hand, the magnetic Reynolds number affects significantly the Kolmogorov microscopic scale $l_{\mathit{ko}}$, which becomes smaller as $R_m$ increases. An extra dissipation is defined as the combined effect of the numerical diffusion and turbulence dissipation. It is shown that the extra dissipation is dominated by the numerical diffusion before the tearing mode instability takes place. After the instability develops, the extra dissipation rises vastly, which indicates that turbulence caused by the instability can enhance the diffusion obviously. Furthermore, the energy spectrum analysis indicates that $l_{\mathit{ko}}$ of the large-scale current sheet may appear at a macroscopic MHD scale very possibly.  相似文献   

村镇滑移隔震建筑瞬时摩擦耗能的参数敏感性分析          下载免费PDF全文

孙敏  王锦燕  孙光林 《世界地震工程》2020,(3):100-108

给出了村镇滑移隔震建筑瞬时摩擦耗能的概念，并以此概念为响应指标。通过极差大小的对比，分析了该响应指标对刚度比、第二阶段刚度系数、隔震层屈服位移、隔震层摩擦系数、系统质量比和上部结构自振周期六个参数变化的敏感程度，阐述了上述系统参数对瞬时摩擦耗能这一响应指标的影响规律。研究表明:场地条件和地震动幅值大小对瞬时摩擦耗能均有显著影响；在所考虑的参数范围内，上部结构自振周期总是对瞬时摩擦耗能有较为显著的影响，摩擦系数对瞬时摩擦耗能的影响跟场地条件有关，Ⅰ类场地条件中摩擦系数对瞬时摩擦耗能影响不显著，而Ⅱ、Ⅲ和Ⅳ类场地条件中，摩擦系数对瞬时摩擦耗能的影响则非常显著；隔震层屈服位移、刚度比和第二阶段刚度系数总得来讲对瞬时摩擦耗能影响不显著，质量比对瞬时摩擦耗能影响居中。  相似文献   

Test and analysis of reinforced concrete (RC) precast shear wall assembled using steel shear key (SSK)     

Shao-Dong Shen  Peng Pan  Qi-Song Miao  Wen-Feng Li  Run-Hua Gong 《地震工程与结构动力学》2019,48(14):1595-1612

Reinforced concrete (RC) precast shear walls are extensively applied in practical engineering, owing to their fast construction speed. However, because of the transport conditions, RC precast shear walls have to be separated into small wall segments during the factory prefabrication procedure before being assembled on site. Typically, wet-type jointing methods are adopted to link the segments, which is time-consuming and results in unreliable post-pouring area strength. To overcome this problem, the novel scheme of the steel shear key (SSK) featuring steel shear panels and combined fillet and plug welding is proposed. Three RC precast shear wall specimens with different linking strength, termed as weakened SSK wall, standard SSK wall, and strengthened SSK wall, respectively, and an integrated shear wall specimen were designed. Quasi-static cyclic loading was applied to investigate the specimens' dynamic properties. The test results suggest the prefabricated wall segments equipped with SSKs showed reliable stiffness and bearing capacity and were improved in energy dissipation ability, compared with conventional shear walls. As the shear stiffness and number of equipped SSKs increased, the specimens exhibited higher strength, but their ductility and energy dissipation were slightly decreased. Most importantly, the standard SSK wall specimen could achieve satisfactory bearing capacity and deformability and is thus recommended for precast building structures. Finite element method (FEM) models were established to validate the test results, and parametric study analysis was conducted based on the coupling ratio of the SSK walls. Finally, an appropriate coupling ratio range is recommended for practical engineering applications.  相似文献   

