宇宙线的超新星遗迹起源     

张轶然  刘四明 《天文学报》2019,60(5):63-84

宇宙线的起源是高能天体物理的核心问题之一.一直以来,超新星爆发被认为是能谱膝区以下宇宙线的主要来源.多波段观测表明,超新星遗迹有能力加速带电粒子至亚PeV (10~(15)eV)能量.扩散激波加速被认为是最有效的天体高能粒子加速机制之一,而超新星遗迹的大尺度激波正好为这一机制提供平台.近年来,一系列较高精度的地面和空间实验极大地推动了对宇宙线以及超新星遗迹的研究.新的观测事实挑战着传统的扩散激波加速模型以及其在银河系宇宙线超新星遗迹起源学说上的应用,深化了人们对宇宙高能现象的认识.结合超新星遗迹辐射能谱的时间演化特性,构建的时间依赖的超新星遗迹粒子加速模型,不仅能够解释200 GV附近宇宙线的能谱反常,还自然地形成能谱膝区,甚至可以将超新星遗迹粒子加速对宇宙线能谱的贡献延伸至踝区.该模型预期超新星遗迹中粒子的输运行为表现为湍流扩散,这需要未来的观测以及与粒子输运相关的等离子体数值模拟工作来进一步验证.  相似文献   

基于蓝牙定位的老年人室内跌倒监护系统设计     

赵帅豪  王坚 《北京测绘》2020,(3):333-337

随着全球老龄化的加剧,老年人口的增多,老年人的健康监护已经成为了重要的社会问题。因身体机能的下降,老年人发生跌倒的概率非常高,而老年人一天中大约90%的时间是处于室内,针对老年人室内意外跌倒的医护救治,设计了一款基于蓝牙定位的老年人室内跌倒监护系统。该系统通过集成的传感器采集加速度、角速度、室内位置、人体生理信息等数据,并通过计算分析实现了跌倒监测报警功能。  相似文献   

Prediction of ground motion due to the collapse of a large-scale cooling tower under strong earthquakes     

《Soil Dynamics and Earthquake Engineering》2014

The ground motion owing to the collapse of a large-scale cooling tower under strong earthquakes was appropriately predicted using a comprehensive approach. The predicted results can be used for the safety evaluation of nuclear-related facilities adjacent to the cooling tower as well as in the planning of nuclear power plant construction in China. In this study, a cooling tower–soil model was first developed based on a falling weight–soil model, which the authors verified by falling weight tests. Then the collapse process of a cooling tower was simulated, and the collapse-induced ground vibrations were assessed by using the proposed model. Finally, the ground motion, which was a combination of the earthquake-induced ground motion and the collapse-induced ground vibrations, was estimated based on the superposition principle of waves. It was found that the cooling tower may collapse under strong earthquakes with the peak ground accelerations (PGAs) in the range of 0.35–0.45 g in x (EW) and y (NS) directions, respectively. These PGAs are far beyond the PGA range of major earthquakes in the common seismic design in China. The types of the site geologies of towers can significantly affect the collapse-induced ground vibrations. For a typical hard soil consisting of strongly weathered sandy slate, moderate ground vibrations may occur in the considered region. The collapse-induced PGAs were in the range of 0.017–0.046 g for the observed points at distances of 350 m in radial direction. For a rock-like foundation, the collapse-induced radial PGAs may be as high as 0.08 g at distances of 350 m, indicating that the effect of the collapse-induced ground vibrations on the nuclear-related facilities should be seriously assessed in certain scenarios.  相似文献   

地下结构抗震设计的改进等效反应加速度法     

禹海涛  张正伟  李攀 《岩土力学》2020,41(7):2401-2410

对地下结构横向抗震分析中的等效反应加速度法进行综合分析。结合算例，以动力时程法为基准，全面评价了等效反应加速度法的适用性；进而深入分析其误差来源，并做针对性改进优化，通过引入动力响应调整系数β，提出了一种改进等效反应加速度法；结合算例分析，评价了改进等效反应加速度法对不同工况的适用性。结果表明：等效反应加速度法计算所得结构内力及变形均偏小；且计算精度随地层剪切波速的增大整体呈上升趋势，但几乎不受结构埋深的影响；同时，明确了等效反应加速度法的误差源自于其忽略了地下结构对其周围土体动力响应的干扰作用，改进优化后提出了改进等效反应加速度法；相比现有等效反应加速度法，改进等效反应加速度法具有更广泛的适用性及更优的计算精度，可为地下结构抗震设计和分析提供新的计算方法。  相似文献   

