Exploring the stemflow dynamics and driving factors at both inter- and intra-event scales in a typical subtropical deciduous forest     

Haixia Zhang  Congsheng Fu  Aimin Liao  Can Zhang  Jiufu Liu  Niu Wang  Bin He 《水文研究》2021,35(3):e14091

Numerous efforts have been made to understand stemflow dynamics under different types of vegetation at the inter-event scale, but few studies have explored the stemflow characteristics and corresponding influencing factors at the intra-event scale. An in-depth investigation of the inter- and intra-event dynamics of stemflow is important for understanding the ecohydrological processes in forest ecosystems. In this study, stemflow volume (F_V), stemflow funnelling ratio (F_R), and stemflow ratio (F_%) from Quercus acutissima and Broussonetia papyrifera trees were measured at both inter- and intra-event scales in a subtropical deciduous forest, and the driving factors, including tree species and meteorological factors were further explored. Specifically, the F_V, F_R and F_% of Q. acutissima (52.3 L, 47.2, 9.6%) were lower than those of B. papyrifera (85.1 L, 91.2, 12.4%). The effect of tree species on F_V and F_% was more obvious under low intensity rainfall types. At the inter-event scale, F_V had a strong positive linear correlation with rainfall amount (G_P) and event duration (D_E) for both tree species, whereas F_R and F_% had a positive logarithmic correlation with G_P and D_E only under high-intensity, short-duration rainfall type. F_R and F_% were mainly affected by wind speed and the maximum 30-min rainfall intensity under low-intensity, long-duration rainfall type. At the intra-event scale, for both tree species, the mean lag time between the start of rainfall and stemflow was the shortest under high-intensity, short-duration rainfall type, while the mean duration and amount of stemflow after rain cessation were the greatest under high-amount, long-duration rainfall type. The relationship between stemflow intensity and rainfall intensity at the 5-min interval scale also depended greatly on rainfall type. These findings can help clarify stemflow dynamics and driving factors at both inter- and intra-event scales, and also provide abundant data and parameters for ecohydrological simulations in subtropical forests.  相似文献   

黄土洞室掘进深度与围岩位移变化规律研究     

时卫民  王鹏  赵尚毅 《岩土工程技术》2020,(2):70-75

应用PLAXIS 2D/3D有限元分析软件,对某黄土洞室进行了二维、三维分步掘进、三维一次掘进等工况的弹塑性有限元分析,研究分析了不同工况下洞室围岩位移的变化规律,并对掌子面的空间效应进行了分析。分析结果表明,二维与三维分步计算的最终位移基本一致,可以用二维的计算结果来估算洞室开挖的最终位移。三维分步掘进的分析表明,不同埋深的洞室其位移比的变化规律基本一致,当L/B<1时(L为掘进深度,B为洞室跨度),位移比呈线性增加;当L/B>1时,位移比呈非线性增加;当L/B>3时,其最大位移接近最终位移。掌子面的空间效应分析表明,在掌子面处的位移约为最终位移的1/3,距掌子面0.5倍跨度处的位移约为最终位移的2/3,距掌子面2.5倍跨度处的位移基本达到了最终位移。  相似文献   

Undrained lower bound solutions for end bearing capacity of shallow circular piles in non-homogeneous and anisotropic clays     

Boonchai Ukritchon  Suraparb Keawsawasvong 《国际地质力学数值与分析法杂志》2020,44(5):596-632

The undrained bearing capacity of shallow circular piles in non-homogeneous and anisotropic clay is investigated by the lower bound (LB) finite element limit analysis (FELA) under two-dimensional (2D) axisymmetric condition using second-order cone programming, and the new solution of the problem is presented. Modified from the isotropic von Mises yield criterion, a cross-anisotropic undrained strength criterion of clays under the axisymmetric state of stress requiring three input shear strengths in triaxial compression, direct simple shear, and triaxial extension is employed in the 2D axisymmetric LB FELA. Parametric studies on the effects of pile embedment ratio, dimensionless strength gradient, anisotropic strength ratio, and pile roughness are investigated extensively, while the predicted failure mechanisms associated with these parameters are discussed and compared. Numerical results of undrained end bearing capacity of shallow circular piles are summarized in the form of design tables that are useful for design practice and represent a new contribution to the field of pile capacity considering the combined effects of undrained strength non-homogeneity and anisotropy.  相似文献   

Fully coupled hydraulic fracture simulation using the improved element partition method     

Shujun Peng  Zhennan Zhang  Jianye Mou  Bing Zhao  Zhiyuan Liu  Jiading Wang 《国际地质力学数值与分析法杂志》2019,43(1):441-460

