Investigating the vibration properties of integrated ceiling systems considering interactions with surrounding equipment     

Liangjie Qi  Keiichiro Kunitomo  Masahiro Kurata  Yoshiki Ikeda 《地震工程与结构动力学》2020,49(8):772-793

Studies on recent earthquakes highlighted that buildings with minimal structural damage still suffer from extensive damage and failure of nonstructural components. The dropping and damage of suspended ceiling systems, which typically consist of acceleration-sensitive nonstructural elements, resulted in lengthy functional disruptions and extended recovery time. This article experimentally and analytically examined the vibration properties of an integrated ceiling system considering the interactions with surrounding electrical equipment. The theoretical stiffness and corresponding frequency of electrical equipment were initially derived and then verified by subsequent vibration tests and numerical analyses. The seismic performance of the air conditioner (AC) was evaluated with different installment configurations based on design spectra and floor response spectra. Vibration tests of the suspended integrated ceiling system considering the interactions with surrounding equipment showed that the inclusion of peripheral constraints increased the first horizontal vibration frequency of the ceiling system by a factor of approximately 6. The natural frequencies of all components in the integrated ceiling system were almost identical, which was attributed to the coupled behavior between the ceiling panels and surrounding equipment, emphasizing the effect of interactions between adjacent components during dynamic analysis. Based on the above experimental investigation, an associated numerical model of the integrated ceiling system was created. Finally, corresponding parametric studies that included the interactions with surrounding equipment, reinforcing braces of ACs and strengthening members at the rise-up location between two elevations were performed.  相似文献   

Bidirectional shaking table tests of a low-cost friction sliding system with flat-inclined surfaces     

Miguel B. Brito  Mitsuyoshi Akiyama  Yoshitaka Ichikawa  Hiroki Yamaguchi  Riki Honda  Naomitsu Ishigaki 《地震工程与结构动力学》2020,49(8):817-837

A novel low-cost friction sliding system for bidirectional excitation is developed to improve the seismic performance of reinforced concrete (RC) bridge piers. The sliding system is a spherical prototype developed by combining a central flat surface with an inclined spherical segment, characterized by stable oscillation and a large reduction in response accelerations on the flat surface. The inclined part provides a restoring force that limits the residual displacements of the system. Conventional steel and concrete are employed to construct a flat-inclined spherical surface atop an RC pier. The seismic forces are dissipated through the frictions generated during the sliding movements; hence, the seismic resilience of bridges can be ensured with a low-cost design solution. The proposed system is fabricated utilizing a mold created by a three-dimensional printer, which facilitates the use of conventional concrete to construct spherical shapes. The concrete surface is lubricated with a resin material to prevent abrasion from multiple input ground motions. To demonstrate the effectiveness of the system, bidirectional shaking table tests are conducted in the longitudinal and transverse directions of a scaled bridge model. The effect of the inclination angle and the flat surface size is investigated. The results demonstrate a large decrease in response acceleration when the system exhibits circular sliding displacement. Furthermore, the inclination angle that generates the smallest residual displacement is identified experimentally.  相似文献   

Simultaneous water and vapour transfer in an unsaturated mudstone in badlands terrain,southwestern Taiwan     

Kohei Higuchi  Masahiro Chigira  Der-Her Lee  Jian-Hong Wu 《地球表面变化过程与地形》2020,45(13):3323-3335

The simultaneous transfer of pore fluid and vapour was studied in the unsaturated shallow subsurface of a Plio-Pleistocene marine mudstone badland slope in southwestern Taiwan during the dry season using field monitoring data and numerical simulations. Data from field monitoring show mass-basis water contents of ~0.05 to ~0.10 that decrease towards the unsaturated ground surface and were invariant during the middle part of the dry season, except for daily fluctuations. In addition, the observed daily fluctuations in water content correlate with fluctuations in bedrock temperature, especially at depths of 2.5–5.0 cm. Periodic increases in water content occurred most notably during the day, when the bedrock temperature showed the greatest increase. Water contents then decreased to the previous state as bedrock temperature decreased during the night. Calculated vapour fluxes within the mudstone during the day increased up to 6 × 10⁻⁶–1 × 10⁻⁵ kg m⁻² s⁻¹, deriving a 0.01–0.02 increase in mass-basis water content at 2.5 cm depth for a 12-h period. This agrees with field monitoring data, suggesting that increases in water content occurred due to vapour intrusions into the bedrock. Pore water electrical conductivity (EC) showed periodic variations due to vapour intrusion, and gradually increased between the ground surface and depths of 2.5–5.0 cm. In contrast, pore water EC gradually decreased between 15 and 40 cm depth. Calculated water fluxes at depths of 2.5–40.0 cm varied from −4 × 10⁻⁶ to −2 × 10⁻⁹ kg m⁻² s⁻¹. These fluxes generated an increase in solute concentrations at the ground surface, with negative values of water flux indicating an upwards movement of water towards the surface. We show that the increase in solute content due to solute transfer from depth is highly dependent on variations in water flux with depth. © 2020 John Wiley & Sons, Ltd.  相似文献   

