2018年9月8日墨江地震及周边地区构造应力场特征分析   总被引：1，自引：0，他引：1       下载免费PDF全文

李泽潇  万永革  崔华伟  李振月  胡晓辉  黄骥超  靳志同 《地球物理学报》2020,63(4):1431-1443

2018年9月8日,云南省墨江县发生MS5.9地震并伴随一系列余震,探究该地震周围的应力场对于理解该地震的发生机制和后续地震的发展趋势具有着重要的参考意义.本研究收集了震源及其邻区中前人研究和Global CMT所给出的震源机制资料,对该地区进行了构造应力场反演,并同时利用反演得到的应力张量模拟墨江地区的震源机制解表现.结果表明:(1)在应力轴整体分布上,自西向东σ1轴(压轴)从NNE-SSW向逐渐转向NNW-SSE向,σ3轴(张轴)从WWN-EES向逐渐转向WWS-EEN向,张轴呈弧形分布,压轴呈放射状分布.(2)在应力轴倾伏角上,研究区域内的压应力轴和张应力轴倾伏角都比较小,即两轴均接近水平.(3)R值分布大体是在东南部相较于西北部大,结合当地地质背景分析得到,物质逃逸自西北向东南呈逐渐变缓的趋势.(4)利用反演得到的应力张量和应力状态计算墨江地震震源区的相对剪应力和相对正应力大小.由此推测,墨江地震恰好发生在相对剪切应力值和相对正应力正值最大的节面上.从而可以确定墨江地震的发震节面的基本参数:走向216.32°,倾角86.91°,滑动角0.27°,相对剪应力值0.9,相对正应力值0.3.本研究为此次墨江地震的发震背景和地震动力学研究提供了基础性资料.  相似文献   

Investigating the vibration properties of integrated ceiling systems considering interactions with surrounding equipment     

Liangjie Qi  Keiichiro Kunitomo  Masahiro Kurata  Yoshiki Ikeda 《地震工程与结构动力学》2020,49(8):772-793

Studies on recent earthquakes highlighted that buildings with minimal structural damage still suffer from extensive damage and failure of nonstructural components. The dropping and damage of suspended ceiling systems, which typically consist of acceleration-sensitive nonstructural elements, resulted in lengthy functional disruptions and extended recovery time. This article experimentally and analytically examined the vibration properties of an integrated ceiling system considering the interactions with surrounding electrical equipment. The theoretical stiffness and corresponding frequency of electrical equipment were initially derived and then verified by subsequent vibration tests and numerical analyses. The seismic performance of the air conditioner (AC) was evaluated with different installment configurations based on design spectra and floor response spectra. Vibration tests of the suspended integrated ceiling system considering the interactions with surrounding equipment showed that the inclusion of peripheral constraints increased the first horizontal vibration frequency of the ceiling system by a factor of approximately 6. The natural frequencies of all components in the integrated ceiling system were almost identical, which was attributed to the coupled behavior between the ceiling panels and surrounding equipment, emphasizing the effect of interactions between adjacent components during dynamic analysis. Based on the above experimental investigation, an associated numerical model of the integrated ceiling system was created. Finally, corresponding parametric studies that included the interactions with surrounding equipment, reinforcing braces of ACs and strengthening members at the rise-up location between two elevations were performed.  相似文献   

Bidirectional shaking table tests of a low-cost friction sliding system with flat-inclined surfaces     

Miguel B. Brito  Mitsuyoshi Akiyama  Yoshitaka Ichikawa  Hiroki Yamaguchi  Riki Honda  Naomitsu Ishigaki 《地震工程与结构动力学》2020,49(8):817-837

A novel low-cost friction sliding system for bidirectional excitation is developed to improve the seismic performance of reinforced concrete (RC) bridge piers. The sliding system is a spherical prototype developed by combining a central flat surface with an inclined spherical segment, characterized by stable oscillation and a large reduction in response accelerations on the flat surface. The inclined part provides a restoring force that limits the residual displacements of the system. Conventional steel and concrete are employed to construct a flat-inclined spherical surface atop an RC pier. The seismic forces are dissipated through the frictions generated during the sliding movements; hence, the seismic resilience of bridges can be ensured with a low-cost design solution. The proposed system is fabricated utilizing a mold created by a three-dimensional printer, which facilitates the use of conventional concrete to construct spherical shapes. The concrete surface is lubricated with a resin material to prevent abrasion from multiple input ground motions. To demonstrate the effectiveness of the system, bidirectional shaking table tests are conducted in the longitudinal and transverse directions of a scaled bridge model. The effect of the inclination angle and the flat surface size is investigated. The results demonstrate a large decrease in response acceleration when the system exhibits circular sliding displacement. Furthermore, the inclination angle that generates the smallest residual displacement is identified experimentally.  相似文献   

