柱顶层间隔震体系增量动力响应研究          下载免费PDF全文

袁梦醒  陈望  刘彦辉  谭平  金建敏 《地震工程学报》2020,42(4):872-880

针对悬臂柱顶有拉梁和无拉梁层间隔震体系的抗震性能问题,运用增量动力分析(IDA)方法进行弹塑性分析,模拟结构从弹性到弹塑性直至最后倒塌的全过程。通过调幅地震动得到相应的层间位移角及峰值加速度,分别绘制单条与多条IDA曲线分析拉梁对隔震结构动力响应的影响,研究两种结构的抗震性能。结果表明:在相同性能点,有拉梁和无拉梁对纤维铰弯矩值和曲率值基本无影响,而在不同性能点,纤维铰状态明显不同;两种体系从正常使用阶段到防止倒塌阶段所需的加速度峰值的差距慢慢增大;在极罕遇地震下,柱顶有拉梁层间隔震体系的下部结构抗震性能要高于柱顶无拉梁层间隔震体系。  相似文献   

敦煌-格尔木铁路沿线风动力环境特征     

鱼燕萍  张克存  安志山  张余 《中国沙漠》2020,40(1):41-48

敦煌-格尔木铁路沿线地形复杂、起沙因素多变、沙源丰富，沙害问题日益严重。目前对其风沙活动规律还未有研究，不利于防沙工作的开展。为此，通过对自北向南的5个观测点（S1、S2、S3、S4、S5）风速和风向的观测、计算和分析，利用平均风速、起沙风况及输沙势对敦格铁路沿线的风动力环境特征进行研究。结果表明：S5、S4和S3的风况对铁路风沙灾害防治意义较大。S5年平均风速、起沙风频率和输沙势最大，春季风沙活动最为强烈，且风向单一、风力强劲，风沙运动方向基本与铁路垂直，沙粒易在铁路附近堆积。S4夏季风沙活动最为强烈；S3春季风沙活动最为强烈，且风向单一，S4和S3的风沙运动方向与铁路夹角小于90°，附近沙源广阔，铁路易受风沙侵蚀，阻碍交通运营。  相似文献   

基于细分行业的安徽省创新型企业集聚研究     

白如山  胡森林  庄良  刘岩  刘恺恺  黄鹏娜 《世界地理研究》2020,29(6):1190-1201

创新型企业作为塑造创新地理格局的重要力量，其区位选择的外部特征及内在机理亟须予以系统化研究。基于对安徽省创新型企业的细分行业与空间建库，采用核密度估计和地理探测器等方法，对细分行业下的创新型企业空间集聚特征及影响因素进行研究。结果表明：（1）安徽省创新型企业类型以先进制造和自动化为主，并以生物与新医药、新材料、电子信息为辅；（2）创新型企业空间集聚的不均衡特征显著，呈现出“一核一带多节点”的集聚分布特征，且合肥、芜湖是两个重要集聚区；不同细分行业视角下创新型企业的空间分布形态各异，可归纳为点-轴式、极核式、双核式及多核分散式等4种空间组织形态。（3）创新型因子对于创新型企业的空间集聚最为重要，但传统型和政策型因子的重要性仍不容忽视。其中，产业基础、人力资本、创新投入是最核心的因素，但各行业创新型企业的影响因素作用力则表现出一定的异质性。  相似文献   

