Clinoform architecture and along‐strike facies variability through an exhumed erosional to accretionary basin margin transition     

Miquel Poyatos‐Mor  George D. Jones  Rufus L. Brunt  Daniel E. Tek  David M. Hodgson  Stephen S. Flint 《Basin Research》2019,31(5):920-947

Exhumed basin margin‐scale clinothems provide important archives for understanding process interactions and reconstructing the physiography of sedimentary basins. However, studies of coeval shelf through slope to basin‐floor deposits are rarely documented, mainly due to outcrop or subsurface dataset limitations. Unit G from the Laingsburg depocentre (Karoo Basin, South Africa) is a rare example of a complete basin margin scale clinothem (>60 km long, 200 m‐high), with >10 km of depositional strike control, which allows a quasi‐3D study of a preserved shelf‐slope‐basin floor transition over a ca. 1,200 km² area. Sand‐prone, wave‐influenced topset deposits close to the shelf‐edge rollover zone can be physically mapped down dip for ca. 10 km as they thicken and transition into heterolithic foreset/slope deposits. These deposits progressively fine and thin over tens of km farther down dip into sand‐starved bottomset/basin‐floor deposits. Only a few km along strike, the coeval foreset/slope deposits are bypass‐dominated with incisional features interpreted as minor slope conduits/gullies. The margin here is steeper, more channelized and records a stepped profile with evidence of sand‐filled intraslope topography, a preserved base‐of‐slope transition zone and sand‐rich bottomset/basin‐floor deposits. Unit G is interpreted as part of a composite depositional sequence that records a change in basin margin style from an underlying incised slope with large sand‐rich basin‐floor fans to an overlying accretion‐dominated shelf with limited sand supply to the slope and basin floor. The change in margin style is accompanied with decreased clinoform height/slope and increased shelf width. This is interpreted to reflect a transition in subsidence style from regional sag, driven by dynamic topography/inherited basement configuration, to early foreland basin flexural loading. Results of this study caution against reconstructing basin margin successions from partial datasets without accounting for temporal and spatial physiographic changes, with potential implications on predictive basin evolution models.  相似文献   

多层构造油藏纵向细分计算单元对储量参数及结果的影响     

颜冠山  刘宗宾  宋洪亮  韩雪芳  王欣然 《地质与资源》2020,29(4):342-350

为满足油田中后期精细开发及后续调整挖潜的需要，亟需进行更精细的储量研究，其中最重要的一环就是纵向细分计算单元.对于多层构造油藏，纵向细分主要根据油层组内隔夹层分布特征、小层物性特征，细分到以小层或者分布特征和物性相近且纵向上连续分布的小层组合为计算单元.根据纵向细分计算单元前后储量参数选值的理论推导，结合储层的沉积展布特征，认为含油面积范围内无储层尖灭时，仅平面油层厚度差异较大的油藏平均有效厚度变小.含油面积范围内储层尖灭时，正常三角洲沉积储层的油藏各参数一般都变小；而辫状河三角洲沉积储层的油藏一般平均有效厚度变小，平均有效孔隙度和平均含油饱和度变大.这一结论可以有效指导储量评估过程中纵向细分计算单元方案划分，为同类油田的精细储量研究提供技术支撑.  相似文献   

New formulae for capacity energy-based assessment of liquefaction triggering     

Yasaman Jafariavval 《Marine Georesources & Geotechnology》2020,38(2):214-222

Abstract

Liquefaction of loose saturated soil deposits is a hazardous type of ground failure occurring under earthquake excitations. Therefore, an accurate estimation of liquefaction potential is extremely important in geotechnical engineering. In the current study, a new model is proposed which estimates the level of strain energy needed for liquefaction initiation. A compiled database containing cyclic tests gathered from previously published works was used to develop new models to predict liquefaction potential. M5′ algorithm was used to find the best correlation between parameters. It was shown that not only the derived formulas are acceptably accurate but also they feature a very simple structure in comparison with available formulas in the literature. The proposed equations are accurate, physically sound and uncomplicated. Furthermore, safety factors were given for different levels of risk, which can be useful for engineering practice. In addition, the influence of different predictors on the liquefaction potential was evaluated and also the significance of input variables was assessed via sensitivity analysis. Finally, a new model was introduced for preliminary estimation of liquefaction potential.  相似文献   