新型扇形盘式消能器减震性能参数分析          下载免费PDF全文

杨琼  郭阳照  吴体  杨成 《地震工程学报》2018,40(4):643-651

提出了一种新型扇形盘式效能器(fanshaped disc-type energy dissipator,FDED),阐明了其原理、特点,导出其设计要点和设计理论,采用数值方法分析了FDED的减震性能,研究不同设计参数对FDED减震性能的影响。结果表明:FDED设计原理可行,减震机理明确,其转盘式的构造可起到有效的位移放大效果,使得消能器在小激励位移下发挥耗能作用;FDED具有明显的双线性恢复力特性和稳定的耗能性能,等效黏滞阻尼系数可达50%以上;阻尼件中橡胶硬度的改变对FDED初始刚度的影响不敏感,但对FDED屈服后刚度和等效黏滞阻尼系数的影响较为明显。随着橡胶硬度的增大,FDEDE的屈服后刚度上升,等效黏滞阻尼系数降低;保持阻尼层中橡胶层的总厚度不变,通过增减叠层钢板改变单层橡胶层的厚度对于调整FDED的减震性能影响不大;调整铅芯直径的大小主要影响FDED的屈服力和耗能性能。随着铅芯直径的增大,FDED的屈服力也增大,耗能能力逐渐提高。  相似文献   

海岸波浪多次破碎波能耗散模型   总被引：1，自引：0，他引：1  

闫圣  邹志利 《海洋学报》2020,42(9):30-37

在坡度很缓(接近或小于1∶100)的海岸，波浪在向海岸传播的过程中，可能经历多次破碎，而在两次波浪破碎之间将伴随着波浪恢复(波浪恢复到不破碎状态)。在现有海岸波高计算模型中，波浪破碎是通过波能耗散来模拟的，但所采用的波能耗散模型都不能自动考虑波浪出现多次破碎的过程，特别精确模拟这一过程中出现的波浪恢复。本文提出了解决这一问题的新的波能耗散模型，模型的建立是通过在Dally模型中重新建立稳定波能、饱和波高水深比和波能耗散系数，并引入了波浪恢复的判断条件实现的。该模型的波能耗散在波浪恢复区的值很小故能描述波浪恢复区的波浪运动。与实验结果的对比表明，新模型可以适合缓坡情况波浪多次破碎的波高模拟，而且对不同坡度的平坡和沙坝海岸(1∶100～1∶10)的破碎波模拟都可以给出与实验结果符合的结果，并且可以自动识别多次波浪破碎的存在和波浪恢复的发生。  相似文献   

北极薄冰-煎饼冰区域中不同重力波驱动形成海流的敏感性分析     

张雪妍  戴海瑨  赵军  殷何卿 《海洋学报(英文版)》2020,39(3):123-129

A coupled ocean-ice-wave model is used to study ice-edge jet and eddy genesis during surface gravity wave dissipation in a frazil-pancake ice zone. With observational data from the Beaufort Sea, possible wave dissipation processes are evaluated using sensitivity experiments. As wave energy dissipated, energy was transferred into ice floe through radiation stress. Later, energy was in turn transferred into current through ocean-ice interfacial stress. Since most of the wave energy is dissipated at the ice edge, ice-edge jets, which contained strong horizontal shear, appeared both in the ice zone and the ocean. Meanwhile, the wave propagation direction determines the velocity partition in the along-ice-edge and cross-ice-edge directions, which in turn determines the strength of the along-ice-edge jet and cross-ice-edge velocity. The momentum applied in the along-ice-edge(cross-ice-edge)direction increased(decreased) with larger incident angle, which is favorable condition for producing stronger mesoscale eddies, vice versa. The dissipation rate increases(decreases) with larger(smaller) wavenumber, which enhances(reduces) the jet strength and the strength of the mesoscale eddy. The strong along-ice-edge jet may extend to a deep layer(> 200 m). If the water depth is too shallow(e.g., 80 m), the jet may be largely dampened by bottom drag, and no visible mesoscale eddies are found. The results suggest that the bathymetry and incident wavenumber(magnitude and propagation direction) are important for wave-driven current and mesoscale eddy genesis.  相似文献   

Observations of Dynamic Turbulence in the Lower Stratosphere over Inner Mongolia Using a High-resolution Balloon Sensor Constant Temperature Anemometer     