城镇化与生态环境耦合的动态模拟——研究进展与展望     

崔学刚  方创琳  刘海猛  刘晓菲  李咏红 《地理学报(英文版)》2020,30(2):333-352

Urbanization and eco-environment coupling is a research hotspot.Dynamic simulation of urbanization and eco-environment coupling needs to be improved because the processes of coupling are complex and statistical methods are limited.Systems science and cross-scale coupling allow us to define the coupled urbanization and eco-environment system as an open complex giant system with multiple feedback loops.We review the current state of dynamic simulation of urbanization and eco-environment coupling and find that:(1)The use of dynamic simulation is an increasing trend,the relevant theory is being developed,and modeling processes are being improved;(2)Dynamic simulation technology has become diversified,refined,intelligent and integrated;(3)Simulation is mainly performed for three aspects of the coupling,multiple regions and multiple elements,local coupling and telecoupling,and regional synergy.However,we also found some shortcomings:(1)Basic theories are inadequately developed and insufficiently integrated;(2)The methods of unifying systems and sharing data are behind the times;(3)Coupling relations and the dynamic characteristics of the main driving elements are not fully understood or completely identified.Additionally,simulation of telecoupling does not quantify parameters and is not systemically unified,and therefore cannot be used to represent spatial synergy.In the future,we must promote communication between research networks,technology integration and data sharing to identify the processes governing change in coupled relations and in the main driving elements in urban agglomerations.Finally,we must build decision support systems to plan and ensure regional sustainable urbanization.  相似文献   

顾及基准站坐标动态特性与稳定性的区域框架构建     

蒋光伟  王斌  王延伟  李康  孙洋洋 《地球物理学进展》2020,(1):8-15

基准站受构造运动与非线性因素的影响,如何构建高精度、现势性强的精细区域框架是位置服务与形变分析的的关键.笔者提出顾及基准站坐标动态特性与稳定性的区域框架构建方法.以我国西部与东部某城市的多年连续运行基准站数据为例进行试算比对,试验结果表明:该方法是可行的,较好地顾及了基准站的坐标特性与非线性影响,考虑了基准站的垂直运动规律,可构建高精度的区域基准,可发现区域基准的微动态变化.  相似文献   

土遗址全长黏结式锚固系统动力响应解析方法     

芦苇  赵冬  李东波  毛筱霏 《岩土力学》2020,41(4):1377-1387

以纵向宽大裂隙引起的夯土城墙遗址稳定问题为背景，建立危险土体?锚杆?稳定土体锚固系统简化力学模型。该模型将土体对锚杆的摩阻作用简化为一个线性弹簧和一个与速度相关的阻尼器的并联机构，将裂隙段锚杆对两侧土体的拉结作用简化为一个线性弹簧。基于弹性体动力理论建立锚固系统动力平衡方程，并推导了锚杆轴力和位移的动力响应解析解。最后，以新疆高昌故城南城墙某段锚固工程为例对提出的解析方法进行了说明，明确了锚杆轴力响应特征及其分布规律，并通过数值分析对其合理性进行了验证。结果表明：在动力作用下同一位置锚杆的轴力响应呈围绕静力平衡位置的波动形态，轴力峰值点位于裂隙附近，且逐渐向临空端和锚固端指数衰减。在考虑地震加速度沿遗址高度的放大效应后能够获得较精确的锚杆轴力响应。  相似文献   

极地冰钻关键技术研究进展          下载免费PDF全文

张楠  王亮  Pavel Talalay  范晓鹏  王如生  杨阳  洪嘉琳  宫达  孙友宏  李院生  李冰 《探矿工程》2020,47(2):1-16

极地冰钻技术是获取冰芯，研究冰盖-冰架-海洋相互作用，以及获取极地冰下基岩与冰下水环境样品，开展冰下环境探测的重要手段。目前极地冰钻技术的难点与前沿主要包括深冰芯钻探、冰架热水钻、冰下基岩钻和冰下水环境采样与观测技术。本文针对以上4个极地冰钻关键技术，对国内外相关技术的研究进展与项目开展情况进行了总结与梳理。综合来看，虽然我国开展极地钻探技术研究起步较晚，但随着我国极地战略不断推进，我国的极地冰钻关键技术与装备的研究正持续向着赶超极地钻探强国方向迈进，这必将为我国的极地科学研究提供强有力的技术支撑。  相似文献   

