基于核酸适配体功能化石墨纳米颗粒荧光探针的17β-雌二醇快速检测方法     

朴云仙  祁小丽  王湘  康博泉  史玉玺  胡慧  杨悦锁 《吉林大学学报(地球科学版)》2019,49(4):1137-1144

为构建一种能够简单、快速、特异性检测复杂环境水体中雌激素污染的方法，利用石墨纳米颗粒作为荧光淬灭剂、核酸适配体作为识别元素、1-芘丁酸N-羟基琥珀酰亚胺酯作为异型双功能交联剂，构建了一种新型纳米荧光探针；并探究了构建荧光探针时核酸适配体初始投加量和荧光探针投加量对雌二醇检测的影响及最佳实验条件下检测雌二醇的效果和特异性。实验结果表明：核酸适配体能成功修饰在石墨纳米颗粒表面形成的稳定荧光探针；构建荧光探针时核酸适配体的最佳初始投加量为1.0 μmol/L；检测雌二醇时，荧光探针的最佳投加量为4 μg/mL；最佳实验条件下，相对荧光强度与雌二醇的质量浓度在50~800 ng/mL范围内成正比，最低检测限为34.5 ng/mL，且该荧光探针能实现对雌二醇的简单、快速、特异性检测。  相似文献   

利用偏光显微镜反射光系统观察黑色生油岩电子探针薄片中的生烃母质特征     

郑庆华  刘行军  刘乔  梁秀玲  张小龙  左琴  杨开艳  马婷  许锋 《岩矿测试》2020,39(3):442-450

鄂尔多斯盆地上三叠统延长组长7油层组的黑色泥岩、油页岩等黑色生油岩薄片中的生烃母质,因黑色石油、沥青等黑色有机质的覆盖或不透明,导致其在偏光显微镜透射光系统下观察常局部或整体呈现为黑色。因此,建立一种黑色生油岩薄片中生烃母质有效观察的方法,对致密油、页岩油的生烃研究具有重要的理论和实际意义。本文提出了一种利用电子探针薄片和偏光显微镜的反射光系统观察黑色生油岩中生烃母质特征的方法。该方法能够克服黑色生油岩薄片中生烃母质因被黑色有机质覆盖或不透明,而在偏光显微镜的透射光系统下局部或整体呈黑色的弊端,能够对生烃母质的大小、形态、结构、分布和物质成分等特征进行整体且清晰的观察。实践表明,本文提出的利用偏光显微镜反射光系统观察黑色生油岩电子探针薄片中生烃母质特征的方法,简单有效,易在致密油、页岩油的生烃研究领域推广使用。  相似文献   

能力培养为导向的实践课程改革与设计     

刘亚文  王玥  段延松 《测绘通报》2020,(4):152-156

大学实践课程是培养学生创新、创业实践能力的重要环节，本文在新工科实验课程建设中，提出了以能力培养为导向的实践课程设计思路，旨在培养适应当今新技术、新产业、新模式快速变革时代的创新性工程科技人才。本文将传统的验证性实践课程调整为“目标设定、方案规划及实施”的设计型实验课程，强调学生在实践中的主体地位，遵循实践能力培养的规律，引导学生在实践中重参与、重思考、重实施、重过程。同时，将行业的最新发展、最新变革反映在实践教学课程中，增加了新型传感器及混合云人机协作数据处理平台，确保学生获取的知识和技术与快速发展的行业水平相接轨。本文以摄影测量实习课程改革为例，实践证明，课程的实施对于培养学生综合分析设计、创造性解决专业问题的能力取得了较好的效果。  相似文献   

