Bidirectional shaking table tests of a low-cost friction sliding system with flat-inclined surfaces     

Miguel B. Brito  Mitsuyoshi Akiyama  Yoshitaka Ichikawa  Hiroki Yamaguchi  Riki Honda  Naomitsu Ishigaki 《地震工程与结构动力学》2020,49(8):817-837

A novel low-cost friction sliding system for bidirectional excitation is developed to improve the seismic performance of reinforced concrete (RC) bridge piers. The sliding system is a spherical prototype developed by combining a central flat surface with an inclined spherical segment, characterized by stable oscillation and a large reduction in response accelerations on the flat surface. The inclined part provides a restoring force that limits the residual displacements of the system. Conventional steel and concrete are employed to construct a flat-inclined spherical surface atop an RC pier. The seismic forces are dissipated through the frictions generated during the sliding movements; hence, the seismic resilience of bridges can be ensured with a low-cost design solution. The proposed system is fabricated utilizing a mold created by a three-dimensional printer, which facilitates the use of conventional concrete to construct spherical shapes. The concrete surface is lubricated with a resin material to prevent abrasion from multiple input ground motions. To demonstrate the effectiveness of the system, bidirectional shaking table tests are conducted in the longitudinal and transverse directions of a scaled bridge model. The effect of the inclination angle and the flat surface size is investigated. The results demonstrate a large decrease in response acceleration when the system exhibits circular sliding displacement. Furthermore, the inclination angle that generates the smallest residual displacement is identified experimentally.  相似文献   

The potential of Pléiades images with high angle of incidence for reconstructing the coastal cliff face in Normandy (France)     

《International Journal of Applied Earth Observation and Geoinformation》2020

To monitor chalk cliff face along the Normandy coast (NW France) which is prone to erosion, we tested the potential of cliff face 3D reconstruction using pairs of images with high angle of incidence at different dates from the agile Pléiades satellites. The verticality aspect of the cliff face brings difficulties in the 3D reconstruction process. Furthermore, the studied area is challenging mainly because the cliff face is north-oriented (shadow). Pléiades images were acquired over several days (multi-date stereoscopic method) with requested incidence angles until 40°. 3D reconstructions of the cliff face were compared using two software: ASP® and ERDAS IMAGINE®. Our results are twofold. Firstly, despite ASP® provides denser point clouds than ERDAS IMAGINE® (an average of 1.60 points/m² from 40° incidence angle stereoscopic pairs on the whole cliff face of Varengeville-sur-Mer against 0.77 points/m² respectively), ERDAS IMAGINE® provides more reliable point clouds than ASP® (precision assessment on the Varengeville-sur-Mer cliff face of 0.31 m ± 2.53 and 0.39 m ± 4.24 respectively), with a better spatial distribution over the cliff face and a better representation of the cliff face shape. Secondly, the quality of 3D reconstructions depends mostly on the amount of noise from raw images and on the shadow intensity on the cliff face (radiometric quality of images).  相似文献   

结合BM3D和多级非线性加权平均中值滤波的遥感影像混合噪声去噪方法     

任超  李现广  邓开元  潘亚龙  朱子林  张志刚  施显健 《测绘通报》2020,(1):89-93

提出了一种基于三维块匹配（BM3D）和多级非线性加权平均中值滤波的遥感影像混合噪声去噪方法，使用coief3小波和sym2小波替换传统三维块匹配算法中的bior1.5和hear参数，将三维块匹配算法和多级非线性加权平均中值滤波相结合以提高算法对混合噪声的去噪能力。进行一个仿真对比试验和一个真实遥感影像去噪试验，试验表明，本文提出的方法在遥感影像混合噪声去噪方面效果要优于传统混合噪声去噪方法。  相似文献   

