黄土洞室掘进深度与围岩位移变化规律研究     

时卫民  王鹏  赵尚毅 《岩土工程技术》2020,(2):70-75

应用PLAXIS 2D/3D有限元分析软件,对某黄土洞室进行了二维、三维分步掘进、三维一次掘进等工况的弹塑性有限元分析,研究分析了不同工况下洞室围岩位移的变化规律,并对掌子面的空间效应进行了分析。分析结果表明,二维与三维分步计算的最终位移基本一致,可以用二维的计算结果来估算洞室开挖的最终位移。三维分步掘进的分析表明,不同埋深的洞室其位移比的变化规律基本一致,当L/B<1时(L为掘进深度,B为洞室跨度),位移比呈线性增加;当L/B>1时,位移比呈非线性增加;当L/B>3时,其最大位移接近最终位移。掌子面的空间效应分析表明,在掌子面处的位移约为最终位移的1/3,距掌子面0.5倍跨度处的位移约为最终位移的2/3,距掌子面2.5倍跨度处的位移基本达到了最终位移。  相似文献   

南海边缘海多金属结核与大洋多金属结核对比     

殷征欣  王海峰  韩金生  吕修亚  沈泽中  陈静  贺惠忠  谢安远  关瑶  董超 《吉林大学学报(地球科学版)》2019,49(1):261-277

本文通过系统对比分析前人研究成果，研究了南海边缘海多金属结核的成矿特征，结果表明：南海边缘海结核的矿物组成与大洋结核相似，均主要由锰相矿物和铁相矿物组成，其中锰相矿物主要为水羟锰矿和钡镁锰矿，铁相矿物主要以无定型铁氧化/氢氧化物形式存在，另外南海边缘海结核中含有大量硅酸盐矿物，表明在南海结核成矿过程中受到大量的陆源碎屑矿物混杂；相对于大洋主要经济成矿区的多金属结核，南海边缘海多金属结核中主要的经济元素如Mn、Cu、Co、Ni和Zn质量分数较低，而亲陆源性元素如Fe、Ti、P、Nb、Pb、Rb、Sc、Ta、Sr、Th和REY（REE和Y）等质量分数较高；南海边缘海多金属结核的元素地球化学特征和REE配分模式显示其为水成成因，并呈现更低的Mn/Fe值；同时南海边缘海结核也具有较快的平均生长速率及较高的δCe正异常，表明其生长在更为氧化的海水环境。虽然较快的沉积物沉积速率和动荡的海水环境影响了南海边缘海结核的成矿，但大量陆源物质进入海洋也为南海边缘海结核提供了丰富的成矿物质来源，便于南海边缘海结核的快速生长成矿。南海边缘海结核富集有Fe、Ti、Pb、Rb、Th和REY等金属元素，同样可以作为极具潜力的海洋矿产资源。南海边缘海多金属结核具有其独特的地球化学特征，与大洋多金属结核存在着明显差异。  相似文献   

白云鄂博矿区土壤和植物中稀土元素的分布特征   总被引：2，自引：1，他引：1  

张立锋  刘杰民  张翼明 《岩矿测试》2019,38(5):556-564

白云鄂博矿区是稀土的主要产出地,在矿山开采和选炼等过程中,稀土元素通过迁移、富集等作用进入植物体,研究稀土元素的分布特征和迁移规律,可为白云鄂博矿体闭坑后的生物修复提供数据支持。本文设置了7个土壤采样点,采集铁花、沙蒿、沙打旺、沙朋、青蒿、小叶杨、猪毛菜七种植物,用电感耦合等离子体质谱法测定土壤和植物的根、茎、叶及整株的稀土含量,研究稀土元素在土壤和植物中的分布特征和迁移规律。统计分析结果表明:随着采样区与主矿区的距离增加,土壤样品中的稀土含量逐渐减少;在七种植物中,铁花的稀土含量最高,青蒿最低;对不同植物的整株稀土含量和各部位(根、茎、叶)稀土含量进行多元线性回归分析,叶(或花)的稀土含量在整珠植物中的占比最大。此外在不同季节,植物中的稀土含量基本保持不变,含量较高的稀土元素为Ce(0.0035%～0.020%)、La(0.0012%～0.011%)、Nd(0.0010%～0.0094%)和Pr(0.00036%～0.0046%),其中Ce最高。本研究提出:根据土壤样品中的稀土含量逐渐减少的特征,矿区周围土壤的稀土来源可能是矿石在采、选过程中的扩散造成的;根据植物富集稀土的能力,在矿山闭坑后,可种植富集稀土能力强的植物——铁花,进行矿山生物修复。  相似文献   

Undrained lower bound solutions for end bearing capacity of shallow circular piles in non-homogeneous and anisotropic clays     

