太行山南端浅层速度结构成像和隐伏断裂探测   总被引：1，自引：0，他引：1  

徐增波  刘保金  姬计法  鄷少英  袁洪克  谭雅丽  王宏伟 《大地测量与地球动力学》2019,39(1):88-92

利用太行山南端的深地震反射剖面数据，运用初至波层析成像方法反演得到该区域的浅层P波速度结构和基底面展布形态，发现剖面浅部的P波速度变化与沉积盖层厚度和断裂分布有着较好的对应关系。利用跨断裂完成的浅层地震反射剖面，对区域内2条第四纪隐伏活动断裂进行高分辨率成像。结果表明，汤西断裂为东倾的正断层，控制汤阴地堑的西边界，活动年代为中更新世；汤东断裂为西倾的正断层，是汤阴地堑的主控边界断裂，活动年代为晚更新世。  相似文献   

Main active faults and seismic activity along the Yangtze River Economic Belt: Based on remote sensing geological survey     

《China Geology》2020,3(2):314-338

The Yangtze River Economic Belt (YREB) spans three terrain steps in China and features diverse topography that is characterized by significant differences in geological structure and present-day crustal deformation. Active faults and seismic activity are important geological factors for the planning and development of the YREB. In this paper, the spatial distribution and activity of 165 active faults that exist along the YREB have been compiled from previous findings, using both remote-sensing data and geological survey results. The crustal stability of seven particularly noteworthy typical active fault zones and their potential effects on the crustal stability of the urban agglomerations are analyzed. The main active fault zones in the western YREB, together with the neighboring regional active faults, make up an arc fault block region comprising primarily of Sichuan-Yunnan and a “Sichuan-Yunnan arc rotational-shear active tectonic system” strong deformation region that features rotation, shear and extensional deformation. The active faults in the central-eastern YREB, with seven NE-NNE and seven NW-NWW active faults (the “7-longitudinal, 7-horizontal” pattern), macroscopically make up a “chessboard tectonic system” medium-weak deformation region in the geomechanical tectonic system. They are also the main geological constraints for the crustal stability of the YREB.  相似文献   

冀中坳陷北部河西务断层结构及新近纪以来的活动特征分析          下载免费PDF全文

毛黎光  田建章  张宏伟  张传宝  王鑫  肖安成 《高校地质学报》2019,25(4):578

河西务断层是渤海湾盆地冀中坳陷北部地区一条重要的控盆断裂，新近纪-第四纪时期渤海湾盆地整体进入热沉降 阶段后，该断层仍然存在构造活动，2018年在河北永清县发生的地震就是由该断层的活动所引发。文章利用地震数据对河 西务断层的结构特征和新近纪以来的活动特征进行分析，结果表明，河西务断层新近纪以来具有右旋走滑的张扭特征，主 断层在剖面上具有负花状结构，平面上具有分段性，北段和南段兼具右旋走滑和拉张的特征，中段则主要表现为右旋走滑 特征。运动学模型表明，这种分段差异性主要由各段主断层走向和块体走滑运动方向的夹角所决定。  相似文献   

高分辨率反射波地震勘探在城市隐伏断裂探测中的应用——以成都天府新区苏码头断裂为例     

刘远志  刘胜  李大虎  夏友钢  李颖  周德帅 《大地测量与地球动力学》2019,39(9):910-915

采用“三小三高二绝招”的工作方法，通过静校正、多域多方法联合噪音衰减和精细的速度分析获得较高分辨率的地震时间剖面，揭示苏码头断裂的展布位置、构造形态及变形样式等。结果表明，区域构造以冲起式为主，在反冲断层与逆冲断层之间形成冲起构造或逆冲三角构造，在地震剖面上有明显的楔状特征。通过地震测线的断层走向以NE为主，倾向以SE为主，部分断层倾向为NW。  相似文献   

