Geoheritage at the small scale: tidal-zone bubble-sand structures as diagnostic paleo-environmental indicators,and their geoheritage significance     

V. Semeniuk  M. Brocx 《Australian Journal of Earth Sciences》2019,66(6):913-922

In identifying sites of geoheritage significance, commonly there has been an emphasis on the larger-scale features. However, the story of geology and the significant features that are critical to unravel geological processes and geological history are commonly small in scale. This contribution focuses on bubble sand and bubble-sand structures as features that are small-scale but nonetheless important to geology, and hence are of geoheritage significance. Bubble sand and bubble-sand structures are ubiquitous on modern beaches and tidal flats, occurring in the uppermost tidal zone of sandy beaches, as a distinct layer in a shoaling beach-to-dune stratigraphy, and are a diagnostic indicator of upper-tidal conditions where a rising tide and a concomitantly rising water-table interacts with the upper swash-zone wave processes. On sandy tidal flats, bubble sand and bubble-sand structures may occur in the mid- to upper-tidal zones; here they are also diagnostic indicators of tidal conditions, forming during a rising tide where a rising water-table forces air upwards to be trapped in moist sand. If found in ancient sequences, bubble-sand structures are a powerful environmental indicator of tidal conditions and, for beach sequences, an indicator of the high-tide level and sea level. Bubble-sand structures have been found in a number of ancient sequences throughout the geological record as far back as the Neoproterozoic, e.g. within beach-to-dune stratigraphy in Pleistocene limestones of the Perth Basin and in southeastern USA, and in tidal-flat sands of the Mesozoic Broome Sandstone of the Canning Basin. The bubble-sand structure is a significant geological tool for use in paleo-environmental and paleo-oceanographic reconstructions, and determination of the position of a paleo-water-table. Given the rarity of their preservation, these occurrences of bubble-sand structures are of geoheritage significance in their own right and, depending on age of sequence and how common they are in the region, they may be nationally significant or globally significant.  相似文献   

不同厚度饱和砂土中群桩结构动力响应试验研究   总被引：2，自引：2，他引：0       下载免费PDF全文

李雨润  强东峰  邹泽  刘荟达  王海 《地震工程学报》2018,40(4):625-630

液化土中桩基础动力响应规律一直是工程抗震领域关注的热点问题。本文基于非液化砂土和不同厚度饱和砂土中的2×2群桩结构模型振动台试验,通过输入一定峰值加速度和频率的正弦波,对群桩在非液化土层和两种不同厚度饱和砂土层中的横向动力响应特性进行振动台试验研究。研究结果表明:在正弦波输入情况下,非液化砂土中群桩承台加速度和位移时程与台面输入时程相比,波形变化规律与峰值大小均相差不大;而对两种不同厚度饱和砂土中承台加速度和位移峰值放大较多,在相对较薄的饱和砂土中群桩承台加速度峰值较台面输入放大了1.83倍,较台面输出位移峰值放大了1.58倍;在相对较厚的饱和砂土中承台加速度和位移峰值则分别放大了2.18倍和1.91倍,说明在相同输入条件下,较厚的饱和砂土在发生液化后群桩承台的动力响应更加显著。  相似文献   

Effect of sand on the vacuum consolidation of dredged slurry     

Jun Wang  Yuanqiang Cai  Xueyu Geng  Fengqi Xu 《Marine Georesources & Geotechnology》2018,36(2):238-244

Vacuum preloading is often used to improve the geotechnical properties of dredged slurry. Although the performance of this method has improved with rapidly developing technology, soil columns usually formed on the drainage boundary induce the decrease of permeability around the boundary, thereby limiting the further development of this method. To address this issue, this paper proposes a method for pretreating the slurry combined with sand prior to vacuum consolidation. This method partially replaces the fine particles with sand to reduce the formation of soil columns. Two groups of vacuum preloading tests were performed to investigate the effect of sand content and sand grain size on the vacuum consolidation of dredged slurry. The test results revealed that for a given sand grain size, increasing the sand content of the sand–slurry mixture increased the pore water drainage and accelerated the dissipation of pore water pressure, thereby increasing the vane shear strength. In contrast, for a constant sand content, the samples containing coarse sand exhibited increased pore water drainage and accelerated dissipation of pore water pressure, thereby increasing the vane shear strength of the soil.  相似文献   

