Analysis of Spatial–Temporal Evolution of Mining-Induced Fracture Field: A Case Study Using Image Processing in the Shaqu Coal Mine,China     

Cheng  Zhiheng  Liu  Biao  Zou  Quanle  Wang  Xin  Feng  Jicheng  Zhao  Zhiyan  Sun  Fulong 《Natural Resources Research》2020,29(3):1601-1615

Natural Resources Research - Mining-induced fracture plays a key role in gas drainage for gas burst-prone underground coal mines, especially for closely multilayered coal seams. The layout and...  相似文献   

Characterization and Quantification of Mining-Induced Fractures in Overlying Strata: Implications for Coalbed Methane Drainage     

Zhang  Bichuan  Sun  Haitao  Liang  Yunpei  Wang  Kequan  Zou  Quanle 《Natural Resources Research》2020,29(4):2467-2480

Natural Resources Research - Coalbed methane (CBM) production in the overlying strata of coal reservoirs is often hampered by the unknown distribution of the mining-induced fractures....  相似文献   

低渗透储层孔隙结构影响因素及其定量评价——以准噶尔盆地金龙2地区二叠系上乌尔禾组二段为例     

单祥  郭华军  郭旭光  邹志文  李亚哲  王力宝 《吉林大学学报(地球科学版)》2019,49(3):637-649

利用薄片、扫描电镜、物性及压汞等资料，对金龙2地区三叠系上乌尔禾组二段（P₃w₂）低渗（含砾）砂岩储层孔隙结构及其影响因素进行了研究。结果表明：①乌二段属于低孔低渗储层，根据压汞曲线参数特征，将其孔隙结构划分为三类。②成岩作用控制了储层孔隙结构，定量计算结果表明，乌二段视压实率平均为53.54%、视胶结率平均为47.53%、视溶蚀率平均为13.84%、视微孔隙率平均为60.67%，表现为中等压实、中-强胶结、弱溶蚀、微孔发育等特征；压实作用、胶结作用、微孔隙发育主要控制储层孔隙结构的形成。③引入成岩综合指数来定量表征各种成岩作用的综合强度，其与储层孔隙结构参数（排驱压力、分选系数）以及储层品质因子（RQI）具有较好的统计相关关系，Ⅰ类储层成岩综合指数大于8%，Ⅱ类储层成岩综合指数为2%~8%，Ⅲ类储层成岩综合指数小于2%。因此，可以利用成岩综合指数定量评价储层孔隙结构。  相似文献   

Grey Water Footprint Assessment from the Perspective of Water Pollution Sources: A Case Study of China     

Xionghe Qin  Sun  Caizhi  Han  Qin  Zou  Wei 《Water Resources》2019,46(3):454-465

Water Resources - With the acceleration of industrialization and urbanization, the water crisis is becoming more severe and may threaten the future of sustainable development. Assessing grey water...  相似文献   

利用SAXS表征不同变质程度煤纳米孔隙特征          下载免费PDF全文

刘阳  姚素平  汤中一 《高校地质学报》2019,25(1):108

文章通过小角X 射线散射（SAXS） 的方法研究了自然演化系列不同煤级煤的纳米孔隙结构和分布特征。结果表明， 随着煤级的增高，孔隙表面分形呈多阶段变化： Ro＜0.89%，壳质组开始逐渐液化，发育大量孔隙，分形维数不断增大； Ro 为0.9%~1.5%，因挥发分生油充填孔隙和原油沥青的芳构化等作用，而使微孔表面平整光滑，分形维数减小；Ro 为1.5% ~3.5%，镜质组裂解生气发育了大量纳米孔隙，分形维数再次增大；随后逐渐石墨化，表面分形再次降低。煤中纳米级孔 隙主要集中在50~100 nm 范围内。其中细介孔（2~10 nm） 体积百分比占0.21%~3.12%，中介孔（10~25 nm） 体积百分比占 5.06%~11.28%，粗介孔（25~50 nm） 体积百分比占21.06%~26.36%，大孔（50~100 nm） 所占体积百分比最大，高达 64.63%~68.36%。随着煤级升高，煤样的最可几孔径不断减小，最可几孔径由80 nm 减小到10 nm，减小的速度由缓到快； 中介孔和细介孔体积百分比不断增大，与成熟度分别呈对数和线性关系；粗介孔和大孔百分比不断减少，与成熟度呈对数 关系。最可几孔径变化也十分明显，在低煤化烟煤阶段时，随煤化程度增高最可几孔径略有下降（峰值处的孔径范围在 75~71 nm 内），中高煤化烟煤阶段时，随煤化程度的增高最可几孔径呈较明显的下降趋势（峰值处的孔径范围在78~53 nm 内），到无烟煤阶段时，其孔径则快速下降（峰值处的孔径范围在72~9 nm）。  相似文献   