基于连续帧间差分的抛弃式探头三维下沉运动处理方法研究     

陈振涛  刘凤  王晓蕾  罗文 《海洋技术学报》2018,(2):7-12

抛弃式探头由无人机装载,能够在较远目标区域和危险海域开展海洋水文环境剖面参数的测量。通过安装不同传感器,可以实现对温度、盐度的剖面测量,其深度的测量采用数学方法计算得到。针对双摄像机水箱实验获得的5个不同攻角实验结果,分析了常用的运动目标的检测方法,最终选择基于连续帧间差分法,确定探头的三维坐标位置,进而得到探头下沉运动的三维运动轨迹和速度曲线等信息。探头从水面释放后攻角在下沉过程中不断调整,改变运动姿态,同时伴随自身的旋转,抵消水平方向阻力作用,初始攻角产生的深度测量误差主要体现在加速过程,探头达到匀速运动后测量误差不变,在不考虑横流的情况下,探头最后以匀速垂直下落运动。  相似文献   

Effect of different registration methods on precision of orientation based on RTK registration/georeferencing mode     

Shengming Hu  Zhijian Chen  Chenghui Wan  Chun Tang  Wen Xiong 《Marine Georesources & Geotechnology》2020,38(4):385-392

Abstract

Compared with traditional methods, the three-dimensional laser-scanning (3D-LS) technique can efficiently acquire many high-quality geometric properties of rock discontinuities. In practice, engineers usually prefer to simplify the processing by using single-station point data and roughly orienting owing to the complexity of registration/georeferencing multi-station point data. However, prior published studies have paid little attention to the accuracy and reliability when determining discontinuity orientations using 3D-LS. We propose a reliable and accurate method with robust on-site applicability. As part of an ongoing effort, we are evaluating the precision of the commonly used coarse registration method and the fine registration method, and promoted the optimized coarse- and fine-registration methods and evaluated their precision. It is found that: (1) the common and the optimized registration method can meet our project’s engineering requirements, and the optimized registration method improved accuracy in the dip direction by approximately 1°; (2) fine registration using an iterative closest point (ICP) algorithm can correct both dip direction and dip angle; and (3) the orientation is of high precision with commonly used coarse and fine registration, whereas the optimization effect to correct the orientation is slightly limited.  相似文献   

‘Box‐Profile’ Ion Implants as Geochemical Reference Materials for Electron Probe Microanalysis and Secondary Ion Mass Spectrometry     

Haosheng Wu  Roman Bttger  Frdric Couffignal  Jens Gutzmer  Joachim Krause  Frans Munnik  Axel D. Renno  Ren Hübner  Michael Wiedenbeck  Ren Ziegenrücker 《Geostandards and Geoanalytical Research》2019,43(4):531-541

Although electron probe microanalysis and secondary ion mass spectrometry are widely used analytical techniques for geochemical and mineralogical applications, metrologically rigorous quantification remains a major challenge for these methods. Secondary ion mass spectrometry (SIMS) in particular is a matrix‐sensitive method, and the use of matrix‐matched reference materials (RMs) is essential to avoid significant analytical bias. A major problem is that the number of available RMs for SIMS is extremely small compared with the needs of analysts. One approach for the production of matrix‐specific RMs is the use of high‐energy ion implantation that introduces a known amount of a selected isotope into a material. We chose the more elaborate way of implanting a so‐called ‘box‐profile’ to generate a quasi‐homogeneous concentration of the implanted isotope in three dimensions, which allows RMs not only to be used for ion beam analysis but also makes them suitable for EPMA. For proof of concept, we used the thoroughly studied mineralogically and chemically ‘simple’ SiO₂ system. We implanted either ⁴⁷Ti or ⁴⁸Ti into synthetic, ultra‐high‐purity silica glass. Several ‘box‐profiles’ with mass fractions between 10 and 1000 μg g^?1 Ti and maximum depths of homogeneous Ti distribution between 200 nm and 3 μm were produced at the Institute of Ion Beam Physics and Materials Research of Helmholtz‐Zentrum Dresden‐Rossendorf. Multiple implantation steps using varying ion energies and ion doses were simulated with Stopping and Range of Ions in Matter (SRIM) software, optimising for the target concentrations, implantation depths and technical limits of the implanter. We characterised several implant test samples having different concentrations and maximum implantation depths by means of SIMS and other analytical techniques. The results show that the implant samples are suitable for use as reference materials for SIMS measurements. The multi‐energy ion implantation technique also appears to be a promising procedure for the production of EPMA‐suitable reference materials.  相似文献   