安宁河-则木河断裂带及周边地区Rayleigh波群速度背景噪声成像研究     

谭夏露  房立华  王未来  吴建平 《中国地震》2018,34(3):400-413

安宁河-则木河断裂带位于川滇地块、巴颜喀拉地块和华南地块的交接部位,是川滇菱形块体的东部重要边界。利用布设在安宁河-则木河断裂带周边区域的西昌台阵和川西台阵均历时两年、共187个宽频带地震台站的垂直分量的背景噪声数据,采用噪声层析成像方法获得了这一区域4~20s的Rayleigh波群速度分布图像。与前人研究相比,本文结果的横向分辨率有明显改进,在安宁河-则木河断裂带可达20km左右,在其它区域可以达到20~40km。成像结果表明,安宁河-则木河断裂地区上地壳的速度结构存在明显横向不均匀性,速度分布特征与地表地质构造基本一致,不同周期的速度分布变化较小。盐源盆地、西昌盆地和四川盆地西南缘表现为低速异常。九龙附近和南部的德昌-盐边-巧家附近表现为高速异常,分别与出露的花岗岩体和峨眉山玄武岩有关。在安宁河断裂南段和则木河断裂北段能观测到断裂两侧的速度存在明显差异,其余断裂带两侧的速度对比不明显。贡嘎山附近的中上地壳表现为明显的低速异常,其东侧和西南侧高速体的阻挡,以及鲜水河-安宁河断裂带走向的变化,在贡嘎山区形成一个挤压弯曲段,使得川滇菱形块体的东南向水平运动转换为垂直于断裂的挤压作用和垂直隆升,导致了贡嘎山的快速隆起。  相似文献   

淮南顾北矿F₁₀₄断层两侧岩溶水化学形成机制及导隔水性评价     

郑竹艳  许光泉  杨婷婷  余世滔  张海涛 《煤田地质与勘探》2020,48(1):129-137

利用断层两盘岩溶水化学特征判断其导隔水性对于我国华北型煤田水害防治具有十分重要的实践意义。以顾北矿F₁₀₄断层两侧太原组岩溶地下水为研究对象，在分析断层两盘水文地质条件基础上，采用Piper三线图、离子组合比和主成分法，分析了主要组分来源及水-岩作用差异性，并采用PHREEQC软件对岩溶地下水进行反向水化学模拟。结果表明:南北区岩溶水均存在方解石和白云石的溶解和沉淀现象，南区阳离子交换吸附和脱硫酸作用程度强于北区，而北区黄铁矿氧化和岩盐溶解作用较南区明显，南北两区水化学环境及水-岩作用存在显著差异，进而推断F₁₀₄断层具有较好的阻水性，且影响了其两侧的氧化-还原环境及温度差异，控制着地下水径流方向和水-岩作用程度。   相似文献   

APPLYING 3D INVERSION OF SINGLE-PROFILE MAGNETOTELLURIC DATA TO IDENTIFY THE SHADE AND YUNONGXI FAULTS          下载免费PDF全文

JIANG Feng  CHEN Xiao-bin  DONG Ze-yi  CUI Teng-fa  LIU Zhong-yin  WANG Pei-jie 《地震地质》2019,41(6):1444-1463

Many synthetic model studies suggested that the best way to obtain good 3D interpretation results is to distribute the MT sites at a 2D grid array with regular site spacing over the target area. However, MT 3D inversion was very difficult about 10 years ago. A lot of MT data were collected along one profile and then interpreted with 2D inversion. How to apply the state-of-the-art 3D inversion technique to interpret the accumulated mass MT profiles data is an important topic. Some studies on 3D inversion of measured MT profile data suggested that 2D inversions usually had higher resolution for the subsurface than 3D inversions. Meanwhile, they often made their interpretation based on 2D inversion results, and 3D inversion results were only used to evaluate whether the overall resistivity structures were correct. Some researchers thought that 3D inversions could not resolute the local structure well, while 2D inversion results could agree with the surface geologic features much well and interpret the geologic structures easily. But in the present paper, we find that the result of 3D inversion is better than that of 2D inversion in identifying the location of the two local faults, the Shade Fault(SDF)and the Yunongxi Fault(YNXF), and the deep structures. In this paper, we first studied the electrical structure of SDF and YNXF based on a measured magnetotelluric(MT) profile data. Besides, from the point of identifying active faults, we compared the capacity of identifying deep existing faults between 2D inversion models and 3D models with different inversion parameters. The results show that both 2D and 3D inversion of the single-profile data could obtain reasonable and reliable electrical structures on a regional scale. Combining 2D and 3D models, and according to our present data, we find that both SDF and YNXF probably have cut completely the high resistivity layer in the upper crust and extended to the high conductivity layer in the middle crust. In terms of the deep geometry of the faults, at the profile's location, the SDF dips nearly vertically or dips southeast with high dip angle, and the YNXF dips southeast at depth. In addition, according to the results from our measured MT profile, we find that the 3D inversion of single-profile MT data has the capacity of identifying the location and deep geometry of local faults under present computing ability. Finally, this research suggests that appropriate cell size and reasonable smoothing parameters are important factors for the 3D inversion of single-profile MT data, more specifically, too coarse meshes or too large smoothing parameters on horizontal direction of 3D inversion may result in low resolution of 3D inversions that cannot identify the structure of faults. While, for vertical mesh size and data error thresholds, they have limited effect on identifying shallow tectonics as long as their changes are within a reasonable range. 3D inversion results also indicate that, to some extent, adding tippers to the 3D inversion of a MT profile can improve the model's constraint on the deep geometry of the outcropped faults.  相似文献   