The improved element partition method (IEPM) is a newly developed fracture simulation approach. IEPM allows a fracture to run across an element without introducing extra degrees of freedom. It can also simulate any number of fractures in a prescribed mesh without remeshing. In this study, the IEPM is extended to hydraulic fracture simulation. First, the seepage and volumetric storage matrix of a cracked element are derived using virtual nodes (the intersection points of a crack with element edges). Subsequently, the fully coupled hydromechanical equation is derived for this cracked element. To eliminate the extra degrees of freedom (virtual nodal quantities), the water pressure and displacement of the virtual nodes are associated with their adjacent nodes through least squares interpolation. Finally, the fully coupled equation in terms of nodal quantities is obtained. The verification cases validate the method. By using this method, the field-scale hydraulic fracturing process is well simulated. The proposed approach is simple and efficient for field-scale hydraulic fracture simulation.  相似文献   

Quantitative prediction of discrete element models on complex loading paths     

Luc Sibille  Pascal Villard  Félix Darve  Rodaina Aboul Hosn 《国际地质力学数值与分析法杂志》2019,43(5):858-887

The ability of discrete element models to describe quantitatively (and not only qualitatively) the constitutive behaviour of a dense sand is assessed in this paper. Two kinds of 3D discrete models are considered. Both consider spheres as elementary particles. Nevertheless, the first model implements a contact law with rolling resistance whereas the second takes into account clumps made of two spheres. The discrete models are calibrated and validated from mechanical tests performed on a dense Hostun sand with a true triaxial apparatus. The calibration is carried out from axisymmetric drained compression tests, while the validation is discussed from monotonic and cyclic stress proportional loading paths and from a circular stress path in the deviatoric stress plane. The quality of the predictions of the discrete models are evaluated by comparison with the predictions given with advanced phenomenological constitutive relations, mainly an incrementally non-linear relation. Predictions given by the discrete models are remarkable, particularly when it is put in perspective with respect to the very few number of mechanical tests required for their calibration. However, these results and conclusions were reached in enabling conditions, and some limitations of such discrete models should be kept in mind.  相似文献   

GBW10010a大米标准物质复(研)制及数据特征     

杨榕  顾铁新  潘含江  刘妹  周国华 《岩矿测试》2020,39(6):866-877

随着我国对生态文明建设的重视，自然资源综合调查势在必行，对生物标准物质亦提出了新的需求。当前相关调研工作已经大面积开展，自然资源综合调查、农产品与食品安全评价都需要对生物样品元素组成进行准确测试，需要以生物标准物质作为生物成分测试量值比对和溯源的基础，因此对生物基体标准物质的需求量大幅增加。大米作为主要粮食之一，其食品安全日益受到重视，对大米中的化学成分进行准确的分析测试具有重要的现实意义，因而对大米标准物质的需求量尤为突出，但目前大米成分分析标准物质已供不应求。本文严格按照《标准物质定值的通用原则及统计学原理》（JJF 1343—2012）和《地质分析标准物质的研制》（JJF 1646—2017）等相关规范要求，开展了GBW10010a大米成分分析标准物质的复（研）制工作，包括样品采集、加工制备、均匀性检验、稳定性检验、多家实验室协作定值测试及不确定度评定等关键环节。结果表明：本次复（研）制的大米标准物质定值成分多样、量值准确可靠，符合国家一级标准物质的要求。GBW10010a共定值54项主微量元素，包括Ag、Al、As、B、Ba、Be、Bi、Ca、Cd、Ce、Co、Cr、Cs、Cu、Dy、Er、Eu、Fe、Gd、Ge、Hg、Ho、K、La、Li、Ho、Mg、Mn、Mo、N、Na、Nb、Nd、Ni、P、Pb、Pr、Rb、S、Sb、Sc、Se、Si、Sm、Sr、Tb、Th、Tl、Tm、U、V、Y、Yb、Zn，其中的39项元素给出了标准值及不确定度，包括Ag、Al、As、B、Ba、Ca、Cd、Ce、Co、Cs、Cu、Dy、Er、Fe、Hg、K、Li、Mg、Mn、Mo、N、Na、Nd、Ni、P、Pb、Pr、Rb、S、Sb、Se、Si、Sm、Sr、Tb、Tl、Y、Yb、Zn；15项元素提供参考值，包括Be、Bi、Cr、Eu、Gd、Ge、Ho、Ho、La、Nb、Sc、Th、Tm、U、V。与原有GBW10010大米标准物质相比较，GBW10010a中As、Cd、Co、Cr、Cu、Hg、Mn、Mo、Ni、Zn等重金属元素含量显著下降，其中Cd、Cu、Zn降幅较大，分别下降约39%、43%、38.7%，一定程度上反映了农田生态环境的改善。本批标准物质定值元素总数量增加了6项，新增定值元素Ag、Nb（Nb给出参考值），并且各项元素不确定度范围整体上有所缩小，如Al、Cd、Cu、Fe、K、Mg、Mo、Na、P、Pb、Se、Zn等对生物易有影响的重要元素，表明了地质分析测试方法技术的进步及定值水平的提高。本批标准物质定值元素涵盖了具有生物效应的大部分主微量元素，适用于农业生态环境地球化学调查与评价、生物样品测试、农产品质量与食品安全评价样品测试时的分析仪器校正、分析方法评价和分析质量监控等多个领域。  相似文献   