Effects of the peat acid digestion protocol on geochemically and morphologically diverse tephra deposits     

Alistair J. Monteath  Alex E. Teuten  Paul D. M. Hughes  Stefan Wastegrd 《第四纪科学杂志》2019,34(4-5):269-274

Tephra shards for electron probe microanalysis are most efficiently extracted from peat using acid digestion, which removes organic material that hinders density separation methods. However, strong acids are known to alter glass chemical compositions, and several studies have examined how acid digestion affects rhyolitic volcanic glass. The focus on rhyolitic tephra in these studies leaves considerable uncertainty, as the dissolution rates of natural glasses (including tephra) are determined by the chemical composition and surface area/volume ratio, both of which vary in tephra deposits. Here, we use duplicate samples of basaltic, trachydacitic and rhyolitic tephra to examine physical and geochemical alteration following acid digestion. Scanning electron microscope imagery reveals no discernible degradation of glass surfaces, and electron probe microanalysis results from duplicate samples are statistically indistinguishable. These findings suggest the acid digestion protocol for organic peats does not significantly alter glass geochemistry regardless of shard morphologies or geochemical compositions.  相似文献   

Rutile inclusions in garnet from a dissolution‐reprecipitation mechanism     

Shyh‐Lung Hwang  Pouyan Shen  Hao‐Tsu Chu  Tzen‐Fu Yui  Yoshiyuki Iizuka  Hans‐Peter Schertl 《Journal of Metamorphic Geology》2019,37(8):1079-1098

Metamorphic garnet commonly contains needle‐like rutile inclusions as well as equant rutile inclusions that surround quartz inclusions and range in size from submicrometer to nanometer. Although the origin of these equant rutile inclusions, that is, exsolution or non‐exsolution, has important implications for petrological and tectonic processes, the crystallographic characteristics of these inclusions have rarely been studied because of the small sizes and analytical difficulties involved. Here, we report the crystallographic characteristics pertinent to the genetic origin of minute equant rutile inclusions in cloudy, nearly spherically shaped garnet domains with Ti‐depleted compositions surrounding quartz inclusions in ultrahigh‐pressure garnet from several diamondiferous Erzgebirge quartzofeldspathic gneissic rock samples. TEM analyses show that the equant rutile crystals in cloudy garnet domains are partially bounded by the low‐energy {100}_rt ± {110}_rt ± {101}_rt facets and have rather random crystallographic orientation relationships (CORs) with the garnet host, with preferential alignment of low‐energy lattice planes, for example, {100}_rt//{112}_grt, for some rutile crystals. Although the rather random CORs are unlikely to be attributed to solid‐state exsolution subjected to the stringent topotactic garnet lattice constraints, the characteristic subhedral {100}_rt ± {110}_rt ± {101}_rt crystal forms of rutile can be rationalized by a metasomatic dissolution‐reprecipitation mechanism via a fluid phase. In this scenario, the quartz+fluid inclusions in garnet were first subjected to decompression microcracking during rock exhumation, followed by dissolution of Ti‐bearing garnet matrix at the crack tips or along the crack surfaces and subsequent reprecipitation of rutile, apatite, gahnite, akdalaite, and Ti‐depleted garnet. The rapid coalescence between rutile and garnet crystals in fluid or direct attachment of rutile crystals onto the dissolving crack surfaces would then yield the rather random CORs as reported here. These results, along with previous work on rutile needles, indicate rather diverse genesis of rutile inclusions in various crystal forms, thus shedding light on the controversial exsolution origin for other inclusion suite/microstructure in minerals.  相似文献   

The influence of bedrock orientation on the landscape evolution,surface morphology and denudation (10Be) at the Niesen,Switzerland          下载免费PDF全文