Parallelization of the flow-path network model using a particle-set strategy     

Fangli Zhang 《International journal of geographical information science》2019,33(10):1984-2010

High-performance simulation of flow dynamics remains a major challenge in the use of physical-based, fully distributed hydrologic models. Parallel computing has been widely used to overcome efficiency limitation by partitioning a basin into sub-basins and executing calculations among multiple processors. However, existing partition-based parallelization strategies are still hampered by the dependency between inter-connected sub-basins. This study proposed a particle-set strategy to parallelize the flow-path network (FPN) model for achieving higher performance in the simulation of flow dynamics. The FPN model replaced the hydrological calculations on sub-basins with the movements of water packages along the upstream and downstream flow paths. Unlike previous partition-based task decomposition approaches, the proposed particle-set strategy decomposes the computational workload by randomly allocating runoff particles to concurrent computing processors. Simulation experiments of the flow routing process were undertaken to validate the developed particle-set FPN model. The outcomes of hourly outlet discharges were compared with field gauged records, and up to 128 computing processors were tested to explore its speedup capability in parallel computing. The experimental results showed that the proposed framework can achieve similar prediction accuracy and parallel efficiency to that of the Triangulated Irregular Network (TIN)-based Real-Time Integrated Basin Simulator (tRIBS).  相似文献   

基于GPU加速的Boussinesq类波浪传播变形数值模型     

孙家文  朱桐  房克照  刘忠波 《海洋工程》2020,38(2):111-119

Boussinesq波浪模型是一类相位解析模型,在时域内求解需要较高的空间和时间分辨率以保证计算精度。为提高计算效率,有必要针对该类模型开展并行算法的研究。与传统的中央处理器(CPU)相比,图形处理器(GPU)有大量的运算器,可显著提高计算效率。基于统一计算设备架构CUDA C语言和图形处理器,实现了Boussinesq模型的并行运算。将本模型的计算结果同CPU数值模拟结果和解析解相比较,发现得到的结果基本一致。同时也比较了CPU端与GPU端的计算效率,结果表明,GPU数值模型的计算效率有明显提升,并且伴随数值网格的增多,提升效果更为明显。  相似文献   

结合云计算与大数据的出租房消防安全监管GIS     

徐刚  杨立博  裴政皓  陈杰 《测绘通报》2019,(8):121-124,157

我国城镇化进程和经济发展效果卓著，但消防建设规划与城市扩张发展之间并不协调。虽然现有研究已经运用GIS技术到消防安全监管当中，但依然存在信息联动性不强，可视化程度低的问题。为此，本文基于地理信息系统技术对城市开发区内地理信息数据、多源多时态遥感及航空影像、巡查数据、出租房数据等进行有效整合完善，以建立时空地理信息大数据。笔者利用虚拟化、云计算等技术建立出租房消防安全动态监管平台。此平台为管理部门提供了基于地理信息的决策支持，提升了出租房管理的高效性和科学性。系统的建成和应用对我国的出租房管理信息化工作的开展具有重要意义。  相似文献   

Boussinesq相位解析的海岸水动力学数学模型研究进展     

张尧  谢欣  陶爱峰  王岗  陈新平  郑金海 《海洋通报》2018,(5):481-493

由于在平衡计算效率和精度上具有优势,Boussinesq相位解析数学模型研究不断取得突破,已成为波浪和水流精细化模拟的较优解析方式,为海岸工程、环境、地质等问题提供了实用和高效的研究手段。本文对已有Boussinesq类模型的研究进行了评述,深入探讨其重要发展、实际应用和理论瓶颈,从高阶非静压修正、GPU准三维高性能算法编译、波浪破碎和泥沙运移沉积等4个方面提出未来可能的科学突破方向。  相似文献   

