A two-layer model for studying 2D dissolved pollutant runoff over impermeable surfaces     

Taotao Zhang  Yang Xiao  Dongfang Liang  Hongwu Tang  Junzeng Xu  Saiyu Yuan  Nairu Wang  Bin Luan 《水文研究》2021,35(5):e14152

Dissolved pollutants in stormwater are a main contributor to water pollution in urban environments. However, many existing transport models are semi-empirical and only consider one-dimensional flows, which limit their predictive capacity. Combining the shallow water and the advection–diffusion equations, a two-dimensional physically based model is developed for dissolved pollutant transport by adopting the concept of a ‘control layer’. A series of laboratory experiments has been conducted to validate the proposed model, taking into account the effects of buildings and intermittent rainfalls. The predictions are found to be in good agreement with experimental observations, which supports the assumption that the depth of the control layer is constant. Based on the validated model, a parametric study is conducted, focusing on the characteristics of the pollutant distribution and transport rate over the depth. The hyetograph, including the intensity, duration and intermittency, of rainfall event has a significant influence on the pollutant transport rates. The depth of the control layer, rainfall intensity, surface roughness and area length are dominant factors that affect the dissolved pollutant transport. Finally, several perspectives of the new pollutant transport model are discussed. This study contributes to an in-depth understanding of the dissolved pollutant transport processes on impermeable surfaces and urban stormwater management.  相似文献   

Numerical Simulation of Magnetic Reconnection Driven by the Laser Helmholtz Capacitor-coil Targets     

XU Shan-shan  MEI Zhi-xing  ZHONG Jia-yong  LIN Jun 《Chinese Astronomy and Astrophysics》2021,45(2):131-146

  相似文献   

How soil texture,channel shape and cross-sectional area affect moisture dynamics and water loss in irrigation channels     

Zhifan Mu  Tianxiao Li  Dong Liu  Qiang Fu  Renjie Hou  Qinglin Li  Yi Ji  Song Cui  Mo Li 《水文研究》2021,35(4):e14155

To enhance the utilization efficiency of farmland irrigation water and reduce the leakage of water conveyance channels, the leakage process of channels was simulated dynamically. The simulated results were compared with data measured in laboratory experiments, and the performance of the model was evaluated. The results indicated that the simulated values of the model were consistent with the observation values, and the R² values varied between 0.91 and 0.99. In addition, based on the laboratory experiments, a water supply system (Mariotte bottles) and soil box were built using plexiglass. Three influencing factors, namely, the channel form, soil texture and channel cross-sectional area, were varied to observe and calculate the resulting cumulative infiltration amount, infiltration rate and wetting front migration distance. HYDRUS-3D software was used to solve the three-dimensional soil water movement equation under different initial conditions. The results demonstrated that the U-shaped channel was more effective than the trapezoidal channel in increasing the utilization efficiency of the water resources. A U-shaped channel with a small channel cross-sectional area should be adopted and the soil particle size should be prioritized in the construction of water conveyance channels for farmlands. The simulation results were in agreement with the observed results, which indicates that HYDRUS-3D is a reliable tool that can accurately simulate the soil moisture movement in water conveyance channels. The research results can provide a reference for the design and operation of farmland irrigation systems.  相似文献   

Large debris flows in Chosica,Lima, Peru: the application of hydraulic infrastructure for erosion control and disaster prevention     

S. P. Villacorta  K. G. Evans  K. Nakatani  I. Villanueva 《Australian Journal of Earth Sciences》2020,67(3):425-436

Abstract

Large debris flows in steep-sloped ravines debouching to the Rimac River, in metropolitan Lima (Peruvian capital), have resulted in considerable loss of life and property adversely impacting communities in the region. Temporal, spatial and volumetric features of debris flows are difficult to predict, and it is of utmost importance that achievable management solutions are found to reduce the impact of these catastrophic events. The emotional and economic toll of these debris flows on this increasingly densely populated capital city in South America is devastating where communities must live in such inadequate and dangerous conditions. To address this problem, the application of advanced Japanese technology, Sustainable Actions Basin Orientation (SABO), has been investigated using a geomorphological modelling to develop an implementation plan. Rayos de Sol stream basin in Chosica, was selected as a pilot to develop the proposal, as it is considered high risk due to the presence of ancient debris flows and recent flows in 2012, 2015 and 2017. The recurrence of debris flows in this location has resulted in numerous deaths and catastrophic property losses. This study combines geologic and geomorphic mapping and hydraulic and landform evolution numerical modelling. The implementation of a SABO Master Plan based on the multidisciplinary assessment hazard scenarios, will allow the implementation of feasible mitigation actions. The SABO technology has been applied successfully in Japan and other countries in areas with steep short slopes, similar to the conditions surrounding the Peruvian capital. Results from this study will be presented to the Peruvian Government as part of an action plan to manage debris-flow impact.

