2018年9月8日墨江地震及周边地区构造应力场特征分析   总被引：1，自引：0，他引：1       下载免费PDF全文

李泽潇  万永革  崔华伟  李振月  胡晓辉  黄骥超  靳志同 《地球物理学报》2020,63(4):1431-1443

2018年9月8日,云南省墨江县发生MS5.9地震并伴随一系列余震,探究该地震周围的应力场对于理解该地震的发生机制和后续地震的发展趋势具有着重要的参考意义.本研究收集了震源及其邻区中前人研究和Global CMT所给出的震源机制资料,对该地区进行了构造应力场反演,并同时利用反演得到的应力张量模拟墨江地区的震源机制解表现.结果表明:(1)在应力轴整体分布上,自西向东σ1轴(压轴)从NNE-SSW向逐渐转向NNW-SSE向,σ3轴(张轴)从WWN-EES向逐渐转向WWS-EEN向,张轴呈弧形分布,压轴呈放射状分布.(2)在应力轴倾伏角上,研究区域内的压应力轴和张应力轴倾伏角都比较小,即两轴均接近水平.(3)R值分布大体是在东南部相较于西北部大,结合当地地质背景分析得到,物质逃逸自西北向东南呈逐渐变缓的趋势.(4)利用反演得到的应力张量和应力状态计算墨江地震震源区的相对剪应力和相对正应力大小.由此推测,墨江地震恰好发生在相对剪切应力值和相对正应力正值最大的节面上.从而可以确定墨江地震的发震节面的基本参数:走向216.32°,倾角86.91°,滑动角0.27°,相对剪应力值0.9,相对正应力值0.3.本研究为此次墨江地震的发震背景和地震动力学研究提供了基础性资料.  相似文献   

Bidirectional shaking table tests of a low-cost friction sliding system with flat-inclined surfaces     

Miguel B. Brito  Mitsuyoshi Akiyama  Yoshitaka Ichikawa  Hiroki Yamaguchi  Riki Honda  Naomitsu Ishigaki 《地震工程与结构动力学》2020,49(8):817-837

A novel low-cost friction sliding system for bidirectional excitation is developed to improve the seismic performance of reinforced concrete (RC) bridge piers. The sliding system is a spherical prototype developed by combining a central flat surface with an inclined spherical segment, characterized by stable oscillation and a large reduction in response accelerations on the flat surface. The inclined part provides a restoring force that limits the residual displacements of the system. Conventional steel and concrete are employed to construct a flat-inclined spherical surface atop an RC pier. The seismic forces are dissipated through the frictions generated during the sliding movements; hence, the seismic resilience of bridges can be ensured with a low-cost design solution. The proposed system is fabricated utilizing a mold created by a three-dimensional printer, which facilitates the use of conventional concrete to construct spherical shapes. The concrete surface is lubricated with a resin material to prevent abrasion from multiple input ground motions. To demonstrate the effectiveness of the system, bidirectional shaking table tests are conducted in the longitudinal and transverse directions of a scaled bridge model. The effect of the inclination angle and the flat surface size is investigated. The results demonstrate a large decrease in response acceleration when the system exhibits circular sliding displacement. Furthermore, the inclination angle that generates the smallest residual displacement is identified experimentally.  相似文献   

The potential of Pléiades images with high angle of incidence for reconstructing the coastal cliff face in Normandy (France)     

《International Journal of Applied Earth Observation and Geoinformation》2020

To monitor chalk cliff face along the Normandy coast (NW France) which is prone to erosion, we tested the potential of cliff face 3D reconstruction using pairs of images with high angle of incidence at different dates from the agile Pléiades satellites. The verticality aspect of the cliff face brings difficulties in the 3D reconstruction process. Furthermore, the studied area is challenging mainly because the cliff face is north-oriented (shadow). Pléiades images were acquired over several days (multi-date stereoscopic method) with requested incidence angles until 40°. 3D reconstructions of the cliff face were compared using two software: ASP® and ERDAS IMAGINE®. Our results are twofold. Firstly, despite ASP® provides denser point clouds than ERDAS IMAGINE® (an average of 1.60 points/m² from 40° incidence angle stereoscopic pairs on the whole cliff face of Varengeville-sur-Mer against 0.77 points/m² respectively), ERDAS IMAGINE® provides more reliable point clouds than ASP® (precision assessment on the Varengeville-sur-Mer cliff face of 0.31 m ± 2.53 and 0.39 m ± 4.24 respectively), with a better spatial distribution over the cliff face and a better representation of the cliff face shape. Secondly, the quality of 3D reconstructions depends mostly on the amount of noise from raw images and on the shadow intensity on the cliff face (radiometric quality of images).  相似文献   