柱顶层间隔震体系增量动力响应研究          下载免费PDF全文

袁梦醒  陈望  刘彦辉  谭平  金建敏 《地震工程学报》2020,42(4):872-880

针对悬臂柱顶有拉梁和无拉梁层间隔震体系的抗震性能问题,运用增量动力分析(IDA)方法进行弹塑性分析,模拟结构从弹性到弹塑性直至最后倒塌的全过程。通过调幅地震动得到相应的层间位移角及峰值加速度,分别绘制单条与多条IDA曲线分析拉梁对隔震结构动力响应的影响,研究两种结构的抗震性能。结果表明:在相同性能点,有拉梁和无拉梁对纤维铰弯矩值和曲率值基本无影响,而在不同性能点,纤维铰状态明显不同;两种体系从正常使用阶段到防止倒塌阶段所需的加速度峰值的差距慢慢增大;在极罕遇地震下,柱顶有拉梁层间隔震体系的下部结构抗震性能要高于柱顶无拉梁层间隔震体系。  相似文献   

结合变差纹理特征的极化SAR建筑物震害信息提取          下载免费PDF全文

肖修来  翟玮  郭晓  张皓然 《地震工程学报》2020,42(2):568-578

快速评估建筑物地震灾害信息对地震应急救援工作有着指导意义,而极化SAR具有全天候、全天时的特点,因此利用极化SAR图像提取震害信息已逐渐成为研究热点。虽然极化SAR具有丰富的极化信息,但其纹理信息不可忽略,尤其是完好的人工建筑物在图像上呈现规则的纹理特征,而倒塌建筑区域纹理分布杂乱,因此结合纹理信息也可以很好地提取建筑物信息。以2010年玉树地区的全极化SAR数据为研究对象,首先,利用Yamaguchi分解的体散射分量PV提取了SAR图像中的建筑物区域以及道路、水系等非建筑物信息,在此基础上,对相干散射矩阵T11分量中倒塌建筑物、完好建筑区域进行变差计算,根据变差曲线确定变程a后,再对建筑物区域采取窗口m*m(m=3*a)进行变差计算得到变差纹理信息,最后利用FCM算法对变差纹理信息分别提取完好建筑物和倒塌建筑物区域,为了对比分析,文章利用Yamaguchi分解的二次散射分量PD提取完好建筑物区域,与震后光学遥感图像对应样本点进行人工验证,得到完好建筑物的提取精度为80.18%,倒塌建筑物的提取精度为84.54%,道路水系的提取精度为77.58%。  相似文献   

基于已知特征平面的移动测量系统安置参数检校     

张顺  张帆  李珂 《北京测绘》2020,(3):437-442

安置误差是影响移动测量系统激光点云精度的主要因素之一。当激光点云中存在特征平面时,安置误差会导致该平面与真实平面之间产生较大的偏差,如果存在多个空间上位置关系较好的特征平面,就能够全面反映出系统的安置误差。本文以此为依据,给出了一种基于已知特征平面的移动测量系统安置参数检校方法,并详细阐述了检校场的布设、数据获取及处理等内容。实验证明,该方法是一种简单、可靠的检校方法,具有较高的实用性。  相似文献   

eLoran系统新型信号波形设计及其性能评估          下载免费PDF全文

李婉清  刘中伟  李实锋  叶清琳 《全球定位系统》2020,45(2):13-20

增强型罗兰导航系统(eLoran)作为全球卫星导航系统(GNSS)的备份系统,是国家定位导航授时(PNT)安全的重要基础设施.针对目前标准eLoran信号存在易受交叉干扰、天波干扰,通信数据传输速率低等的问题,本文基于标准罗兰信号体制提出了两种波形改进方法(衰减函数法与对称波形法)并对新型波形进行性能评估.实验结果表明,两种方法能够有效缩短波形持续时间,加速后沿波形下降,减小发射机功耗.对称波形法能够大幅减小波形持续时间,但缩短波形持续时间也将改变原信号波形的频谱特性,利用衰减函数法可以最大程度保证信号的频谱性能.综合分析可知,新型波形能够有效利用时域资源,空余的时间可用于增加传输信号,进而提高数据调制技术的性能.  相似文献   

