排序方式: 共有18条查询结果,搜索用时 15 毫秒
1.
为研究铅金属减震器对特高压互连电气设备的减震效果,进行由硬管母线连接的特高压避雷器设备和电容式电压互感器设备组成的互连耦合体系的地震模拟振动台试验。通过白噪声扫频、抗震及减震试验,测定互连耦合体系抗震结构及减震结构的自振频率以及关键部位的应变、加速度响应。试验结果表明:抗震结构中避雷器设备的最大应变响应大于互感器设备,互连耦合体系中的避雷器设备属于易损设备;安装减震器后互连设备频率降低幅度较小,减震器基本不会影响电气设备的正常运行;安装减震器后互连耦合体系中的避雷器设备和互感器设备在较大峰值加速度地震波作用下,设备顶端加速度响应和最大应变响应均有较大幅度的降低,避雷器设备和互感器设备的最大应变响应的减震效率分别为75%和50%,减震效果显著,减震器的应用大幅提升了互连耦合体系的抗震能力。 相似文献
2.
3.
新型耗能(阻尼)减震器的开发与研究 总被引:18,自引:7,他引:11
本文阐述了耗能减震的概念和原理,提出了耗能减震器设计的新思想,研制开发了多种新型实用耗能(阻尼)减震器,并对其中的圆环耗能器、双环耗能器、架颈圆环耗能器、弹塑性-摩擦复合耗能器等进行了循环荷载试验,考察了耗能器代作性能和耗能性能,对已装与未装耗能减震器的钢筋混凝土框架模型进行了伪动力对比实验,进一步考察了耗能减震器的减震效果。在试验研究的基础上,地耗能(阻尼)减震结构体系的分析方法进行了研究,并编 相似文献
4.
The electromagnetic mass damper (EMD) control system, as an innovative active control system to reduce structural vibration, offers many advantages over traditional active mass driver/damper (AMD) control systems. In this paper, studies of several EMD control strategies and bench-scale shaking table tests of a two-story model structure are described. First, two structural models corresponding to uncontrolled and Zeroed cases are developed, and parameters of these models are validated through sinusoidal sweep tests to provide a basis for establishing an accurate mathematical model for further studies. Then, a simplified control strategy for the EMD system based on the pole assignment control algorithm is proposed. Moreover, ideal pole locations are derived and validated through a series of shaking table tests. Finally, three benchmark earthquake ground motions and sinusoidal sweep waves are imposed onto the structure to investigate the effectiveness and feasibility of using this type of innovative active control system for structural vibration control. In addition, the robustness of the EMD system is examined. The test results show that the EMD system is an effective and robust system for the control of structural vibrations. 相似文献
5.
6.
7.
耗能减震体系的能量设计方法 总被引:20,自引:0,他引:20
建立了耗能减震体系的能量方程,给出了这类体系实用,简便的能量设计方法。 相似文献
8.
9.
10.
通过典型高压断路器的振动台实验及有限元模型计算, 分析了铅合金减震器的减震效果. 实验分析结果表明, 铅合金减震器不仅降低了断路器的加速度反应和应变反应, 而且没有增加断路器的位移反应. 其最大应变降低量平均达到30%, 且输入地震动越强, 减震效果越明显. 有限元模型计算分析进一步论证了铅合金减震器的减震效果, 尤其是具有丰富长周期地震动和速度脉冲地震动作用下的减震效果. 基于断路器的地震破坏模式, 本文将减震器的减震效果定义为断路器瓷柱最大应变的降低率. 综合计算结果和振动台试验结果, 本文初步确定了铅合金减震器的适用范围. 相似文献