Moving load response of an axially loaded Timoshenko beam on a multilayered transversely isotropic half-space comprising different media     

Yi-Cheng Li  Shi-Jin Feng  Zhang-Long Chen 《国际地质力学数值与分析法杂志》2020,44(18):2501-2523

This paper investigates the dynamic response of an axially loaded Timoshenko beam coupled with a multilayered transversely isotropic (TI) half-space subjected to a moving load. An axial force induced by the thermal expansion is taken into account in the Timoshenko beam. The half-space considers the alternate distribution of an arbitrary number of TI elastic and poroelastic layers to model foundation soils with different properties and moisture conditions. To solve the governing equations, Fourier transform is adopted. The stratified foundation is formulated by extending an “adapted stiffness matrix method” to a more general scenario with an arbitrary number of layers. The beam is then coupled with the foundation to derive solutions to the system in the frequency-wavenumber domain. The final results in the time-spatial domain are recovered by the inverse Fourier transform. After confirming the accuracy of the method in this study, the influences of the pore water existence, the transverse isotropy of different parameters, and the axial force are investigated. It can be observed that the effect of pore water existence on the maximum beam deflection can reach 22% in this study. The transverse isotropy of the elastic and shear moduli influences the critical speed of the beam deflection by altering the phase velocity of the first wave propagation mode of the beam-foundation system. The vertical permeability coefficient is more important than the horizontal one in determining the excess pore pressure. The rise of the beam temperature (axial force) decreases the critical speed and magnifies the vibrations.  相似文献   

Characteristics of boundary fault systems and its hydrocarbon controlling on hydrocarbon accumulation in Awati Sag,Tarim Basin,China     

《China Geology》2019,2(1):94-107

Based on the interpretation of two-dimensional seismic data, this paper analyzes the characteristics of three boundary fault systems including the Shajingzi fault, the Aqia fault and the Tumuxiuke fault around the Awati sag of the Tarim Basin, and studies its controlling on hydrocarbon accumulation. Neotectonic movement is ubiquitous in oil and gas bearing basins in China, such as Neogene intense activities of large boundary thrusting faults of the Awati sag: Shajingzi fault, Aqia fault and Tumuxiuke fault. Based on a large number of seismic data, it is showed that they have section wise characteristics in the direction of fault strike, and active periods and associated structures formed of different sections are different. Usually, large anticlinal structures are formed in the upper wall, and faulted anticline controlled by companion faults are formed in the bottom wall. Large faults cut the strata from Cambrian up to Neogene. For the anticline in the upper wall, fault activities caused by neotectonic movement played a destructive role in hydrocarbon accumulation, thus the preservation condition is critical for reservoir formation. In this sense, attention should be paid to formations in the upper walls of Aqia fault and Tumuxiuke fault under the Cambrian salt bed, whose plastic deformation could help to heal faults. Companion faults in the bottom wall cut down to the Cambrian and up to the Triassic serving as the pathway for hydrocarbon migration, and associated structures in the bottom wall are noteworthy exploration targets.©2019 China Geology Editorial Office.  相似文献   

姿态修正技术在黄河河口测验中的应用     

宋中华  田慧  王静 《测绘通报》2020,(11):120-123

为了解决黄河三角洲附近海区测验中测船姿态对单波束数字测深数据的影响，本文利用姿态传感器对测船的姿态进行了有效改正。试验结果表明，姿态修正技术对数字测深仪瞬时水深进行改正后，其测深结果与传统的人工水深曲线改正后成果比较，中误差为0.089 m，试验段面0 m线以下面积相差不超过0.22%，符合国家规范要求，提高了海区测验中测深成果的精度，为数字技术在海区测量的应用提供了技术保证。  相似文献   

Using visibility analysis to improve point density and processing time of SfM-MVS techniques for 3D reconstruction of landforms     

Álvaro Gómez-Gutiérrez  Trent Biggs  Napoleon Gudino-Elizondo  Paz Errea  Esteban Alonso-González  Estela Nadal Romero  José Juan de Sanjosé Blasco 《地球表面变化过程与地形》2020,45(11):2524-2539