晋西北地区表层土壤粒度与地球化学元素组成   总被引：1，自引：1，他引：0  

李继彦  周玲  刘益  张倩  蔡莹莹  张宝贵 《中国沙漠》2019,39(5):155-162

对晋西北地区表层土壤的物质组成进行研究，可以明确其物质来源、沉积环境及化学风化特征。选择区内表层土壤（深度0、10、20 cm）及其附近的河流沉积物，进行粒度和化学元素组成测试。结果表明：（1）晋西北地区表层土壤粒度组成以黏土和粉沙为主，且有自地表向下粗颗粒组分含量增加的趋势。（2）常量化学元素组成以SiO₂、Al₂O₃、CaO、Fe₂O₃为主，其余元素含量均较低。化学元素组成模式表明研究区内表层土壤物质与黄土高原腹地黄土有相同的物质源区，黄河河流沉积物对其贡献不大。（3）晋西北表层土壤的CIA值为52.70~57.89，平均54.06，说明它们的化学风化程度较低，处于早期的脱Na、Ca阶段。这是由于研究区地理位置比洛川更靠北，气温和降水量均低于洛川，降水量与兰州相差不大，但是年平均气温和年温差比兰州低。该研究明确了晋西北地区表层土壤的物质组成特征，为区域潜在沙漠化危害防治提供了数据支撑。  相似文献   

微量元素分析在判别沉积环境中的应用——以柴达木盆地西部锶矿区富锶地层为例          下载免费PDF全文

年秀清  韩凤清  韩继龙  毛庆飞  马喆 《盐湖研究》2019,27(1):66-72

沉积岩中的微量元素对沉积环境水介质的变化较为敏感,是研究沉积物沉积时古气候、古环境的有效手段。选取了对沉积环境介质较为敏感的锶(Sr)、钡(Ba)、铜(Cu)、铀(U)、钒(V)、镍(Ni)、钍(Th)等元素作为判别指标,对柴达木盆地西部上新统油砂山组、狮子沟组和更新统七个泉组三套富锶岩层的古气候和古沉积环境特征进行了研究。结果表明,柴达木盆地西部从油砂山组到七个泉组沉积时总体上为干旱的气候环境;湖盆水体的盐度较高,表现为咸水环境,且从油砂山组到七个泉组随着地层变新,盐度有逐渐增大的趋势;油砂山组、狮子沟组和七个泉组沉积时湖盆水体均表现为中等分层、湖水循环较为顺畅的氧化环境。  相似文献   

Anthropogenic impact in the Maya Lowlands of Petén,Guatemala, during the last 5500 years          下载免费PDF全文

D. Battistel  M. Roman  A. Marchetti  N. M. Kehrwald  M. Radaelli  E. Balliana  G. Toscano  C. Barbante 《第四纪科学杂志》2018,33(2):166-176

  相似文献   

Revisiting the existence of an effective stress for wet granular soils with micromechanics          下载免费PDF全文

Jérôme Duriez  Richard Wan  Mehdi Pouragha  Félix Darve 《国际地质力学数值与分析法杂志》2018,42(8):959-978

A possible effective stress variable for wet granular materials is numerically investigated based on an adapted discrete element method (DEM) model for an ideal three‐phase system. The DEM simulations consider granular materials made of nearly monodisperse spherical particles, in the pendular regime with the pore fluid mixture consisting of distinct water menisci bridging particle pairs. The contact force‐related stress contribution to the total stresses is isolated and tested as the effective stress candidate for dense or loose systems. It is first recalled that this contact stress tensor is indeed an adequate effective stress that describes stress limit states of wet samples with the same Mohr‐Coulomb criterion associated with their dry counterparts. As for constitutive relationships, it is demonstrated that the contact stress tensor used in conjunction with dry constitutive relations does describe the strains of wet samples during an initial strain regime but not beyond. Outside this so‐called quasi‐static strain regime, whose extent is much greater for dense than loose materials, dramatic changes in the contact network prevent macroscale contact stress‐strain relationships to apply in the same manner to dry and unsaturated conditions. The presented numerical results also reveal unexpected constitutive bifurcations for the loose material, related to stick‐slip macrobehavior.  相似文献