结合BM3D和多级非线性加权平均中值滤波的遥感影像混合噪声去噪方法     

任超  李现广  邓开元  潘亚龙  朱子林  张志刚  施显健 《测绘通报》2020,(1):89-93

提出了一种基于三维块匹配（BM3D）和多级非线性加权平均中值滤波的遥感影像混合噪声去噪方法，使用coief3小波和sym2小波替换传统三维块匹配算法中的bior1.5和hear参数，将三维块匹配算法和多级非线性加权平均中值滤波相结合以提高算法对混合噪声的去噪能力。进行一个仿真对比试验和一个真实遥感影像去噪试验，试验表明，本文提出的方法在遥感影像混合噪声去噪方面效果要优于传统混合噪声去噪方法。  相似文献   

面向数字孪生城市的智能化全息测绘   总被引：2，自引：0，他引：2  

顾建祥  杨必胜  董震  杨常红 《测绘通报》2020,(6):134-140

以大数据、物联网、人工智能、虚拟现实、云计算、智能驾驶等新技术为代表的信息化浪潮席卷全球，数字世界与物理世界正形成两大平行发展、相互作用的体系，数字孪生技术应运而生。随着物联网技术（IOT）的发展，数字孪生的理念被引入到智慧城市建设中来，深刻影响着城市规划、建设与治理。笔者所在单位面向数字孪生城市和自然资源统一监管对测绘地理信息的新需求，在全国开创性地开展了面向数字孪生城市的智能化全息测绘试点工作。本文结合上海市智能化全息测绘试点工作，从数字孪生城市、数字孪生城市对地理信息的新需求、智能化全息测绘关键技术及测绘成果等方面展开了论述，重点介绍了智能化全息测绘的技术体系和产品体系，以及在社会各领域的应用成果。  相似文献   

基于点云数据的不规则文物三维重建——以经幢为例     

喜文飞  李灵索  杨勇  李国柱  李春梅  李金平 《测绘通报》2020,(12):87-89

海量点云数据可以较好地构建文物的三维建模，针对文物复杂的表面结构，传统的算法很难达到精细建模，为了解决复杂模型表面的空间三角网构网问题，本文结合空间三角形的法向量构建三角网，以空间三角网表面的曲率为约束条件，构建物体表面的空间三角网，然后对构建的空间三角网进行精细建模。以昆明市文物——经幢为例进行三维重建试验，结果表明，新方法适合室内文物的三维建模，可以达到较好的效果。  相似文献   

Sentinel-2卫星落叶松林龄信息反演   总被引：1，自引：0，他引：1  

唐少飞  田庆久  徐凯健  徐念旭  岳继博 《遥感学报》2020,24(12):1511-1524

林龄结构信息能够有效反映区域森林群落不同生长阶段的固碳能力，对于评估森林生态系统的健康状况具有重要意义。本研究以中国温带典型优势树种落叶松林为研究对象，分别选择其芽萌动期、展叶期和落叶期时段的Sentinel-2影像，采用多元线性回归（MLR）、随机森林（RF）、支持向量机回归（SVR）、前馈反向传播神经网络（BP）以及多元自适应回归样条（MARS）等5种方法依次构建落叶松林龄反演模型。通过相关性分析首先确定最佳遥感反演物候期，并在此基础上根据相关性差异筛选出5个最优特征变量用于模型反演，分别为冠层含水量（CWC），归一化水体指数（NDWI），叶面积指数（LAI），光合有效辐射吸收率（FAPAR）和植被覆盖度（FVC）。研究结果表明，展叶期为落叶松林最佳遥感反演物候期。除植被衰减指数（PSRI）以及落叶期的NDVI、RVI外，落叶松林龄与各指标之间均呈负相关关系，其中与冠层含水量（CWC）的相关性最高，pearson相关系数达到-0.74（p<0.01）。此外，不同模型反演结果表明，随机森林模型（RF）为最佳落叶松林龄估测模型，其平均决定系数R²和平均均方根误差RMSE分别为0.89和2.91 a；多元线性回归模型（MLR）的林龄估测结果最差，其平均决定系数R²和平均均方根误差RMSE仅为0.57和5.69 a，非线性模型能更好的解释林龄与建模变量之间的关系。  相似文献   

