柱顶层间隔震体系增量动力响应研究          下载免费PDF全文

袁梦醒  陈望  刘彦辉  谭平  金建敏 《地震工程学报》2020,42(4):872-880

针对悬臂柱顶有拉梁和无拉梁层间隔震体系的抗震性能问题,运用增量动力分析(IDA)方法进行弹塑性分析,模拟结构从弹性到弹塑性直至最后倒塌的全过程。通过调幅地震动得到相应的层间位移角及峰值加速度,分别绘制单条与多条IDA曲线分析拉梁对隔震结构动力响应的影响,研究两种结构的抗震性能。结果表明:在相同性能点,有拉梁和无拉梁对纤维铰弯矩值和曲率值基本无影响,而在不同性能点,纤维铰状态明显不同;两种体系从正常使用阶段到防止倒塌阶段所需的加速度峰值的差距慢慢增大;在极罕遇地震下,柱顶有拉梁层间隔震体系的下部结构抗震性能要高于柱顶无拉梁层间隔震体系。  相似文献   

两株南极枝孢霉属真菌Cladosporium sp.NJF4和NJF6的次级代谢产物研究          下载免费PDF全文

常俊男  田晓清  樊成奇  黄金昌  陆亚男  韩清华 《极地研究》2020,32(1):60-67

南极因其独特的自然环境成为潜在、重要的微生物资源库,是产生新型生物活性物质和先导化合物菌株的潜在种源地,南极微生物正在成为创新药物研究新的重要资源。虽然近年来对南极微生物次级代谢产物的研究逐渐增加,但与温带和热带微生物研究相比仍处于初级阶段。对从南极普里兹湾海洋沉积物中获得的两株枝孢霉属真菌Cladosporium sp. NJF4和NJF6进行次级代谢产物分离及结构鉴定,获得20个化合物。化合物结构类型包括甾醇(1)、倍半萜类(7—8)、生物碱类(9—14)、二酮哌嗪(2—5、15—17)、芳香酸(6、18—19)等,其中倍半萜类(7—8)为首次从枝孢霉属真菌中分离得到,以上研究将为丰富南极微生物次级代谢产物库奠定一定的研究基础。  相似文献   

建设韧性城乡的技术途径   总被引：1，自引：1，他引：0  

郭迅  王波 《震灾防御技术》2019,14(1):52-59

中国地震多发、灾害严重，迫切需要提升抗震能力，实现韧性城乡的建设。本文围绕建设韧性城乡的技术途径，梳理了工程抗震技术发展的历史沿革，阐述了韧性城乡的提出背景。基于震害类比、实验验证和理论分析，总结提炼工程结构抗震能力“散”、“脆、”偏、“单”评估法，指出应以“整而不散”、“延而不脆”、“匀而不偏”、“冗而不单”的传统抗震技术及隔震与消能减震新技术作为实现韧性城乡的技术途径。  相似文献   

A Revisited Purification of Li for ‘Na Breakthrough’ and its Isotopic Determination by MC‐ICP‐MS     

Lin Xu  Chongguang Luo  Hanjie Wen 《Geostandards and Geoanalytical Research》2020,44(1):201-214

The accurate and precise determination of Li isotopic composition by MC‐ICP‐MS suffers from the poor performance of traditional column chromatography. Previously established chromatographic processes cannot completely remove Na in complex geological samples, which is currently interpreted to be a result of Na breakthrough. In this study, Na breakthrough during single‐column purification was found to differ between simply artificial Na‐containing sample solutions, where a little Na residue was found, and silicate rocks, where a large amount of breakthrough occurred. A revised two‐step column purification for Li using 0.5 and 0.3 mol l^?1 HCl as eluents was designed to remove the Na. This modified method achieves high‐efficiency Li purification from Na and consequently avoiding high Na/Li ratio interference for subsequent MC‐ICP‐MS analyses. The proposed method was validated by the analysis of a series of reference materials, including Li₂CO₃ (IRMM‐016, ‐0.10‰), basalt (BCR‐2: 2.68‰; BHVO‐2: 4.39‰), andesite (AGV‐2: 6.46‰; RGM‐2: 2.59‰), granodiorite (GSP‐2: ?0.87‰) and seawater (CASS‐5, 30.88‰). This work reports early Na appearance prior to the elution curves in chromatography and emphasises its influence for subsequent Li isotope measurement. Based on the findings, the established two‐step method would be more secure than single‐column chemistry for Li purification.  相似文献   