Integrating spectral and non-spectral data to improve urban settlement mapping in a large Latin-American city     

Feilin Lai 《地理信息系统科学与遥感》2020,57(6):830-844

ABSTRACT

Information on urban settlements is crucial for sustainability planning and management. While remote sensing has been used to derive such information, its applicability can be compromised due to the complexity in the urban environment. In this study, we developed a remote sensing method to map land cover types in a large Latin-American city, which is well known for its mushrooming unplanned and informal settlements. After carefully considering the landscape complexity there, we designed a data fusion method combining multispectral imagery and non-spectral data for urban and land mapping. Specifically, we acquired a cloud-free Landsat-8 image and two non-spectral datasets, i.e., digital elevation models and road networks. Then, we implemented a set of experiments with different inputs to evaluate their merits in thematic mapping through a supervised protocol. We found that the map generated with the multispectral data alone had an overall accuracy of 73.3% but combining multispectral imagery and non-spectral data yielded a land cover map with 90.7% overall accuracy. Interestingly, the thermal infrared information helped substantially improve both the overall and categorical accuracies, particularly for the two urban classes. The two types of non-spectral data were critical in resolving several spectrally confused categories, thus considerably increasing the mapping accuracy. However, the panchromatic band with higher spatial resolution and its derived textural measurement only generated a marginal accuracy improvement. The novelties of our work are with the successful separation between the two major types of urban settlements in a complex environment using a carefully designed data fusion approach and the insight into the relative merits of the thermal infrared information and non-spectral data in helping resolve the issue of class ambiguity. These findings should be valuable in deriving accurate urban settlement information which can further advance the research on socio-ecological dynamics and urban sustainability.  相似文献   

东北三省全面振兴的社会经济支撑能力评估     

马丽  田华征  康蕾  戚伟 《地理科学》2020,40(6):863-873

在解析支撑能力和东北问题特点的基础上，从“创新、协调、绿色、开放、共享”五大理念出发建立全面振兴社会经济支撑能力评价指标体系和综合评价方法，以地级市为单元对东北三省进行评估。研究发现：各地市社会经济支撑能力差异显著，哈大沿线核心城市的支撑能力较强，西翼城市以及朝阳、七台河、绥化、葫芦岛、铁岭、双鸭山和鹤岗等资源型城市支撑能力较弱。因此未来东北地区在振兴政策的区域分布上应有所侧重，对不同地区施以不同的振兴或扶持政策。在创新、绿色、开放方面需要集中力量重点突破，而在体制机制改革和共享服务建设方面需要全面覆盖，并重点加强黑龙江北部和辽宁、吉林西翼城市的共享能力建设。  相似文献   

中国区域水资源系统韧性与效率的发展协调关系评价   总被引：1，自引：0，他引：1  

孙才志  孟程程 《地理科学》2020,40(12):2094-2104

在界定水资源系统韧性概念的基础上，综合应用赋权法、SBM-DEA模型及发展协调度模型对2000—2016年全国31个省区的区域水资源系统的效率、韧性以及两者之间的发展协调关系进行评价。结果如下：① 中国区域水资源系统效率整体上处于非有效区，在研究期间呈现出在波动中上升的趋势。② 中国区域水资源系统韧性的平均值为0.39，总体水平较低，研究期间整体上呈波动上升趋势。③ 中国区域水资源系统效率与韧性的发展度总体呈现平稳上升—较快上升—急剧下降—上升的趋势，呈倒“U”型发展；协调度在研究期间呈现波动中上升趋势，大部分省区的发展度较好，而协调度较弱。④ 2000—2016年，水资源效率与韧性的发展协调度一直维持着“东?中?西”阶梯式递减格局，失调省区的数量降低，初级协调、中级协调、良好协调省区的数量逐渐提升，整体向协调趋势发展；空间格局上呈现由2000年倒“E”型对称式分布格局向如今北部围绕天津、中部围绕上海、南部围绕广东的三级格局演变，格局分布与中国三大经济区基本吻合，可知中国水资源系统效率与韧性的发展协调水平与经济发展水平之间有明显的关系。  相似文献