Boonchai Ukritchon  Suraparb Keawsawasvong 《国际地质力学数值与分析法杂志》2020,44(5):596-632

The undrained bearing capacity of shallow circular piles in non-homogeneous and anisotropic clay is investigated by the lower bound (LB) finite element limit analysis (FELA) under two-dimensional (2D) axisymmetric condition using second-order cone programming, and the new solution of the problem is presented. Modified from the isotropic von Mises yield criterion, a cross-anisotropic undrained strength criterion of clays under the axisymmetric state of stress requiring three input shear strengths in triaxial compression, direct simple shear, and triaxial extension is employed in the 2D axisymmetric LB FELA. Parametric studies on the effects of pile embedment ratio, dimensionless strength gradient, anisotropic strength ratio, and pile roughness are investigated extensively, while the predicted failure mechanisms associated with these parameters are discussed and compared. Numerical results of undrained end bearing capacity of shallow circular piles are summarized in the form of design tables that are useful for design practice and represent a new contribution to the field of pile capacity considering the combined effects of undrained strength non-homogeneity and anisotropy.  相似文献   

Fully coupled hydraulic fracture simulation using the improved element partition method     

Shujun Peng  Zhennan Zhang  Jianye Mou  Bing Zhao  Zhiyuan Liu  Jiading Wang 《国际地质力学数值与分析法杂志》2019,43(1):441-460

The improved element partition method (IEPM) is a newly developed fracture simulation approach. IEPM allows a fracture to run across an element without introducing extra degrees of freedom. It can also simulate any number of fractures in a prescribed mesh without remeshing. In this study, the IEPM is extended to hydraulic fracture simulation. First, the seepage and volumetric storage matrix of a cracked element are derived using virtual nodes (the intersection points of a crack with element edges). Subsequently, the fully coupled hydromechanical equation is derived for this cracked element. To eliminate the extra degrees of freedom (virtual nodal quantities), the water pressure and displacement of the virtual nodes are associated with their adjacent nodes through least squares interpolation. Finally, the fully coupled equation in terms of nodal quantities is obtained. The verification cases validate the method. By using this method, the field-scale hydraulic fracturing process is well simulated. The proposed approach is simple and efficient for field-scale hydraulic fracture simulation.  相似文献   

Robust numerical implementation of a 3D rate-dependent model for reservoir geomechanical simulations     

Giovanni Isotton  Pietro Teatini  Massimiliano Ferronato  Carlo Janna  Nicolò Spiezia  Stefano Mantica  Giorgio Volonte 《国际地质力学数值与分析法杂志》2019,43(18):2752-2771

A 3D elasto-plastic rate-dependent model for rock mechanics is formulated and implemented into a Finite Element (FE) numerical code. The model is based on the approach proposed by Vermeer and Neher (A soft soil model that accounts for creep. In: Proceedings of the International Symposium “Beyond 2000 in Computational Geotechnics,” pages 249-261, 1999). An original strain-driven algorithm with an Inexact Newton iterative scheme is used to compute the state variables for a given strain increment.The model is validated against laboratory measurements, checked on a simplified test case, and used to simulate land subsidence due to groundwater and hydrocarbon production. The numerical results prove computationally effective and robust, thus allowing for the use of the model on real complex geological settings.  相似文献   

Quantitative prediction of discrete element models on complex loading paths     

Luc Sibille  Pascal Villard  Félix Darve  Rodaina Aboul Hosn 《国际地质力学数值与分析法杂志》2019,43(5):858-887

The ability of discrete element models to describe quantitatively (and not only qualitatively) the constitutive behaviour of a dense sand is assessed in this paper. Two kinds of 3D discrete models are considered. Both consider spheres as elementary particles. Nevertheless, the first model implements a contact law with rolling resistance whereas the second takes into account clumps made of two spheres. The discrete models are calibrated and validated from mechanical tests performed on a dense Hostun sand with a true triaxial apparatus. The calibration is carried out from axisymmetric drained compression tests, while the validation is discussed from monotonic and cyclic stress proportional loading paths and from a circular stress path in the deviatoric stress plane. The quality of the predictions of the discrete models are evaluated by comparison with the predictions given with advanced phenomenological constitutive relations, mainly an incrementally non-linear relation. Predictions given by the discrete models are remarkable, particularly when it is put in perspective with respect to the very few number of mechanical tests required for their calibration. However, these results and conclusions were reached in enabling conditions, and some limitations of such discrete models should be kept in mind.  相似文献   

p-y曲线对成层土体中大直径单桩的适用性研究          下载免费PDF全文

孟晓伟  翟恩地  许成顺 《海洋技术学报》2019,38(2)

API规范推荐的p-y曲线是由均质土体得到的,并未考虑土层间相互作用,Georgiadis基于柔性桩提出了等效深度法修正p-y曲线,把均质土p-y曲线延伸到了成层土体中。为了研究p-y曲线和等效深度法对于大直径单桩在成层土体中的适用性,取4种典型地质条件:成层砂土、砂土-黏土-砂土、成层黏土和黏土-砂土-黏土,通过L-PILE软件计算了6 m直径单桩基础的p-y曲线、桩顶水平荷载-位移曲线、桩身位移和弯矩。并与ABAQUS建立的单桩基础三维有限元模型计算结果进行比较。结果表明等效深度法对于成层砂土影响不大;对于成层黏土影响较大;对于中间为软弱土层的成层土体,在荷载较大时影响显著,等效深度法计算结果更加接近FEM结果。在成层土体中,p-y曲线应用于大直径单桩对于砂土高估了初始刚度,低估了极限抗力;对于黏土则低估了初始刚度和极限抗力。  相似文献   