A continuous tephrostratigraphic record from the Labrador Sea spanning the last 65 ka     

Sunniva Rutledal  Haflidi Haflidason  Sarah M. P. Berben  Lisa Griem  Eystein Jansen 《第四纪科学杂志》2020,35(7):855-868

Volcanic ash preserved in marine sediment sequences is key for independent synchronization of palaeoclimate records within and across different climate archives. Here we present a continuous tephrostratigraphic record from the Labrador Sea, spanning the last 65–5 ka, an area and time period that has not been investigated in detail within the established North Atlantic tephra framework. We investigated marine sediment core GS16-204-22CC for increased tephra occurrences and geochemically analysed the major element composition of tephra shards to identify their source volcano(es). In total we observed eight tephra zones, of which five concentration peaks show isochronous features that can be used as independent tie-points in future studies. The main transport mechanism of tephra shards to the site was near-instantaneous deposition by drifting of sea ice along the East Greenland Current. Our results show that the Icelandic Veidivötn volcanic system was the dominant source of tephra material, especially between late Marine Isotope Stage (MIS) 4 and early MIS 3. The Veidivötn system generated volcanic eruptions in cycles of ca. 3–5 ka. We speculate that the quantity of tephra delivered to the Labrador Sea was a result of variable Icelandic ice volume and/or changes in the transportation pathway towards the Labrador Sea.  相似文献   

A Floating Astronomical Time Scale for the Early Late Cretaceous Continental Strata in the Songliao Basin, Northeastern China     

MA Xiaojuan  WU Huaichun  FANG Qiang  SHI Meinan  ZHANG Shihong  YANG Tianshui  LI Haiyan  WANG Chengshan 《《地质学报》英文版》2020,94(1):27-37

A continuous terrestrial succession was recovered from the Songke-2(SK-2) borehole in the Songliao Basin, Northeastern China. This borehole provides a unique material for further research on the continental paleoclimate during Cretaceous greenhouse period, following a series of achievements of the Songke-1(SK-1) core. In this study, thorium(Th) logging data were chosen as a paleoclimate proxy to conduct a detailed cyclostratigraphic analysis. The Th series varies quasi-periodically; power spectra and evolutionary fast Fourier transformation(FFT) analysis reveal significant cycles in the Quantou(K2 q), Qingshankou(K2 qn), Yaojia(K2 y) and Nenjiang(K2 n) formations. The ratio of cycle wavelengths in these stratigraphic units is approximately 20:5:2:1, corresponding to long orbital eccentricity(405 kyr), short orbital eccentricity(100 kyr), obliquity(37 kyr), and precession cycles(22.5 kyr and 18.4 kyr). The durations of the K2 n, K2 y, K2 qn and K2 q are estimated as 6.97, 1.83, 5.30 and 4.52 Myr, respectively, based on the constructed ～18.62 Myr "floating" astronomical time scale(ATS). Comparison of the durations between the SK-1 s and SK-2 boreholes exhibits a slight difference of 0.06 Myr and 0.459 Myr for K2 qn and K2 y. Nevertheless, our ATS of K2 n supports the chronostratigraphic frame constructed by the CA-ID-TIMS data of the SK-1 s borehole. This new "floating" ATS provides precise numerical ages for stratigraphic boundaries, biozones and geological events in the Songliao Basin, and can serve as a basis for correlation of strata and events between marine and terrestrial systems.  相似文献   

云南广南县老寨湾金矿地质特征及找矿标志     

高李阳  顾雄  吴小梅 《云南地质》2020,(1):71-75

广南县老寨湾金矿位于滇、黔、桂“金三角”重要成矿区带上,金矿体矿体呈似层状赋存于断层构造破碎带或层间构造破碎带中,构造控矿明显。矿体围岩均为下泥盆统坡松冲组第一段(D1ps1)硅化石英砂岩;矿床成因属中-低温热液叠加改造型金矿床,断层构造、硅化等矿化蚀变及地球化学异常是重要的找矿标志。  相似文献