面向数字孪生城市的智能化全息测绘   总被引：2，自引：0，他引：2  

顾建祥  杨必胜  董震  杨常红 《测绘通报》2020,(6):134-140

以大数据、物联网、人工智能、虚拟现实、云计算、智能驾驶等新技术为代表的信息化浪潮席卷全球，数字世界与物理世界正形成两大平行发展、相互作用的体系，数字孪生技术应运而生。随着物联网技术（IOT）的发展，数字孪生的理念被引入到智慧城市建设中来，深刻影响着城市规划、建设与治理。笔者所在单位面向数字孪生城市和自然资源统一监管对测绘地理信息的新需求，在全国开创性地开展了面向数字孪生城市的智能化全息测绘试点工作。本文结合上海市智能化全息测绘试点工作，从数字孪生城市、数字孪生城市对地理信息的新需求、智能化全息测绘关键技术及测绘成果等方面展开了论述，重点介绍了智能化全息测绘的技术体系和产品体系，以及在社会各领域的应用成果。  相似文献   

基于点云数据的不规则文物三维重建——以经幢为例     

喜文飞  李灵索  杨勇  李国柱  李春梅  李金平 《测绘通报》2020,(12):87-89

海量点云数据可以较好地构建文物的三维建模，针对文物复杂的表面结构，传统的算法很难达到精细建模，为了解决复杂模型表面的空间三角网构网问题，本文结合空间三角形的法向量构建三角网，以空间三角网表面的曲率为约束条件，构建物体表面的空间三角网，然后对构建的空间三角网进行精细建模。以昆明市文物——经幢为例进行三维重建试验，结果表明，新方法适合室内文物的三维建模，可以达到较好的效果。  相似文献   

敞开酸溶和偏硼酸锂碱熔ICP-MS法测定多金属矿中的稀土元素及铌钽锆铪   总被引：2，自引：2，他引：0  

门倩妮  沈平  甘黎明  冯博鑫 《岩矿测试》2020,39(1):59-67

用电感耦合等离子体质谱法(ICP-MS)测定地质样品中的稀土及难熔元素,混合酸敞开酸溶法和碱熔融法是两种主要的溶样方法。但地质样品组分复杂,元素之间存在相互共生的现象,对于特殊元素、特殊样品用传统酸溶法会造成部分元素消解不完全,使测定结果不准确;而碱熔法的操作过程繁琐,且溶液盐度高,易产生基体干扰和堵塞仪器进样系统。本文改进了传统四酸和五酸体系,采用氢氟酸-硝酸-硫酸敞开酸溶体系,用国家一级标准物质制作标准曲线测定15种稀土元素,方法准确度(ΔlgC)为0.001～0.027。同时改进了偏硼酸锂碱熔法,样品用偏硼酸锂碱熔提取,加入氢氧化钠调节溶液至碱性条件,所测元素与偏硼酸锂共沉淀后过滤分离熔剂,再用硝酸复溶测定15种稀土元素及铌钽锆铪。两种溶样方法的测定值与认定值的相对误差为1.09%～9.30%。将混合酸敞开酸溶法测定稀土元素、偏硼酸锂碱熔法测定铌钽锆铪的结果与其他实验室密闭酸溶法相比,两组数据的相对偏差为0.13%～15.32%。本实验表明,混合酸敞开酸溶法适用于测定地质样品中的稀土元素,偏硼酸锂碱熔法不仅适用于测定地质样品中的稀土元素及铌钽锆铪,也适用于测定如古老高压变质岩石及铝含量高的样品中的铌钽锆铪。  相似文献   

Three-dimensional active earth pressure from cohesive backfills with tensile strength cutoff     