Modelling the time‐dependent behaviour of granular material with hypoplasticity          下载免费PDF全文

Shun Wang  Wei Wu  Zhen‐Yu Yin  Chong Peng  Xuzhen He 《国际地质力学数值与分析法杂志》2018,42(12):1331-1345

This paper presents a constitutive model for time‐dependent behaviour of granular material. The model consists of 2 parts representing the inviscid and viscous behaviour of granular materials. The inviscid part is a rate‐independent hypoplastic constitutive model. The viscous part is represented by a rheological model, which contains a high‐order term denoting the strain acceleration. The proposed model is validated by simulating some element tests on granular soils. Our model is able to model not only the non‐isotach behaviour but also the 3 creep stages, namely, primary, secondary, and tertiary creep, in a unified way.  相似文献   

黄土河谷场地地形放大效应的研究     

王良  卢育霞  马林伟  孔德政 《大地测量与地球动力学》2018,38(2):167-171

使用黄土河谷场地模型对地震动峰值加速度和频谱特征进行研究。结果表明，不同工况下各观测点PGA的放大比呈现出不同的变化规律。分析山顶和山谷各点的傅里叶谱以及谱比发现，在地形和土层共同作用下的放大效应是各自单独作用下放大效应的乘积。  相似文献   

RESEARCH ON PASSIVE SERVO SEISMIC ROTATIONAL ACCELERATION SENSOR WITH LARGE DAMPING     

QU Ming-zhe  GAO Feng  YANG Xue-shan  YANG Dong-xia 《地震地质》2018,40(5):1170-1178

Many strong motion records show that under the strong seismic vibration of, the torsional disfigurement of building structures is a common and serious damage. At present, there are no special sensors for measuring seismic rotation in the world. Most of the experts obtain rotational components through observing deformation, theoretical analysis and calculation. The theory of elastic wave and source dynamics also prove the conclusion that the surface of the earth will rotate when an earthquake occurs. Based on a large number of investigations and experiments, a rotational acceleration sensor was developed for the observation of the rotational component of strong ground motions. This acceleration sensor is a double-pendulum passive servo large-damped seismic rotational acceleration sensor with the moving coil transducer. When an earthquake occurs, the seismic rotational acceleration acts on the bottom plate at the same time. The magnetic circuit system and the middle shaft fixedly connected to the bottom plate follow the bottom plate synchronous vibration, and the moving part composed of the mass ring, the swing frame and the moving ring produces relative corners to the central axis. The two working coils mounted on the two pendulums produce the same relative motion with respect to the magnetic gaps of the two magnetic circuits. Both working coils at this time generate an induced electromotive force by cutting magnetic lines of force in the respective magnetic gaps. The generated electromotive forces are respectively input to respective passive servo large damper dynamic ring transducer circuits and angular acceleration adjusting circuits, and the signals are simultaneously input to the synthesizing circuit after conditioning. Finally, the composite circuit outputs a voltage signal proportional to the seismic rotational acceleration to form a seismic rotational acceleration sensor. The paper presents the basic principles of the rotational acceleration sensor, including its mechanical structure diagram, circuit schematic diagram and mathematical models. The differential equation of motion and its circuit equation are derived to obtain the expressions of the main technical specifications, such as the damping ratio and sensitivity. The calculation shows that when the damping ratio is much larger than 1, the output voltage of the passive servo large damping dynamic coil transducer circuit is proportional to the ground rotation acceleration, and the frequency characteristic of bandpass is wider when the damping ratio is larger. Based on the calibration test, the dynamic range is greater than or equal to 100dB and the linearity error is less than 0.05%. The amplitude-frequency characteristics, the phase-frequency characteristics and their corresponding curves of the passive servo rotational acceleration sensor are acquired through the calculations. Based on the accurate measurement of the micro-vibration of the precision rotating vibration equipment, the desired result is obtained. The measured data are presented in the paper, which verify the correctness of the calculation result. The passive servo large damping rotational acceleration sensor has simple circuit design, convenient operation and high resolution, and can be widely applied to seismic acceleration measurement of earthquake or structure.  相似文献   