A land-use mix allocation model considering adjacency,intensity, and proximity     

Sunyong Eom  Tsutomu Suzuki  Myeong-Hun Lee 《International journal of geographical information science》2020,34(5):899-923

ABSTRACT

Land-Use Mix (LUM) refers to the strategy of integrating complementary functions within a building or area. While LUM has become a dominant approach in urban planning, its actual benefits and vision for spatial planning remain unclear. To clarify this issue, this study discerns the spatial features of land-use patterns depending on the compatibilities among land-use categories. Accordingly, this study introduces three LUM measures – adjacency, intensity, and proximity – to identify differences in the spatial distribution of land-use categories. Based on these measures, a land-use allocation model is developed to specify spatial patterns satisfying the given compatibilities. This model is tested by applying the concept of the neighborhood unit on a case study of normative land-use patterns subject to specified compatibilities. The results describe spatial features of four compatibility sets, including a set exhibiting a compatibility conflict between the same land-use pair and LUM measures when, for example, a given land-use pair is compatible in terms of intensity but incompatible in terms of proximity. Understanding the spatial features of a normative land-use pattern that satisfies various possible compatibilities will facilitate the incorporation of the LUM approach into local planning guidance and zoning ordinances.  相似文献   

A comparison of neighbourhood relations based on ordinary Delaunay diagrams and area Delaunay diagrams: an application to define the neighbourhood relations of buildings     

Hiroyuki Usui  Akihiro Teraki  Kei-ichi Okunuki  Toshiaki Satoh 《International journal of geographical information science》2020,34(11):2177-2203

ABSTRACT

The aim of this article is to describe a convenient but robust method for defining neighbourhood relations among buildings based on ordinary Delaunay diagrams (ODDs) and area Delaunay diagrams (ADDs). ODDs and ADDs are defined as a set of edges connecting the generators of adjacent ordinary Voronoi cells (points representing centroids of building polygons) and a set of edges connecting two centroids of building polygons, which are the generators of adjacent area Voronoi cells, respectively. Although ADDs are more robust than ODDs, computation time of ODDs is shorter than that of ADDs (the order of their computation time complexity is O(nlogn)). If ODDs can approximate ADDs with a certain degree of accuracy, the former can be used as an alternative. Therefore, we computed the ratio of the number of ADD edges to that of ODD edges overlapping ADDs at building and regional scales. The results indicate that: (1) for approximately 60% of all buildings, ODDs can exactly overlap ADDs with extra ODD edges; (2) at a regional scale, ODDs can overlap approximately 90% of ADDs with 10% extra ODD edges; and (3) focusing on judging errors, although ADDs are more accurate than ODDs, the difference is only approximately 1%.  相似文献   

Satellite-based Estimates of Canopy Photosynthetic Parameters for an Alpine Meadow in Northern     

NIU Ben  HE Yongtao  ZHANG Xianzhou  SHI Peili  DU Mingyuan 《资源与生态学报(英文版)》2020,11(3):253-262

  相似文献   

Numerical study on transient harbor oscillations induced by successive solitary waves   总被引：1，自引：1，他引：0  

Junliang Gao  Chunyan Ji  Yingyi Liu  Xiaojian Ma  Oleg Gaidai 《Ocean Dynamics》2018,68(2):193-209

