A simple strategy for dynamic substructuring: I. Concept and development     

Aikaterini Stefanaki  M. V. Sivaselvan 《地震工程与结构动力学》2018,47(9):1801-1822

Dynamic substructuring refers to physical testing with computational models in the loop. This paper presents a new strategy for such testing. The key feature of this strategy is that it decouples the substructuring controller from the physical subsystem. Unlike conventional approaches, it does not explicitly include a tracking controller. Consequently, the design and implementation of the substructuring controls are greatly simplified. This paper motivates the strategy and discusses the main concept along with details of the substructuring control design. The focus is on configurations that use shake tables and active mass drivers. An extensive experimental assessment of the new strategy is presented in a companion paper, where the influence of various factors such as virtual subsystem dynamics, control gains, and nonlinearities is investigated, and it is shown that robustly stable and accurate substructuring is achieved.  相似文献   

Mesocosm experiments identifying hotspots of groundwater upwelling in a water column by fibre optic distributed temperature sensing          下载免费PDF全文

Amaya Irene Marruedo Arricibita  Stefan Krause  Jesus Gomez‐Velez  David M. Hannah  Jörg Lewandowski 《水文研究》2018,32(2):185-199

Lacustrine groundwater discharge (LGD) can substantially impact ecosystem characteristics and functions. Fibre optic distributed temperature sensing (FO‐DTS) has been successfully used to locate groundwater discharge into lakes and rivers at the sediment–water interface, but locating groundwater discharge would be easier if it could be detected from the more accessible water surface. So far, it is not clear if how and under which conditions the LGD signal propagates through the water column to the water surface–atmosphere interface, and what perturbations and signal losses occur along this pathway. In the present study, LGD was simulated in a mesocosm experiment. Under winter conditions, water with temperatures of 14 to 16 °C was discharged at the bottom of a 10 × 2.8‐m mesocosm. Water within this mesocosm ranged from 4.0 to 7.4 °C. Four layers (20, 40, 60, and 80 cm above the sediment) of the 82 cm deep mesocosm were equipped with FO‐DTS for tracing thermal patterns in the mesocosm. Aims are (a) to test whether the positive buoyancy of relatively warm groundwater imported by LGD into shallow water bodies allows detection of LGD at the lake's water surface–atmosphere interface by FO‐DTS, (b) to analyse the propagation of the temperature signal from the sediment‐water interface through the water column, and (c) to learn more about detectability of the signal under different discharge rates and weather conditions. The experiments supported the benchmarking of scale dependencies and robustness of FO‐DTS applications for measuring upwelling into aquatic environments and revealed that weather conditions can have important impacts on the detection of upwelling at water surface–atmosphere interfaces at larger scales.  相似文献   

新型钢弹簧浮置板道床隔振试验与数值分析研究          下载免费PDF全文

高扬  张强  刘文光  李腾 《世界地震工程》2020,(3):038-47

提出了一种附加位移放大杠杆的新型钢弹簧浮置板道床隔振装置并进行了理论分析，给出了该装置基于位移放大倍数的阻尼力和耗能计算公式。同时设计制作了附加3倍位移放大的新型钢弹簧浮置板道床隔振装置并进行了地铁振动测试，试验结果表明:该装置隔振效果显著。通过建立新型钢弹簧浮置板道床隔振系统有限元分析模型，数值模拟结果与实测振动数据可进行较好的吻合，结果表明:新型钢弹簧浮置板道床隔振系统能有效地减小结构的动力响应。  相似文献   

钻压水动力增效装置试验研究          下载免费PDF全文

汤凤林  段隆臣  Ю.Д.Бессонов  吴翔  窦斌  宁伏龙 《探矿工程》2011,38(6):76-79

在复杂地质条件下进行钻探或处理事故时,常有需要增加钻压的情况。而所选钻机其所能产生的轴向压力是一定的。因此,在钻机选定后如何增加钻压的问题是个非常重要的问题,有时是一个非常急迫的问题。乌克兰国立矿业大学的专家们利用水力动力学原理研制出了一种新型钻压水动力增效装置,可以解决上述问题,值得借鉴。介绍了这种钻压水动力增效装置（ГУОН）的工作原理及其技术性能指标,并通过试验结果与理论计算结果进行了对比。  相似文献   

Investigation on performance of all optical buffer with large dynamical delay time based on cascaded double loop optical buffers     

王拥军  吴重庆  忻向军  余贶琭  张晓磊 《海洋学报(英文版)》2010,29(9)

Optical buffers are critical for optical signal processing in future optical packet-switched networks. In this paper, a theoretical study as well as an experimental demonstration on a new optical buffer with large dynamical delay time is carried out based on cascaded double loop optical buffers (DLOBs). It is found that pulse distortion can be restrained by a negative optical control mode when the optical packet is in the loop. Noise analysis indicates that it is feasible to realise a large variable delay range by cascaded DLOBs. These conclusions are validated by the experiment system with 4-stage cascaded DLOBs. Both the theoretical simulations and the experimental results indicate that a large delay range of 1--9999 times the basic delay unit and a fine granularity of 25 ns can be achieved by the cascaded DLOBs. The performance of the cascaded DLOBs is suitable for the all optical networks.  相似文献   