Image network geometry, including the number and orientation of images, impacts the error, coverage, and processing time of 3D terrain mapping performed using structure-from-motion and multiview-stereo (SfM-MVS). Few studies have quantified trade-offs in error and processing time or ways to optimize image acquisition in diverse topographic conditions. Here, we determine suitable camera locations for image acquisition by minimizing the occlusion produced by topography. Viewshed analysis is used to select the suitable images, which requires a preliminary digital elevation model (DEM), potential camera locations, and sensor parameters. One aerial and two ground-based image collections were used to analyse differences between SfM-MVS models produced using: (1) all available images (ALL); (2) images selected using conventional methods (CON); and (3) images selected using the viewshed analysis (VIEW). The resulting models were compared with benchmark point clouds acquired by a terrestrial laser scanner (TLS) and TLS-derived DEMs. The VIEW datasets produced denser point clouds (28–32% more points) and DEMs with up to 66% reduction in error compared with CON datasets due to reduction of gaps in the DEM. VIEW datasets reduced processing time by 37–76% compared with ALL, with no reduction in coverage or increase in error. DEMs produced with ALL and VIEW datasets had similar slope and roughness, while slight differences that may be locally important were observed for the CON dataset. The new method helps optimize SfM-MVS image collection strategies that significantly reduce the number of images required with minimal loss in coverage or accuracy over complex surfaces. © 2020 John Wiley & Sons, Ltd.  相似文献   

小跨高比带楼板半通缝连梁抗震性能有限元分析          下载免费PDF全文

张超  陈向上  于德湖 《世界地震工程》2018,34(1):051-62

为了缓解联肢剪力墙中小跨高比连梁发生低延性的剪切破坏，增强连梁的变形和耗能能力，可在单连梁中轴线位置设置半通缝并配置交叉斜筋，形成半通缝连梁。本文完成了的对7种连梁的模拟，分析了在小跨高比、低周反复荷载作用条件下不同类型带楼板连梁的承载力、变形能力、刚度退化和耗能能力以及不同跨高比、不同开缝位置对带楼板半通缝连梁抗震性能的影响。结果表明:楼板会使半通缝连梁的剪压比增大，延性下降；但相比于普通连梁和双连梁，半通缝连梁具有较好的变形能力和承载力，可在实际中推广。  相似文献   

基于多项式拟合均匀荷载面曲率曲线的结构损伤识别方法          下载免费PDF全文

唐盛华  苏彬建  方志  张学兵 《世界地震工程》2018,34(1):121-130

为仅利用结构损伤状态的柔度矩阵对结构进行损伤程度识别，先对损伤状态的均匀荷载面曲率曲线进行最小二乘法拟合。根据曲率曲线差判断结构的损伤位置，对损伤位置的点进行剔除后，再利用未损伤位置上的点进行局部最小二乘法拟合，代替损伤前的均匀荷载面曲率曲线，用于结构的损伤定位与定量。通过一简支梁数值算例，先以理论的二次多项式进行拟合，考虑单损伤和多损伤的情况，进行损伤识别分析，再分析多项式次数、测点数目以及不同噪声水平对损伤定量精度的影响。结果表明:在一定范围内，次数越高拟合误差越小，但差别不明显，采用理论的二次多项式拟合即可满足结构损伤识别要求，无噪声的情况下，测点数目减半不影响损伤识别的精度，该方法具有一定的抗噪声能力。  相似文献   

电子束流激发的电子声波数值模拟          下载免费PDF全文

于彬  高新亮  樊凯  杜爱民 《地球物理学报》2018,61(9):3536-3544

通过一维静电粒子模拟程序研究了电子束流不稳定性，其中束流电子的温度远大于背景电子的温度.结果发现，所激发的波动主要是电子声波，波动的演化经历了线性增长和非线性饱和两个阶段.在非线性饱和阶段，由于电子声波相速度随频率是变化的，它可以通过非线性相互作用将背景比较冷的电子加速到很高的能量.此外，还研究了束流电子的温度、束流电子和背景电子的相对密度以及束流电子的漂移速度对电子束流不稳定性的影响.  相似文献   