Evaluation of ASCE 7 equations for designing acceleration‐sensitive nonstructural components using data from instrumented buildings     

Hamidreza Anajafi  Ricardo A. Medina 《地震工程与结构动力学》2018,47(4):1075-1094

This study uses instrumented buildings and models of code‐based designed buildings to validate the results of previous studies that highlighted the need to revise the ASCE 7 F_p equation for designing nonstructural components (NSCs) through utilizing oversimplified linear and nonlinear models. The evaluation of floor response spectra of a large number of instrumented buildings illustrates that, unlike the ASCE 7 approach, the in‐structure and the component amplification factors are a function of the ratio of NSC period to the supporting building modal periods, the ground motion intensity, and the NSC location. It is also shown that the recorded ground motions at the base of instrumented buildings in most cases are significantly lower than design earthquake (DE) ground motions. Because ASCE 7 is meant to provide demands at a DE level, for a more reliable evaluation of the F_p equation, 2 representative archetype buildings are designed based on the ASCE 7‐16 seismic provisions and exposed to various ground motion intensity levels (including those consistent with the ones experienced by instrumented buildings and the DE). Simulation results of the archetype buildings, consistent with previous numerical studies, illustrate the tendency of the ASCE 7 in‐structure amplification factor, [1 + 2(z/h)] , to significantly overestimate demands at all floor levels and the ASCE 7 limit of to in many cases underestimate the calculated NSC amplification factors. Furthermore, the product of these 2 amplification factors (that represents the normalized peak NSC acceleration) in some cases exceeds the ASCE 7 equation by a factor up to 1.50.  相似文献   

强夯振动加速度的量测及现场试验研究   总被引：1，自引：0，他引：1       下载免费PDF全文

李盼盼  王家鼎  谷天峰  刘亚明 《地震工程学报》2018,40(1):166-170

结合延安新区强夯加固地基工程,进行强夯振动加速度测试现场试验。选取填方区场地,结合地形设计监测方案,以测试强夯波沿水平方向和斜坡的传播规律。在选定试验段的某级填方场地上布置多组加速度传感器,运用多个8通道24位高速采集卡记录强夯振动加速度在平面和斜坡的传播和衰减过程,探讨强夯振动波沿水平面和斜坡的传播规律以及能级对振动加速度的影响。结果表明:径向和竖向加速度值均随与夯点距离的增大而减小;在与夯击点距离相同处,强夯振动波沿水平方向传播的径向和竖向加速度值要大于沿斜坡方向;随着能级的增大,强夯产生的夯击波增强,在与夯击点相同距离处产生的径向和竖向加速度均明显增大。  相似文献   

建筑结构监测与抗震韧性评估     

王飞  康现栋  刘影  陈宏宇 《震灾防御技术》2022,17(3):569-578

建筑结构响应是有效反映结构动力特性的最直接参数,开展结构动力响应实时监测可为结构抗震韧性评估提供准确的地震动输入。本文基于非结构构件损失构建结构抗震韧性评估方法,研究确定位移敏感型和加速度敏感型非结构构件的易损性模型。选择某六层钢筋混凝土框架结构进行实时监测系统建设,基于监测数据开展结构抗震韧性评估。通过构建建筑信息模型（BIM）,并在有限元分析软件OpenSees中建立结构弹塑性分析模型,利用实时监测数据实现结构模型更新,直至监测数据与模型分析结果一致。由于实时监测数据峰值较低,结构不会发生塑性变形,因此选择10条双向非脉冲地震动模拟实时监测地震记录。根据层间位移角和楼面加速度分布,开展结构功能损失评估,得到该建筑结构的抗震韧性得分。分析表明,该结构抗震性能较好,在遭受地震破坏后,会发生非结构构件脱落,需要采取有效措施进一步提升建筑抗震韧性水平。  相似文献