1. KEY POINTS

2. High-risk mass slope failure is linked to poor urban planning in urban developing regions of Lima the capital of Peru.

3. A multidisciplinary study including geotechnical and hydrological analysis, engineering design, and socio-economic research is required to implement a SABO Master Plan, and this basin is pilot study basin.

4. At the present time, a maintenance programme for existing hydraulic structures should be implemented, and a flood risk management plan developed may propose the relocation of some communities and infrastructure.

  相似文献   

基于能量原理的粘滞阻尼器附加阻尼系数分配方法研究          下载免费PDF全文

王子龙  任文杰  杨新磊  陈博文 《世界地震工程》2020,(3):027-37

以线性粘滞阻尼器加固剪切型规则框架结构为研究对象，基于能量原理提出附加阻尼系数正比于层间位移平方的分配方式。以六层和十二层钢筋混凝土框架为例，以确保结构在中震时保持弹性状态为设计目标，分别采用附加阻尼系数正比于层间位移平方的分配方式以及现有的分配方式，对结构进行消能减震设计。计算结果表明:有控结构均满足中震不坏的要求，层间位移角限值均未超过1/550，减震效果良好；附加阻尼系数正比于层间位移平方的分配方式得出的总阻尼系数最小，为最经济的设计结果。  相似文献   

First Multi‐Isotopic (Pb‐Nd‐Sr‐Zn‐Cu‐Fe) Characterisation of Dust Reference Materials (ATD and BCR‐723): A Multi‐Column Chromatographic Method Optimised to Trace Mineral and Anthropogenic Dust Sources     

Aubry Vanderstraeten  Steeve Bonneville  Stefania Gili  Jeroen de Jong  Wendy Debouge  Philippe Claeys  Nadine Mattielli 《Geostandards and Geoanalytical Research》2020,44(2):307-329

Atmospheric dust is an integral component of the Earth system with major implications for the climate, biosphere and public health. In this context, identifying and quantifying the provenance and the processes generating the various types of dust found in the atmosphere is paramount. Isotopic signatures of Pb, Nd, Sr, Zn, Cu and Fe are commonly used as sensitive geochemical tracers. However, their combined use is limited by the lack of (a) a dedicated chromatographic protocol to separate the six elements of interest for low‐mass samples and (b) specific reference materials for dust. Indeed, our work shows that USGS rock reference materials BHVO‐2, AGV‐2 and G‐2 are not applicable as substitute reference materials for dust. We characterised the isotopic signatures of these six elements in dust reference materials ATD and BCR‐723, representatives of natural and urban environments, respectively. To achieve this, we developed a specific procedure for dust, applicable in the 4–25 mg mass range, to separate the six elements using a multi‐column ion‐exchange chromatographic method and MC‐ICP‐MS measurements.  相似文献   

《古地理学报》的立体办刊模式          下载免费PDF全文

李新坡  张西娟  郑秀娟 《古地理学报》2020,22(6):1233-1234

网络技术为科技期刊的发展提供了动力和渠道,促进了《古地理学报》办刊模式的转变。通过建立独立网站、为读者提供多样化的文章获取渠道、多样化的沟通方式、个性化的文章精准推送、加入OSID开放科学计划等,逐步形成了适应期刊发展的立体办刊模式。  相似文献   