海拉尔—塔木察格盆地中部富油凹陷高含凝灰质碎屑岩储层成因及油气勘探意义     

蒙启安  李军辉  李跃  邹越 《吉林大学学报(地球科学版)》2020,50(2):569-578

海拉尔—塔木察格盆地中部富油凹陷下白垩统铜钵庙组和南屯组广泛发育高含凝灰质碎屑岩储层，并已于其中获得了工业突破，但对其成因机制认识不清。在岩心、薄片、录井和测井等资料综合研究的基础上，结合大量海拉尔—塔木察格盆地及周边地区的火山事件分析，认为中部富油凹陷发育的高含凝灰质碎屑岩的岩石类型主要包括凝灰质砂岩、凝灰质泥岩、凝灰岩和沉凝灰岩。不同时期、不同凹陷高含凝灰质碎屑岩储层发育特点各异，整体来看从铜钵庙组到南屯组储层中的凝灰质含量越来越低，高含凝灰质碎屑岩储层主要发育在铜钵庙组和南一段沉积时期。高含凝灰质碎屑岩储层中的火山物质并非来源于自身断陷期发生的基性火山活动，而是来自于大兴安岭地区大规模的酸性火山喷发事件。海拉尔—塔木察格盆地高含凝灰质碎屑岩储层的成因机制包括两种类型：一种是同沉积期火山灰直接空降入湖型；另一种是同沉积期火山灰先沉降至陆上经河流搬运后再沉积的水携型。高含凝灰质碎屑岩储层中的火山碎屑物质受有机酸作用易于溶蚀，次生孔隙发育，为深部油气成藏提供了有效储层空间，并且火山喷发活动对优质烃源岩的形成具有促进作用，对于油气勘探具有重要意义。  相似文献   

多向不规则波浪作用下群墩结构上爬高的计算研究     

季新然  邹丽  任智源  柳淑学 《海洋学报》2019,41(3):35-43

波浪的方向分布对波浪的传播及其与工程结构物的作用都具有明显影响，目前现有的研究大多是基于单向波浪进行的。为了研究方向分布对群墩结构上的爬高影响，基于规则波浪与群墩作用的理论解，结合多向不规则波浪的造波方法，建立了多向不规则波浪与群墩作用的计算模型，同时进行了物理模型试验对模型的有效性进行了验证。系统地对群墩周围及表面上的波浪爬高进行了计算分析，结果表明，方向分布对波浪爬高具有较大的影响，且不同位置处的影响并不相同，在实际的工程设计中如果按照单向波浪计算，可能低估或者高估群墩周围的爬高。  相似文献   

舟山北部海域海底第四系淡水资源赋存潜力   总被引：1，自引：1，他引：0  

张志忠  邹亮  周良勇 《海洋学报》2018,40(3):50-61

为了解东海舟山北部海域海底第四系淡水资源赋存情况，本文在系统分析舟山北部海域地质钻孔和单道地震资料基础上，分析了研究海域海底第四纪地层结构与沉积环境，阐述了研究海域海底松散沉积物分布规律，探讨了上海陆地地区早更新世中、晚期和早期古河道在研究海域的延伸和分布状况，分析了研究海域海底第四系含水层赋存状况。研究海域第四系可供开发利用的主要含水层为早更新世中、晚期的第四承压含水层（Ⅳ）和早更新世早期的第五承压含水层（Ⅴ）；第四承压含水层古河道分布区富水性最佳，含水层顶部发育厚层黏性土隔水层区域赋存淡水资源的可能性很大，含水层开发利用潜力可分为开发前景良好A区、开发前景较好B区和开发前景一般C区3类；第五承压含水层在古河道分布区富水性强，具有很好的淡水赋存潜力和良好的开发利用前景。  相似文献   

A high accurate automated first-break picking method for seismic records from high-density acquisition in areas with a complex surface     

Yinpo Xu  Cheng Yin  Xuefeng Zou  Yudong Ni  Yingjie Pan  Liangjun Xu 《Geophysical Prospecting》2020,68(4):1228-1252