基于65-nm CMOS工艺的W波段两路电流合成型功率放大器的设计     

黄占秋  张旭  赵晨曦  康凯 《南京气象学院学报》2021,13(4):425-430

采用三级差分共源结构设计了一种基于65-nm CMOS工艺的W波段功率放大器,并利用两路电流型功率合成结构进行功率合成以提升输出功率.为了同时实现单差分转换、阻抗匹配、直流供电,匹配网络采用变压器结构.仿真结果显示,在1 V的电源电压下,该功率放大器的小信号增益为12.7~15.7 dB,3-dB带宽为84~104 GHz,饱和输出功率为14.6 dBm,峰值功率附加效率为9.7%.该功率放大器具有良好的大信号性能,且芯片的核心面积仅为0.115 mm².  相似文献   

手持式激光测距仪前级接收通道的相关问题研究   总被引：2，自引：0，他引：2  

夏界宁 《大地测量与地球动力学》2007,27(Z1):93-95

介绍了手持式激光测距仪前置放大电路的设计方法,并且针对便携式设备供电的特殊性,给出了单电源供电放大电路的解决方案,较好地解决了前级接收通道电路设计的相关问题.  相似文献   

CINRAD/SA(B)发射机触发器芯片级故障诊断流程     

潘新民  尹春光  崔炳俭  弓宇恒 《气象科技》2018,46(3):443-449

发射机触发放大器主要为调制器中SCR开关管提供放电触发脉冲,同时兼具调制组件的保护功能。发射机触发器芯片级故障诊断流程将触发器故障定位到芯片级,大大降低了触发器故障维修成本,同时为雷达测试平台中触发器故障自动诊断建模提供了技术支持。在发射机触发器信号流程基础上,依据发射机触发器关键点波形或关键点电平,通过触发器故障树图了解故障因果关系,研究出规范化的触发器芯片级故障诊断流程。列举了依据触发器芯片级故障诊断流程,修复了由于单稳态触发器无触发信号输出,导致无-200V放电触发信号的单稳态触发器故障个例。结果表明:芯片级触发器故障诊断流程可以快速定位发射机触发器故障点到最小可更换芯片。具有操作方法简洁、诊断思路清晰、操作规范,基层雷达站技术人员容易掌握的特点,可有效提高新一代天气雷达技术保障水平,保证雷达观测数据的可靠性。  相似文献   

CINRAD/SA(B)发射机激励放大器芯片级故障诊断流程     

潘新民  白水成  崔炳俭 《气象与环境科学》2017,40(3):119-124

激励放大器是发射机射频放大链电路前级功率放大器,对雷达探测资料可靠性具有重要作用。研究芯片级故障诊断流程,一方面可以解决台站技术保障人员无法故障定位到芯片级的技术难题;另一方面,芯片级故障维修可达到大大降低维修成本的目的。雷达故障一般分为参数调整不当导致性能下降故障和器件损坏造成参数异常故障。为此,通过总结出CINRAD/SA(B)发射机激励放大器信号流程、故障树图集,在依据同步信号时序关系及关键点波形参数基础上,研究出规范化的激励放大器调试技术和方法,以及激励放大器芯片级故障诊断定位流程,并列举了依据激励放大器芯片级故障诊断定位流程,修复激励放大器集成块N8损坏,导致+8 V电源不正常,造成激励放大器无功率输出,以及激励放大器的第二级功放模块故障导致激励放大器输出功率低的两个故障的典型个例,以检验维修效果。实际应用结果表明:芯片级激励放大器故障诊断定位流程可以快速定位发射机激励放大器故障点到故障器件,方法简洁、思路清晰、操作规范,基层雷达站技术人员容易掌握;激励放大器调试技术和方法,能解决激励放大器参数调整不当导致激励放大器性能下降故障,可有效提高新一代天气雷达技术保障水平。  相似文献   

基于OGR的勘测定界坐标数据格式转换方法研究     

周辉  李青元  郭淑芬 《测绘与空间地理信息》2016,(10)

勘测定界界址点坐标交换文件是国土资源管理工作中时常用到的一种空间数据格式,具有一般文本文件易读易改的特性,但缺少专业GIS软件应用支持,需要转换为通用的GIS数据格式才能进行更广泛的应用。为尽可能简化操作难度和降低软件购置成本,本文从底层开发的角度思考,基于OGR开源类库的运行机制总结了数据转换的技术流程,在VC++环境下开发了简单易用的数据转换工具,实现了自动转换为Shapefile文件的目标,对其他格式的GIS数据转换方法研究具有一定的借鉴意义。  相似文献