Xiaoyu REN  Yi LIU  Zhaonan CAI  Yuli ZHANG 《大气科学进展》2022,39(3):519-528

We present characterizations of the dynamic turbulence in the lower stratosphere measured by a new balloon-based system designed for detecting finer scale dynamic turbulence. The balloon-based system included a constant temperature anemometer(CTA) operating at a sampling rate of 2 k Hz at an ascent speed of 5 m s^-1(corresponding to a vertical resolution of 2.5 mm), an industrial personal computer, batteries, sensors for ambient temperature and humidity, an A/D converter, and others. The system was successfully launched to 24 km altitude over Bayannur City, Inner Mongolia Province. Results show the spatial intermittence of the turbulence layers, with clear boundaries between turbulent and nonturbulent regions. This is the first time that the dynamic turbulence spectrum down to the viscous sub-range has been obtained throughout the lower stratosphere over China. With that, the energy dissipation rates of dynamic turbulence could be calculated with high precision. The profile of the dissipation rates varied from 7.37 × 10^-7 to 4.23 W kg^-1 and increased with altitude in the stratosphere.  相似文献   

GRAPES全球集合预报系统模式扰动随机动能补偿方案初步探究   总被引：10，自引：5，他引：5       下载免费PDF全文

彭飞  李晓莉  陈静  李红祺 《气象学报》2019,77(2):180-195

为了体现次网格尺度能量升尺度转换过程中存在的不确定性, 文中将随机动能补偿(Stochastic Kinetic Energy Backscatter, SKEB)方案应用于GRAPES(Global/Regional Assimilation and Prediction System)全球集合预报系统(GRAPES-GEPS), 以更好地表征模式误差并且增大集合离散度。使用的SKEB方案基于具有一定时、空相关特征的随机型以及由数值扩散导致的局地动能耗散率来构造随机流函数强迫。并根据流函数与水平风速旋转分量的关系, 将SKEB方案中的流函数强迫转化为适用于GRAPES全球模式的水平风速扰动。结果表明, SKEB方案的使用一方面能够提高GRAPES对大气动能谱的模拟能力; 另一方面能够改善GRAPES-GEPS的集合离散度与集合平均误差的关系, 增加了集合离散度, 并在一定程度上减小了集合平均误差, 尤其是在热带地区这种改进更为显著。而且该方案使得热带地区连续分级概率评分(CRPS评分)显著减小。就降水预报而言, 从Brier评分与相对作用特征面积(AROC, Area under the Relative Operating Characteristics)的结果来看, SKEB方案有助于改善中国地区小雨[0.1 mm, 10 mm)、中雨[10 mm, 25 mm)与大雨[25 mm, 50 mm)量级降水的概率预报技巧, 而对暴雨[50 mm, ∞)量级降水预报技巧影响很小(24 h降水量)。总体上, 模式扰动随机动能补偿方案提高了GRAPES-GEPS的概率预报技巧。   相似文献   

Effects of rainfall on oil droplet size and the dispersion of spilled oil with application to Douglas Channel,British Columbia,Canada     

Yongsheng Wu  Charles G. Hannah  Pramod Thupaki  Ruping Mo  Brent Law 《Marine pollution bulletin》2017,114(1):176-182

Raindrops falling on the sea surface produce turbulence. The present study examined the influence of rain-induced turbulence on oil droplet size and dispersion of oil spills in Douglas Channel in British Columbia, Canada using hourly atmospheric data in 2011–2013. We examined three types of oils: a light oil (Cold Lake Diluent - CLD), and two heavy oils (Cold Lake Blend - CLB and Access Western Blend - AWB). We found that the turbulent energy dissipation rate produced by rainfalls is comparable to what is produced by wind-induced wave breaking in our study area. With the use of chemical dispersants, our results indicate that a heavy rainfall (rain rate > 20 mm h^? 1) can produce the maximum droplet size of 300 μm for light oil and 1000 μm for heavy oils, and it can disperse the light oil with fraction of 22–45% and the heavy oils of 8–13%, respectively. Heavy rainfalls could be a factor for the fate of oil spills in Douglas Channel, especially for a spill of light oil and the use of chemical dispersants.  相似文献