Offshore aeolian sediment transport across a human‐modified foredune          下载免费PDF全文

Karl F. Nordstrom  Nancy L. Jackson 《地球表面变化过程与地形》2018,43(1):195-201

Concepts derived from previous studies of offshore winds on natural dunes are evaluated on a dune maintained for shore protection during three offshore wind events. The potential for offshore winds to form a lee‐side eddy on the backshore or transfer sediment from the dune and berm crest to the water are evaluated, as are differences in wind speed and sediment transport on the dune crest, berm crest and a pedestrian access gap. The dune is 18–20 m wide near the base and has a crest 4.5 m above backshore elevation. Two sand‐trapping fences facilitate accretion. Data were obtained from wind vanes on the crest and lee of the dune and anemometers and sand traps placed across the dune, on the beach berm crest and in the access gap. Mean wind direction above the dune crest varied from 11 to 3 deg from shore normal. No persistent recirculation eddy occurred on the 12 deg seaward slope. Wind speed on the berm crest was 85–89% of speed at the dune crest, but rates of sediment transport were 2.27 times greater during the strongest winds, indicating that a wide beach overcomes the transport limitation of a dune barrier. Limited transport on the seaward dune ramp indicates that losses to the water are mostly from the backshore, not the dune. The seaward slope gains sand from the landward slope and dune crest. Sand fences causing accretion on the dune ramp during onshore winds lower the seaward slope and reduce the likelihood of detached flows during offshore winds. Transport rates are higher in access gaps than on the dune crest despite lower wind speeds because of flatter slopes and absence of vegetation. Transport rates across dunes and through gaps can be reduced using vegetation and raised walkover structures. Copyright © 2017 John Wiley & Sons, Ltd.  相似文献   

敦煌-格尔木铁路沿线风动力环境特征     

鱼燕萍  张克存  安志山  张余 《中国沙漠》2020,40(1):41-48

敦煌-格尔木铁路沿线地形复杂、起沙因素多变、沙源丰富，沙害问题日益严重。目前对其风沙活动规律还未有研究，不利于防沙工作的开展。为此，通过对自北向南的5个观测点（S1、S2、S3、S4、S5）风速和风向的观测、计算和分析，利用平均风速、起沙风况及输沙势对敦格铁路沿线的风动力环境特征进行研究。结果表明：S5、S4和S3的风况对铁路风沙灾害防治意义较大。S5年平均风速、起沙风频率和输沙势最大，春季风沙活动最为强烈，且风向单一、风力强劲，风沙运动方向基本与铁路垂直，沙粒易在铁路附近堆积。S4夏季风沙活动最为强烈；S3春季风沙活动最为强烈，且风向单一，S4和S3的风沙运动方向与铁路夹角小于90°，附近沙源广阔，铁路易受风沙侵蚀，阻碍交通运营。  相似文献   

新疆S214公路台特玛湖干涸湖盆段风沙危害及防治     

蔡东旭  李生宇  王海峰  俞祥祥  王世杰  徐新文 《中国沙漠》2020,40(1):1-11

新疆S214（考干-米兰，考米线）公路位于库鲁克塔格沙漠东南缘，穿越台特玛湖干涸湖盆。由于该区气候干旱，风力强劲，沙源丰富，流动沙丘广布且快速移动，风沙危害对公路运输构成严重威胁。通过对风沙环境和风沙危害定位观测和土壤水盐特征系统调查，确定了风沙危害极为严重的公路区段，提出了合理的风沙防护措施及防沙体系结构。结果表明：该区具有明显的单风向风况，主要盛行ENE和NE风，偶有反向风沙活动，起沙风频率、输沙势、输沙率极高，属于高能-大比率风能环境；受土壤水分、盐分含量影响，地表紧实度差异较大，部分地段为极疏松的沙层，部分地段为紧实的盐壳；S214公路风沙危害防护区段为K4+900~K18+200，设计建造的阻-固-输相结合的机械-植物复合防沙体系，防沙效果明显，保障了道路安全运营。这一强风沙、高盐区公路防沙体系建设模式可为类似环境地区工程防沙提供借鉴。  相似文献   