Hannah Chittenden  Romain Delunel  Fritz Schlunegger  Naki Akçar  Peter Kubik 《地球表面变化过程与地形》2014,39(9):1153-1166

Landscape evolution and surface morphology in mountainous settings are a function of the relative importance between sediment transport processes acting on hillslopes and in channels, modulated by climate variables. The Niesen nappe in the Swiss Penninic Prealps presents a unique setting in which opposite facing flanks host basins underlain by identical lithologies, but contrasting litho‐tectonic architectures where lithologies either dip parallel to the topographic slope or in the opposite direction (i.e. dip slope and non‐dip slope). The north‐western facing Diemtigen flank represents such a dip slope situation and is characterized by a gentle topography, low hillslope gradients, poorly dissected channels, and it hosts large landslides. In contrast, the south‐eastern facing Frutigen side can be described as non‐dip slope flank with deeply incised bedrock channels, high mean hillslope gradients and high relief topography. Results from morphometric analysis reveal that noticeable differences in morphometric parameters can be related to the contrasts in the relative importance of the internal hillslope‐channel system between both valley flanks. While the contrasting dip‐orientations of the underlying flysch bedrock has promoted hillslope and channelized processes to contrasting extents and particularly the occurrence of large landslides on the dip slope flank, the flank averaged beryllium‐10 (¹⁰Be)‐derived denudation rates are very similar and range between 0.20 and 0.26 mm yr^?1. In addition, our denudation rates offer no direct relationship to basin's slope, area, steepness or concavity index, but reveal a positive correlation to mean basin elevation that we interpret as having been controlled by climatically driven factors such as frost‐induced processes and orographic precipitation. Our findings illustrate that while the landscape properties in this part of the northern Alpine border can mainly be related to the tectonic architecture of the underlying bedrock, the denudation rates have a strong orographic control through elevation dependent mean annual temperature and precipitation. Copyright © 2013 John Wiley & Sons, Ltd.  相似文献   

四川雪宝顶W-Sn-Be矿床中矿物化学组成及矿床成因     

朱鑫祥  刘琰 《岩矿测试》2021,(2):296-305

雪宝顶矿床位于四川省的松潘甘孜造山带中,以出产大颗粒含W-Sn-Be-F-P的矿物而闻名,前人对该矿床已经开展了大量的研究,但缺乏对粗粒矿物的主次痕量元素研究。本次研究采用X射线荧光光谱(XRF)、电子探针(EMPA)和电感耦合等离子体质谱(ICP-MS)技术对矿床中各矿物的主次痕量元素进行测试分析。结果显示,雪宝顶矿床中的绿柱石、白钨矿、锡石、白云母、萤石、磷灰石、电气石,除富含W、Sn、Be、Na、K、Ca等主要成矿元素外,还富集Li、Rb、Cs等碱金属元素和F、B、P等挥发份。其中,雪宝顶绿柱石中富含Li(3484~4243μg/g)、Rb(39.3~71.1μg/g)、Cs(2955~3526μg/g);白云母中Li、Rb和Cs元素含量分别高达4243μg/g、72.3μg/g和3526μg/g;磷灰石中除主量元素P外,F(4.48%~5.21%)含量相对较高;电气石中的B含量高达30990~32880μg/g。雪宝顶矿床中的花岗岩岩体W、Sn、Be、Li、Rb、Cs、F、B、P等元素相对富集,但CaO含量(0.46%~0.82%)相对较低。其中Li、F、B、P等元素对成矿元素在成矿流体内的富集起到了极大的促进作用。矿区内大理岩是一种富Ca的方解石大理岩,为成矿提供了大量的Ca元素,有利于粗粒矿物的大规模沉淀。因此,粗粒矿物中的W、Sn、Be、Li、Rb、Cs、F、B、P等元素主要来源于原始岩浆流体,大理岩地层为粗粒矿物提供了大量的Ca元素。  相似文献