Tsunamis are traveling waves which are characterized by long wavelengths and large amplitudes close to the shore. Due to the transformation of tsunamis, undular bores have been frequently observed in the coastal zone and can be viewed as a sequence of solitary waves with different wave heights and different separation distances among them. In this article, transient harbor oscillations induced by incident successive solitary waves are first investigated. The transient oscillations are simulated by a fully nonlinear Boussinesq model, FUNWAVE-TVD. The incident successive solitary waves include double solitary waves and triple solitary waves. This paper mainly focuses on the effects of different waveform parameters of the incident successive solitary waves on the relative wave energy distribution inside the harbor. These wave parameters include the incident wave height, the relative separation distance between adjacent crests, and the number of elementary solitary waves in the incident wave train. The relative separation distance between adjacent crests is defined as the ratio of the distance between adjacent crests in the incident wave train to the effective wavelength of the single solitary wave. Maximum oscillations inside the harbor excited by various incident waves are also discussed. For comparison, the transient oscillation excited by the single solitary wave is also considered. The harbor used in this paper is assumed to be long and narrow and has constant depth; the free surface movement inside the harbor is essentially one-dimensional. This study reveals that, for the given harbor and for the variation ranges of all the waveform parameters of the incident successive solitary waves studied in this paper, the larger incident wave heights and the smaller number of elementary solitary waves in the incident tsunami lead to a more uniform relative wave energy distribution inside the harbor. For the successive solitary waves, the larger relative separation distance between adjacent crests can cause more obvious fluctuations of the relative wave energy distribution over different resonant modes. When the wave height of the elementary solitary wave in the successive solitary waves equals to that of the single solitary wave and the relative separation distance between adjacent crests is equal to or greater than 0.6, the maximum oscillation inside the harbor induced by the successive solitary waves is almost identical to that excited by the single solitary wave.  相似文献   

德令哈13.7m望远镜接收机抗射频干扰研究     

李振强  李积斌  张旭国  单文磊  徐烨  左营喜  张海龙  金风娟  孙继先  逯登荣  巨秉刚 《天文学报》2019,60(3):62-76

在天文观测中,射频干扰会造成假谱,降低数据的可靠性和有效性.射频干扰消减旨在减少干扰信号对射电天文观测的影响,包含器件方面的技术革新和数据处理领域的方法研究.针对德令哈13.7 m望远镜接收机中频部分引入的射频干扰,通过优化中频器件的抗射频干扰能力,提高了接收机的整体抗射频干扰能力,以主动消除方法来减少射频干扰耦合到接收机内部.分析了接收机干扰的传输路径,提出了器件射频干扰的直接耦合系数和器件射频干扰的系统耦合系数的概念,为定位干扰敏感器件并量化干扰引入比重提供了基础.经过抗射频干扰优化后,接收机抗干扰能力改善30 dB左右,望远镜的天文观测效率提高10%以上.  相似文献   

Research note: deblended-data reconstruction using generalized blending and deblending models     

Tomohide Ishiyama  Mohammed Y. Ali  Satoshi Ishikawa  Gerrit Blacquiere  Shotaro Nakayama 《Geophysical Prospecting》2019,67(7):1852-1866

We introduce a concept of generalized blending and deblending, develop its models and accordingly establish a method of deblended-data reconstruction using these models. The generalized models can handle real situations by including random encoding into the generalized operators both in the space and time domain, and both at the source and receiver side. We consider an iterative optimization scheme using a closed-loop approach with the generalized blending and deblending models, in which the former works for the forward modelling and the latter for the inverse modelling in the closed loop. We applied our method to existing real data acquired in Abu Dhabi. The results show that our method succeeded to fully reconstruct deblended data even from the fully generalized, thus quite complicated blended data. We discuss the complexity of blending properties on the deblending performance. In addition, we discuss the applicability to time-lapse seismic monitoring as it ensures high repeatability of the surveys. Conclusively, we should acquire blended data and reconstruct deblended data without serious problems but with the benefit of blended acquisition.  相似文献   

Stochastic bivariate time series models of waves in the North Sea and their application in simulation-based design     

《Applied Ocean Research》2019

In this paper, we present and evaluate three long-term wave models for application in simulation-based design of ships and marine structures. Designers and researchers often rely on historical weather data as a source for ocean area characteristics based on hindcast datasets or in-situ measurements. The limited access and size of historical datasets reduces repeatability of simulations and analyses, making it difficult to assess the sampling variability of performance and loads on marine vessels and structures. Markov, VAR and VARMA wave models, producing independent long-term time series of significant wave height (H_s) and spectral peak period (T_p), is presented as possible solutions to this problem. The models are tested and compared by addressing how the models affect interpretation of design concepts and the ability to replicate statistical and physical characteristics of the wave process. Our results show that the VAR and VARMA models perform sufficiently in describing design performance, but does not capture the physical process fully. The Markov model is found to perform worst of the tested models in the applied tests, especially for measures covering several consecutive sea states.  相似文献