甘肃北山老金厂金矿床载金矿物特征、原位硫同位素组成及其对成矿的指示意义     

黄式庭  于晓飞  吕志成  刘家军  李永胜  杜泽忠  吕鑫  孙海瑞  杜轶伦 《吉林大学学报(地球科学版)》2020,50(5):1387-1403

老金厂金矿床是北山成矿南带最具代表性的中低温岩浆热液型金矿床之一，其规模为中型。依据脉体穿插、矿物共生组合和矿石结构构造等特征，将矿床矿化作用过程划分为石英-黄铁矿阶段（Ⅰ）、石英-含砷黄铁矿-毒砂阶段（Ⅱ）、石英-黄铁矿-多金属硫化物阶段（Ⅲ）和石英-方解石阶段（Ⅳ）。利用电子探针研究了不同成矿阶段载金矿物的元素组成及其分布规律。Ⅰ阶段：黄铁矿以粗粒自形立方体为主，粒度为0.50~1.50 mm，贫As、Au；毒砂含量极少，呈细粒他形。Ⅱ阶段：含砷黄铁矿周围常有大量毒砂产出，含砷黄铁矿多为立方体、五角十二面体，粒度为0.30~1.00 mm，富As、Au；该阶段矿化最为强烈，毒砂主要形成于此时期，多呈棱柱状、柱状、放射状集合体，显示富S亏As特征。Ⅲ阶段：多以黄铁矿-黄铜矿-闪锌矿共生组合脉的形式产出，黄铁矿多呈长条状，以富S、Cu、Zn、Au和贫Fe、As为特征。Ⅳ阶段：矿化作用极弱，毒砂、黄铁矿含量极少，为细粒他形。原位硫同位素组成显示：Ⅰ阶段黄铁矿δ³⁴S_V-CDT值为-3.8‰~-2.9‰，均值为-3.3‰；Ⅱ阶段黄铁矿和毒砂δ³⁴S_V-CDT值为-4.7‰~2.6‰，均值为-3.3‰；Ⅲ阶段黄铁矿和闪锌矿δ³⁴S_V-CDT值主要分布于-1.9‰~1.0‰之间，均值为0.1‰。此3个阶段硫同位素组成反映了成矿期硫主要来源于幔源岩浆，混入了部分地层硫。综合前人研究成果，认为成矿早期至晚期，成矿流体总体上由富S贫As向富As贫S演化。Ⅰ阶段体系处于中性稳定的环境，硫源充足；Ⅱ阶段为贫S富As的高氧逸度环境，由于大气降水对地层的淋滤渗透，混入富As流体，Au可能与As结合形成Au-As络合物，在成矿有利部位富集沉淀；Ⅲ阶段成矿元素种类丰富，体系为富S贫As的弱还原环境，Au很可能与HS^-、S^-形成络合物进入黄铁矿晶格。  相似文献   

地缘政治视角下中亚“颜色革命”易发程度分析     

李希雅  王礼茂 《世界地理研究》2019,28(6):42-49

基于地缘政治视角，分析本世纪初发生在原苏联地区“颜色革命”的诱发因素，认为美国根据其地缘战略格局对“颜色革命”发生地存在一定程度的主观选择性，国家内部经济、政治、社会等层面的矛盾也同样作为发生背景。在中亚地缘格局动态分析的基础上，结合中亚五国形势，从时间和空间双重维度对中亚地区未来发生“颜色革命”的可能性进行识别与评判，得出1) 整体来看，中亚近期内爆发“颜色革命”可能性较小，但从长远来看不能掉以轻心。2)土、乌未来稳定可期，塔、吉、哈需谨防“颜色革命”卷土重来。  相似文献   

利用InSAR资料反演宁洱Ms6.4地震震源参数及库仑应力变化     

陈晨月  冯光财  高华  杨怀宁 《大地测量与地球动力学》2019,39(3):295-301

首先利用ALOS PALSAR数据，通过D-InSAR技术获取2007-06-03云南宁洱MS6.4地震的同震形变场，然后基于Okada弹性半空间位错模型反演该地震的断层几何以及精细滑动分布，最后计算宁洱地震后周边断层的静态库仑应力变化。结果表明，形变主要集中在西盘，最大视线向形变量为51.6 cm；反演得到的震源位置为23.05°N、101.02°E，深度3 km，断层走向145°，倾向49.5°，平均滑动角153°，发震断层为NNW向普洱断裂，断层活动以右旋走滑为主，兼具逆冲分量；断层面最大滑动量为1.2 m，反演得到的震级为MW619。基于库仑应力场发现，磨黑断裂处于库仑应力增加区域，而2014年景谷地震位于负值区域。结合实地考察资料和反演结果表明，宁洱地震为浅源地震，但断层并未出露地表。  相似文献