Nonlinear analysis of masonry structures using fiber-section line elements     

Matteo Peruch  Enrico Spacone  Guido Camata 《地震工程与结构动力学》2019,48(12):1345-1364

For seismic analysis of unreinforced masonry (URM) buildings characterized by a box-like behavior, a widely accepted model is based on the equivalent frame idealization of walls. The equivalent frame model uses 1D elements to represent the vertical piers and horizontal spandrels which are connected by rigid nodes. The mechanical characterization of the elements is one of the crucial aspects to predict reasonably the building seismic behavior. Through the comparison with pseudo-static and dynamic experimental tests performed on two-story full-scale buildings, this paper validates the frame modeling in the OpenSees framework, which includes a fiber-section force-based beam element for the axial-flexural behavior, coupled with a cyclic shear-deformation phenomenological law.  相似文献   

Evaluation of force-based and displacement-based out-of-plane seismic assessment methods for unreinforced masonry walls through refined model simulations     

Michele Godio  Katrin Beyer 《地震工程与结构动力学》2019,48(4):454-475

The performance of force-based and displacement-based seismic assessment methods for the life-safety limit state check of out-of-plane loaded unreinforced masonry walls is evaluated on the basis of refined numerical simulations. For this purpose, a discrete element model of a vertically spanning wall is built and validated against experimental results from static and dynamic test conditions. The model is then analysed for a large range of wall configurations. For each configuration, a static pushover analysis and a series of incremental dynamic analyses are run, the latter permitting to determine the capacity of the wall under dynamic loading. The accuracy of the assessment methods in predicting the acceleration at which the walls collapse is evaluated. It is found that the displacement-based method is more accurate, robust, and safe than the force-based method. The comparison also shows that for walls characterised by a relatively high ratio of axial load to Euler's critical load, both assessment methods lead to an overestimation of the wall capacity. As a remedy, a modification to the methods based on a recently developed mechanical model is put forward and tested. For the force-based method, it is additionally suggested to set for walls with relatively high overburden ratios the behaviour factor equal to 1. To ensure reproducibility of this study, all input and output files of the numerical simulations are made publicly available.  相似文献   

Intercomparison of measurements of bulk snow density and water equivalent of snow cover with snow core samplers: Instrumental bias and variability induced by observers     

J. Ignacio López-Moreno  Leena Leppänen  Bartłomiej Luks  Ladislav Holko  Ghislain Picard  Alba Sanmiguel-Vallelado  Esteban Alonso-González  David C. Finger  Ali N. Arslan  Katalin Gillemot  Aynur Sensoy  Arda Sorman  M. Cansaran Ertaş  Steven R. Fassnacht  Charles Fierz  Christoph Marty 《水文研究》2020,34(14):3120-3133

Manually collected snow data are often considered as ground truth for many applications such as climatological or hydrological studies. However, there are many sources of uncertainty that are not quantified in detail. For the determination of water equivalent of snow cover (SWE), different snow core samplers and scales are used, but they are all based on the same measurement principle. We conducted two field campaigns with 9 samplers commonly used in observational measurements and research in Europe and northern America to better quantify uncertainties when measuring depth, density and SWE with core samplers. During the first campaign, as a first approach to distinguish snow variability measured at the plot and at the point scale, repeated measurements were taken along two 20 m long snow pits. The results revealed a much higher variability of SWE at the plot scale (resulting from both natural variability and instrumental bias) compared to repeated measurements at the same spot (resulting mostly from error induced by observers or very small scale variability of snow depth). The exceptionally homogeneous snowpack found in the second campaign permitted to almost neglect the natural variability of the snowpack properties and focus on the separation between instrumental bias and error induced by observers. Reported uncertainties refer to a shallow, homogeneous tundra-taiga snowpack less than 1 m deep (loose, mostly recrystallised snow and no wind impact). Under such measurement conditions, the uncertainty in bulk snow density estimation is about 5% for an individual instrument and is close to 10% among different instruments. Results confirmed that instrumental bias exceeded both the natural variability and the error induced by observers, even in the case when observers were not familiar with a given snow core sampler.  相似文献