Zheng-Wei Li  Tian-Zheng Li  Xiao-Li Yang 《国际地质力学数值与分析法杂志》2020,44(7):942-961

Most of previous analyses on the active earth pressure were performed in two-dimensional cases using the Mohr-Coulomb (M-C) failure function to describe the soil strength. However, all failures of retained slopes indicate a somewhat three-dimensional (3D) feature, and the M-C function is found to overestimate the tensile strength of cohesive soil. In this work, a kinematic limit analysis–based approach is developed for computing the 3D active earth pressure resulting from cohesive backfills. The concept of tensile strength cutoff is adopted to implement the reduction or elimination of tensile strength from the strength envelope. An extended 3D horn failure mechanism that is associated with the modified strength envelope is developed to characterize the collapse of retained slopes. The resultant of active earth pressure is evaluated from the work rate balance equation and expressed as an unfactored coefficient. The obtained results indicate that less support provided by the wall is required when allowing the existence of soil cohesion and 3D effects and that eliminating the tensile strength can observably increase the active earth pressure, especially for the backfill with a great level of cohesion.  相似文献   

陡立矿山岩壁治理中的飘台稳定性分析          下载免费PDF全文

王腾飞  王蒙 《探矿工程》2020,47(10):61-66

随着国家和社会的发展，人们对生态环境越发重视。在经济发展的过程中，因采矿而遗留下了大量的废弃矿坑，这些矿坑的治理迫在眉睫。飘台作为一种治理高陡光滑岩壁的有效方法，在实际工程中被大量使用，然而对飘台稳定性的分析大多停留在简单的公式上。本文设计了一种适用于陡立矿山岩壁治理的砼制飘台结构，提炼了计算飘台稳定性的公式并结合FLAC3D数值模拟软件，对飘台的稳定性进行了分析。研究结果表明，此砼制飘台比较适用于陡立矿山岩壁的治理。  相似文献   

晚第四纪MIS6以来柴达木盆地成盐作用对冰期气候的响应   总被引：2，自引：0，他引：2  

陈安东  郑绵平  宋高  王学锋  李洪普  韩光  袁文虎 《地质论评》2020,66(3):611-624

气候是控制柴达木盆地盐类沉积的主要因素之一,但是其作用机制尚待明确。作者以柴达木盆地察汗斯拉图盐湖的3个含盐剖面为研究对象,采用多接收电感耦合等离子质谱(MC-ICP-MS)铀系测年测定其沉积时代,并通过X射线粉晶衍射(XRD)分析测定其盐类矿物种类。铀系测年显示D18剖面石盐和芒硝层的沉积时代为13.1±2.0 ka BP～15.9±2.5 ka BP,其中芒硝沉积年代属于末次冰期MIS2晚期;MXK2剖面芒硝层的沉积时代分别为131.7±39.5 ka BP和158.3±10.8 ka BP,D12剖面芒硝层的沉积时代分别为166.6±20.2 ka BP和198.0±20.6 ka BP,可以对应于倒数第二次冰期MIS6。XRD分析确定了3个剖面的盐类矿物主要为芒硝、石盐和石膏。综合多个盐湖晚第四纪成盐数据,本文认为倒数第二次冰期MIS6和末次冰期MIS2是柴达木盆地晚第四纪重要的成盐期,冰期的冷干气候有利于石盐和芒硝等盐类沉积。柴达木盆地"冰期成盐"的根本原因,是由于冰期环境下盆地周边山体冰川规模的扩张以及干冷的冰期气候,共同造成了盐湖补给水量的减少。此外,晚第四纪MIS6和MIS2的冰期降温也是导致盆地中冷相盐类沉积的直接原因。  相似文献   

非典型周期和气候突变的识别与判定          下载免费PDF全文

秦建国 《水文》2020,40(1):23-28

通过两种新方法分析了无锡站降水年际变化的突变性、周期性等特征,揭示了旱涝演化的自然规律。研究表明,1934、1978、2013年是我国近现代气候突变的临界点,这是旱涝演化的自然选择;无锡站年际降水的观测历史可分成四个特征不同的时段,每个时段节点对应的都是一次气候突变;气候突变会改变年际降水序列的一致性,分段法研究可以大幅度降低模拟难度、提高预测效率。发现并确认了3个气候突变点,实现了超长缺测中断期(13a)旱涝趋势的精确插补,完成了无锡站近百年降雨序列的周期性分析与旱涝趋势预测模拟,研究成果改变了近现代气候历史无法细分的现状。  相似文献