涉密矢量数字地图中敏感要素几何信息量的测度方法     

李安波  陈楹  姚蒙蒙  吴赛松 《地球信息科学学报》2018,20(1):7-16

涉密矢量数字地图中敏感要素几何信息的定量测度,是实现定量化密级评定的基础和前提。如何进行敏感要素几何信息量的计算,目前尚缺乏相关研究。在现有地图信息论研究成果的基础上,论文主要开展了3方面的研究工作：首先,从地理对象的敏感性入手,探讨了地图要素敏感性的定义与要素集合的敏感性表征指标;然后,基于任意发生元的Voronoi构建方法,实现了对点要素集、线要素集、部分覆盖面要素集及综合要素集的信息单元自动化剖分;最后,基于长度系数、面积系数和角度系数,提出了线、面要素图形复杂度的计算方法,并在此基础上形成了涉密矢量数字地图中敏感几何信息量的测度方法。实验表明,该方法的计算结果遵循了信息量的非负性、连续性、可加性等特点,较为合理地反映了相关因素（地图比例尺、要素空间分布、要素图形复杂度、要素敏感系数等）对计算结果的影响。相关成果将支持矢量数字地图的定量化密级评定,并有助于完善地理信息安全监管的理论和方法体系。  相似文献   

临汾地震台垂直摆倾斜观测资料阶变异常分析     

张红秀  罗振东  邰垣东  郭国祥 《地震地磁观测与研究》2018,39(4):154-157

对临汾地震台垂直摆倾斜观测资料中记录到的阶变型异常图像进行分析，对异常成因进行探讨，希望对观测数据异常判断、数据预处理及地震预测预报的应用研究，提供一定参考。  相似文献   

Cu–Mo Differential Mineralization Mechanism of the Dabate Polymetallic Deposit in Western Tianshan,NW China: Evidence from Geology,Fluid Inclusions,and Oxygen Isotope Systematics     

Rui Cao  Shengchao Yan  Bin Chen  Keke Sun  Qinglin Zhang  Haodong Gu 《Resource Geology》2020,70(1):50-69

Classic porphyry Cu–Mo deposits are mostly characterized by close temporal and spatial relationships between Cu and Mo mineralization. The northern Dabate Cu–Mo deposit is a newly discovered porphyry Cu–Mo polymetallic deposit in western Tianshan, northwest China. The Cu mineralization postdates the Mo mineralization and is located in shallower levels in the deposit, which is different from most classic porphyry Cu–Mo deposits. Detailed field investigations, together with microthermometry, laser Raman spectroscopy, and O‐isotope studies of fluid inclusions, were conducted to investigate the origin and evolution of ore‐forming fluids from the main Mo to main Cu stage of mineralization in the deposit. The results show that the ore‐forming fluids of the main Mo stage belonged to an NaCl + H₂O system of medium to high temperatures (280–310°C) and low salinities (2–4 wt% NaCl equivalent (eq.)), whereas that of the main Cu stage belonged to an F‐rich NaCl + CO₂ + H₂O system of medium to high temperatures (230–260°C) and medium to low salinities (4–10 wt% NaCl eq.). The δ¹⁸O values of the ore‐forming fluids decrease from 3.7–7.8‰ in the main Mo stage to ?7.5 to ?2.9‰ in the main Cu stage. These data indicate that the separation of Cu and Mo was closely related to a large‐scale vapor–brine separation of the early ore‐forming fluids, which produced the Mo‐bearing and Cu‐bearing fluids. Subsequently, the relatively reducing (CH₄‐rich) Mo‐bearing, ore‐forming fluids, dominantly of magmatic origin, caused mineralization in the rhyolite porphyry due to fluid boiling, whereas the relatively oxidizing (CO₂‐rich) Cu‐bearing, ore‐forming fluids mixed with meteoric water and precipitated chalcopyrite within the crushed zone at the contact between rhyolite porphyry and wall rock. We suggest that the separation of Cu and Mo in the deposit may be attributed to differences in the chemical properties of Cu and Mo, large‐scale vapor–brine separation of early ore‐forming fluids, and changes in oxygen fugacity.  相似文献