As the application of high-density high-efficiency acquisition technology becomes more and more wide, the areas with complex surface conditions gradually become target exploration areas, and the first-break picking work of massive low signal-to-noise ratio data is a big challenge. The traditional method spends a lot of manpower and time to interactively pick first breaks, a large amount of interactive work affects the accuracy and efficiency of picking. In order to overcome the shortcoming that traditional methods have weak anti-noise to low signal-to-noise ratio primary wave, this paper proposes a high accurate automated first-break picking method for low signal-to-noise ratio primary wave from high-density acquisition in areas with a complex surface. Firstly, this method determines first-break time window using multi-azimuth spatial interpolation technology; then it uses the improved clustering algorithm to initially pick first breaks and then perform multi-angle comprehensive quality evaluation to first breaks according to the following sequence: ‘single trace → spread → single shot → multiple shots’ to identify the abnormal first breaks; finally it determines the optimal path through the constructed evaluation function and using the ant colony algorithm to correct abnormal first breaks. Multi-azimuth time window spatial interpolation technology provides the base for accurately picking first-break time; the clustering algorithm can effectively improve the picking accuracy rate of low signal-to-noise ratio primary waves; the multi-angle comprehensive quality evaluation can accurately and effectively eliminate abnormal first breaks; the ant colony algorithm can effectively improve the correction quality of low signal-to-noise ratio abnormal first breaks. By example analysis and comparing with the commonly used Akaike Information Criterion method, the automated first-break picking theory and technology studied in this paper has high picking accuracy and the ability to stably process low signal-to-noise ratio seismic data, has a significant effect on seismic records from high-density acquisition in areas with a complex surface and can meet the requirements of accuracy and efficiency for massive data near-surface modelling and statics calculation.  相似文献   

Mineralogy,Fluid Inclusion,and Hydrogen and Oxygen Isotope Studies of the Intrusion‐Related Yangla Cu Deposit in the Sanjiang Region,SW China: Implications for Metallogenesis and Deposit Type     

Li‐Juan Du  Bo Li  Zhi‐Long Huang  Jun Chen  Jia‐Xi Zhou  Guo‐Fu Zou  Zai‐Fei Yan 《Resource Geology》2020,70(1):28-49

The Yangla deposit is an intrusion‐related Cu deposit in the Jinshajiang tectonic belt (eastern Sanjiang region, SW China). Despite extensive studies that have been conducted on this deposit, the relationship between the granitic magma and Cu mineralization is still unclear, and hence, the genesis is debated. To answer this question, we conducted an integrated study of mineralogy, fluid inclusions (FIs), and hydrogen and oxygen (H‐O) isotopes. Three mineralization stages were identified based on the ore textures, alteration zonation, and crosscutting relationships: (i) pre‐ore prograde skarn (stage I), with the garnet and pyroxene dominated by andradite and diopside, respectively; (ii) syn‐ore retrograde alteration (stage II), which is subdivided into the early syn‐ore stage (stage IIa) marked by retrograde hydrated mineral assemblages and significant Fe‐Cu‐Mo‐Pb‐Zn sulfide mineralization, and the late syn‐ore stage (stage IIb) featured by quartz‐calcite veins; and (iii) late supergene mineralization (stage III), which is characterized by secondary azurite and malachite. These results of mineralogy, FIs, and H‐O isotopes indicate that: (i) Cu mineralization has a close temporal, spatial, and genetic relationship with skarn alteration; (ii) the ore fluids were magmatic dominated with late‐stage meteoric water incursion; and (iii) Type‐S (halite‐bearing) and Type‐V (vapor‐rich) FIs coexisted in garnet and clinopyroxene of stage I, indicating that fluid boiling might have occurred during this stage. From stage I to stage IIa, the FI type transformed from Type‐S + Type‐V + Type‐L (liquid‐rich) to Type‐V + Type‐L with the conduct of mineralization and was accompanied by the disappearance of Type‐S, and homogenization temperature and salinity also tended to decrease dramatically, which may be caused by the deposition of skarn minerals. At stage IIa, boiling of the ore fluids still continued due to the change from lithostatic to hydrostatic pressure, which triggered the precipitation of abundant quartz‐Cu‐Mo‐Fe sulfides. Furthermore, fluid mixing between a high‐temperature magmatic fluid and a low‐temperature meteoric water might cause a considerable drop in temperature and the deposition of Cu‐bearing quartz/calcite veins during stage IIb. Hence, we consider the Yangla deposit to be of a skarn type, genetically related to the Mesozoic magmatism in the Sanjiang region.  相似文献