Three-dimensional finite element simulation of fracture propagation in rock specimens with pre-existing fissure(s) under compression and their strength analysis     

Ramin Pakzad  Shanyong Wang  Scott W. Sloan 《国际地质力学数值与分析法杂志》2020,44(10):1472-1494

A FORTRAN program, consistent with the commercially available finite element (FE) code ABAQUS, is developed based on a three-dimensional (3D) linear elastic brittle damage constitutive model with two damage criteria. To consider the heterogeneity of rock, the developed FORTRAN program is used to set the stiffness and strength properties of each element of the FE model following a Weibull distribution function. The reliability of the program is assessed against available experimental results for granite cylindrical specimens with a throughgoing, flat and inclined fissure. The calibration procedure of the material parameters is explained in detail, and it is shown that the compressive to tensile strength ratio can have a substantial influence on the failure response of the specimens. Numerical simulations are conducted for models with different levels of heterogeneity. The results show a smaller load bearing capacity for models with less homogeneity, representing gradual coalescence of fully damaged elements forming throughout the models during loading. The maximum load bearing capacity is studied for various combinations of inclination angles of two centrally aligned, throughgoing and flat fissures of equal length embedded in cylindrical models under uniaxial and multiaxial loading conditions. The key role of the compressive to tensile strength ratio is highlighted by repeating certain simulations with a lower compressive to tensile strength ratio. It is proven that the peak loads of the rock models with sufficiently small compressive to tensile strength ratios containing two throughgoing fissures of equal length are similar, provided that the minimum inclination angles of the models are the same. The results are presented and discussed with respect to the existing experimental findings in the literature, suggesting that the numerical model applied in this study can provide useful insight into the failure behaviour of rock-like materials.  相似文献   

GBW10010a大米标准物质复(研)制及数据特征     

杨榕  顾铁新  潘含江  刘妹  周国华 《岩矿测试》2020,39(6):866-877

随着我国对生态文明建设的重视，自然资源综合调查势在必行，对生物标准物质亦提出了新的需求。当前相关调研工作已经大面积开展，自然资源综合调查、农产品与食品安全评价都需要对生物样品元素组成进行准确测试，需要以生物标准物质作为生物成分测试量值比对和溯源的基础，因此对生物基体标准物质的需求量大幅增加。大米作为主要粮食之一，其食品安全日益受到重视，对大米中的化学成分进行准确的分析测试具有重要的现实意义，因而对大米标准物质的需求量尤为突出，但目前大米成分分析标准物质已供不应求。本文严格按照《标准物质定值的通用原则及统计学原理》（JJF 1343—2012）和《地质分析标准物质的研制》（JJF 1646—2017）等相关规范要求，开展了GBW10010a大米成分分析标准物质的复（研）制工作，包括样品采集、加工制备、均匀性检验、稳定性检验、多家实验室协作定值测试及不确定度评定等关键环节。结果表明：本次复（研）制的大米标准物质定值成分多样、量值准确可靠，符合国家一级标准物质的要求。GBW10010a共定值54项主微量元素，包括Ag、Al、As、B、Ba、Be、Bi、Ca、Cd、Ce、Co、Cr、Cs、Cu、Dy、Er、Eu、Fe、Gd、Ge、Hg、Ho、K、La、Li、Ho、Mg、Mn、Mo、N、Na、Nb、Nd、Ni、P、Pb、Pr、Rb、S、Sb、Sc、Se、Si、Sm、Sr、Tb、Th、Tl、Tm、U、V、Y、Yb、Zn，其中的39项元素给出了标准值及不确定度，包括Ag、Al、As、B、Ba、Ca、Cd、Ce、Co、Cs、Cu、Dy、Er、Fe、Hg、K、Li、Mg、Mn、Mo、N、Na、Nd、Ni、P、Pb、Pr、Rb、S、Sb、Se、Si、Sm、Sr、Tb、Tl、Y、Yb、Zn；15项元素提供参考值，包括Be、Bi、Cr、Eu、Gd、Ge、Ho、Ho、La、Nb、Sc、Th、Tm、U、V。与原有GBW10010大米标准物质相比较，GBW10010a中As、Cd、Co、Cr、Cu、Hg、Mn、Mo、Ni、Zn等重金属元素含量显著下降，其中Cd、Cu、Zn降幅较大，分别下降约39%、43%、38.7%，一定程度上反映了农田生态环境的改善。本批标准物质定值元素总数量增加了6项，新增定值元素Ag、Nb（Nb给出参考值），并且各项元素不确定度范围整体上有所缩小，如Al、Cd、Cu、Fe、K、Mg、Mo、Na、P、Pb、Se、Zn等对生物易有影响的重要元素，表明了地质分析测试方法技术的进步及定值水平的提高。本批标准物质定值元素涵盖了具有生物效应的大部分主微量元素，适用于农业生态环境地球化学调查与评价、生物样品测试、农产品质量与食品安全评价样品测试时的分析仪器校正、分析方法评价和分析质量监控等多个领域。  相似文献