珊瑚颗粒形状对钙质粗粒土的压缩性能影响     

张斌  柴寿喜  魏厚振  孟庆山  陈杨 《工程地质学报》2020,28(1):85-93

珊瑚颗粒形状不规则是其显著区别于陆源土的一大特征。为揭示珊瑚颗粒形状对钙质粗粒土压缩性能的影响,人工挑选出不同形状(块状、枝状、棒状、片状)的珊瑚颗粒,以块状颗粒为基础,与其他3种不同形状的粗颗粒任意一种混合,控制不同颗粒形状配比制成钙质粗粒土试样,完成室内压缩试验,对比分析试验前后珊瑚颗粒的圆度、长宽比、扁平度和凹凸度等形状参数,评价颗粒形状对压缩性能的影响。结果表明:(1)粒径为10~20 mm钙质粗粒土的压缩模量是4~5. 5 MPa,回弹系数为42~53;(2)随枝状、棒状或片状颗粒掺量的增加(0、10%、20%、30%),试样压缩模量呈小幅波状变化,回弹系数呈持续减小趋势;(3)各加载区间应力-应变曲线包括应力快速增长阶段、应力-应变同步增长阶段、应变增长阶段共3个阶段和1个稳定点;(4)随枝状颗粒掺量的增加,试样的长宽比和凹凸度逐渐增加,圆度和扁平度基本无变化;因颗粒破碎的影响,试验后试样的长宽比及扁平度有所增加,圆度及凹凸度则有所减小。选择钙质粗粒土地基时,应考虑其压缩性能,避免施工初期的快速加载。  相似文献   

Numerical study of sand scour with a modified Eulerian model based on incipient motion theory     

Qingqing Yuan  Min Zhao  Tong Ge 《Marine Georesources & Geotechnology》2018,36(7):818-826

Application of the standard Eulerian model to simulations of sand scour results in unrealistic phenomena. Therefore, the present work develops a modified Eulerian model based on sand incipient motion theory. The modified model is applied for simulating a two-dimensional single vertical jet and a moving planar jet. The simulation results generally demonstrate fairly good agreement with published results of scour profiles and the velocity contours of the water and sand phases. In addition, equations to describe self-similar scour profiles for the moving planar jet cases are given. The results demonstrate that the modified model efficiently and accurately simulates the two-dimensional sand scour produced by jets, particularly for the moving jet cases.  相似文献   

Response and capacity of monopod caisson foundation under eccentric lateral loads     

Tanmoy Kumar Deb  Baleshwar Singh 《Marine Georesources & Geotechnology》2018,36(4):452-464

Monopod caisson foundation is a viable alternative for supporting offshore wind turbines located at shallow water depths. This foundation system has to resist overturning moment generated due to resultant lateral load, arising from wind and water wave action, that can act at any loading height above the seabed. This paper presents results of a numerical investigation performed to determine the influence of loading height, caisson geometry and superstructure load on the ultimate lateral capacity, initial stiffness, and soil failure zone of the foundation, when installed in very dense sand. Both the ultimate and serviceable states of the caisson foundation obtained from the analyses are represented in terms of envelopes plotted between lateral load and overturning moment. Simplified expressions, which take into account the influence of caisson geometry, loading height, and soil properties, are also presented to serve as a preliminary base for design of the monopod caisson foundation.  相似文献   

Explicit stress–strain equations for modeling frictional materials     

Kenneth J. Xu  Martin D. Liu  Buddhima Indraratna 《Marine Georesources & Geotechnology》2018,36(6):722-734

In this paper, a comprehensive study on simulating the shearing behavior of frictional materials is performed. A set of two explicit equations, describing the relationship among the shear stress ratio and the distortional strain and the volumetric strain, are formulated independently. The equations contain three stress parameters and three strain parameters and another parameter representing the nonuniformity of stress and strain during softening. All the parameters have clear physical significance and can be determined experimentally. It is demonstrated that the proposed equations have the capacity of simulating the complicated shearing behavior of many types of frictional materials including geomaterials. The proposed equations are used to simulate the stress–strain behavior for 27 frictional materials with 98 tests. These materials include soft and stiff clays in both reconstituted and structured states, silicon sands and calcareous sands, silts, compacted fill materials, volcanic soils, decomposed granite soils, cemented soils (both artificially and naturally cemented), partially saturated soils, ballast, rocks, reinforced soils, tire chips, sugar, wheat, and rapeseed. It has been demonstrated that the proposed explicit constitutive equations have the capacity to capture accurately the shearing behavior of frictional materials both qualitatively and quantitatively. A study on model parameters has been performed.  相似文献