Leveraging parallel spatio-temporal computing for crime analysis in large datasets: analyzing trends in near-repeat phenomenon of crime in cities     

Jayakrishnan Ajayakumar  Eric Shook 《International journal of geographical information science》2020,34(9):1683-1707

ABSTRACT

Crime often clusters in space and time. Near-repeat patterns improve understanding of crime communicability and their space–time interactions. Near-repeat analysis requires extensive computing resources for the assessment of statistical significance of space–time interactions. A computationally intensive Monte Carlo simulation-based approach is used to evaluate the statistical significance of the space-time patterns underlying near-repeat events. Currently available software for identifying near-repeat patterns is not scalable for large crime datasets. In this paper, we show how parallel spatial programming can help to leverage spatio-temporal simulation-based analysis in large datasets. A parallel near-repeat calculator was developed and a set of experiments were conducted to compare the newly developed software with an existing implementation, assess the performance gain due to parallel computation, test the scalability of the software to handle large crime datasets and assess the utility of the new software for real-world crime data analysis. Our experimental results suggest that, efficiently designed parallel algorithms that leverage high-performance computing along with performance optimization techniques could be used to develop software that are scalable with large datasets and could provide solutions for computationally intensive statistical simulation-based approaches in crime analysis.  相似文献   

基于大数据的地震损失价值评估模型设计          下载免费PDF全文

张加庆 《地震工程学报》2018,40(2):356-362

破坏性地震往往导致严重的经济损失及人员伤亡,对地震损失价值评价有助于震前找出抗震弱点,提高抗震能力,实现减轻地震灾害损失的目的。传统空间模型在地震数据处理过程中,无法处理大数据对空间尺度选择的干扰,存在地震损失评估结果偏差大以及波动性高的弊端。因此,在云计算平台下,提出基于大数据的地震损失价值评估模型设计,对模型HAZ-China大数据的服务层次、地震应用服务层以及HAZ-China大数据体系结构进行设计,为用户提供震前、震时以及震后的地震损失价值评估服务。模型采用HBase分布式数据库实现大数据的存储和分析,设计房屋震害数据库以及云计算模型,通过考虑大数据因素的地震灾害损失综合评估过程,实现地震损失价值的准确评估。实验结果说明,所设计模型可实现地震损失价值的准确评估,具有较高的评估精度和稳定性。  相似文献   

基于计算机视觉的头足类角质颚特征研究Ⅰ:轮廓与特征点提取     

贺芊菡  孙翁杰  刘必林  孔祥洪  林龙山 《海洋与湖沼》2020,51(6):1493-1500

轮廓与特征点研究是头足类角质颚形态特征鉴别的基本方法，对于轮廓与特征点的提取最常用的方法是手动描绘与标定，利用计算机视觉进行轮廓与特征点的提取，不仅可以降低手动提取带来的误差、提高准确性，而且更加快速、便捷。文章将利用计算机视觉提取头足类角质颚的轮廓与特征点，首先将自制装置拍摄得到的角质颚三视图放入MTALAB软件中进行编程处理，然后利用Canny算法提取角质颚轮廓，最后根据地标点的定义标定特征点位置并建立空间坐标系得到角质颚的特征点坐标。研究结果显示，利用计算机视觉提取角质颚的轮廓图像以及特征点坐标是可行的，当标准差σ取值为0.1时角质颚轮廓图效果最佳，在得到的轮廓图上进行特征点的标定，通过迭代遍历轮廓图获得各个特征点的空间坐标。研究分析认为，将计算机视觉应用于头足类角质颚形态学的研究可以提高研究的便捷性，同时也为后续的研究提供了新的实验思路和方法。  相似文献