喜马拉雅地区与天山地区地壳强地震的孕震因素探讨     

陈应君 《中国地震》2019,35(2):305-318

利用哈佛大学GCMT数据中心和前人积累的历史地震资料(1962～2016年MW 4.0地震)以及Crust2.0地壳结构统计分析了喜马拉雅地区、天山地区的地壳区域构造与地震活动间的相关性。此外,利用GFZ地学研究中心提供的静态卫星重力模型GGM03S/EGM2008和地形模型Topo计算了2个地区的各类重力异常场,同时还模拟了不同地壳弹性参数下的重力异常场,结果表明喜马拉雅地区重力异常场在水平、垂直方向的梯度特征远大于天山地区的异常特征,且喜马拉雅地区的有效弹性板厚度T_e(6～15km)小于天山地区的有效弹性板厚度T_e(20～30km)。最后,利用喜马拉雅地区与天山地区的GPS震间三维形变场约束了断层运动模型,结果显示两者主前缘断裂的断层闭锁深度及应力积累状态存在较大的差异。因此认为,造成青藏高原及邻区的边界地壳区域地震活动性差异的动力学因素,与地壳有效弹性板厚度、孕震断层参数及区域应力积累状态等密切相关。  相似文献   

断层附近地应力扰动带宽度及其影响因素   总被引：3，自引：3，他引：0  

翁剑桥  曾联波  吕文雅  刘奇  祖克威 《地质力学学报》2020,26(1):39-47

在建立正断层模型的基础上，利用三维有限元数值模拟方法研究了断层附近地层中的地应力变化规律。其结果表明，由于断层活动，在断层附近普遍发育应力扰动带；在应力扰动带范围内，地应力方向和大小发生明显的变化，断层中部附近应力值普遍较低，而断层端部的应力值通常异常增大。应力扰动带的分布范围主要受断层规模的控制，与断裂带的岩石力学性质、断层走向、断层面形态和边界应力条件等因素也密切相关。随断层长度和断距逐步增大，应力扰动带的宽度相应增加。断裂带的岩石越破碎，其岩石弹性模量越低，断层对地应力的影响宽度越大。断层走向与区域最大水平主应力方向越接近垂直、断距与断层长度的比值越大，区域内的差应力越大，则扰动带宽度与断层规模的比值也越大。选择渤海湾盆地BZ-X油田进行验证，在建立油田实际三维地质模型基础上，根据边界应力条件，利用三维有限元方法对沙河街组二段的地应力分布进行了数值模拟计算。根据断层周围的地应力变化，确定了应力扰动带的分布范围，断层附近应力扰动带宽度的分布规律与正断层模型分析结果相一致。   相似文献   

塔北隆起X型走滑断裂成因机制的新解释     

黄少英  宋兴国  罗彩明  能源  马小丹  漆家福  陈石 《现代地质》2021,35(6):1797-1808

塔里木盆地塔北隆起发育两组呈小角度相交(40°)的透入性X型走滑断裂,分别沿着NNE走向和NNW延伸。在对塔北哈拉哈塘地区三维地震资料解释的基础上,对走滑断层的几何展布特征以及断层的剖面变形特征进行研究;同时重点解析了RP6断裂和HA13断裂,分析比较NNW向与NNE向断层的变形及发育特征差异;结合盆地重磁资料以及周缘造山带的活动特征,对塔北隆起小角度的X型走滑断层的发育机制以及演化进行了分析。研究表明,塔北隆起走滑断层在垂向上具有明显的分层变形特征,分为三个构造层:震旦系-中寒武统下构造层(TH₃界面以下)、上寒武统-中奥陶统中构造层(TH₃-TO₃t界面)和上奥陶统-石炭系上构造层(TO₃t-TP界面)。断层在下构造层和中构造层中整体处于压扭环境,多发育正花状构造;上构造层中断层主要发育负花状构造或正断层,整体处于张扭环境。两组断裂比较,NNW向断裂活动性强,在各构造层中均有显著的断裂特征发育,垂向连通性强,发育先存基底断裂,而NE向断层主要发育在中构造层,在下构造层和上构造层中断层发育不明显。活动性分析表明,断层的形成与演化具有多期性,走滑断层的形成经历了三期主要活动:中寒武世末、中晚奥陶世和志留纪-石炭纪。塔北隆起X型走滑断裂的形成受到了NNW向基底断裂和薄弱带的控制,NNW向先存基底断裂带或薄弱带优先发育走滑断裂,基底断裂与主挤压应力方向的夹角小于45°-Φ/2,NNE断层的发育受NNW向先存断裂限制,最终形成小角度相交的X型断裂。  相似文献