利用惯容隔震系统的结构层间隔震研究          下载免费PDF全文

张瑞甫  吴明瑞  周方圆  吴应雄  江洁玲 《世界地震工程》2020,(4):008-16

层间隔震技术对于结构竖向不规则以及结构增层等状况有良好的适用性。然而，层间隔震可能出现的较大隔震层变形会带来结构设计的困难。通过在隔震层中设置阻尼元件可以减少变形，但是过大的阻尼出力和过多的数量需求可能导致空间布置和安装不便。惯容元件为解决以上问题提供了一种新的途径。该研究提出采用惯容隔震系统作为层间隔震提高能量耗散效率的手段以控制地震响应，同时也给出了基于性能需求的惯容层间隔震的参数优化设计方法。并以一个标准钢结构模型验证了方法的有效性。结果表明:惯容元件的使用显著降低了上部子结构的地震响应和隔震层的变形，惯容系统实现了预期的耗能增效作用。  相似文献   

钢筋-沥青隔震层非线性震动特性研究          下载免费PDF全文

尚守平  刘水 《世界地震工程》2019,35(1):001-8

为了研究钢筋-沥青隔震层的材料与几何非线性震动特性，对钢筋-沥青隔震结构进行了振动台试验，分析了结构在不同加速度幅值输入时的隔震性能。同时，在钢材的应力-应变关系基础上，考虑构件竖向力的二次矩效应，提出了钢筋-沥青隔震层骨架曲线的计算方法，并结合双线型恢复力模型的滞回规则，建立了相应的恢复力模型。利用建立的恢复力模型，编制程序进行了弹塑性时程分析，并与试验结果作对比。结果表明:当钢筋-沥青隔震层的受力钢筋进入弹塑性阶段时，隔震层能够吸收大部分地震能量，显著降低上部结构的地震反应；弹塑性时程分析结果与试验结果吻合较好，由此建立的恢复力模型准确并且适用，可为钢筋-沥青隔震层的工程设计与非线性地震反应分析提供参考。  相似文献   

季冻土区临水内、外拱护墙结构冻胀特征分析及治理     

孙洪伟  翟利杰  任望忠  傅汝进 《吉林大学学报(地球科学版)》2020,50(6):1833-1843

为厘清季冻土区临水内、外拱护墙结构冻胀平位移冻害机理，测试隔离层防冻害装置的有效性，在20101110-20110531、20131110-20140531、20171110-20180531三个观测年内，以长春某湖泊临水内、外拱护墙结构为研究对象，选择内、外拱护墙结构和设隔离层防冻害装置的试验内拱护墙结构三者相对比，用钢尺量距法观测三者寒期的平位移状态。结果表明：内拱护墙结构出现倾斜、裂缝导致的内向冻胀平位移冻害，其内向平位移曲线随气温均呈"半驼峰型"，对应观测年持续降温-持续低温-持续升温-正温时段，内向冻胀平位移呈减小-增大-减小-稳定残余的位移运动，诱因是平冻胀应力的生成-增长-减弱-消失作用；外拱护墙结构出现较小的外向冻胀平位移，外向冻胀平位移曲线均呈"波浪型"，无冻害发生，冰凸拱平冻胀应力推动外拱护墙结构压缩冻土凹拱形成外向冻胀平位移，冻土凹拱限制了外向冻胀平位移发展；设隔离层防冻害装置的试验内拱护墙结构未发生平位移冻害，其内向冻胀平位移较自然冻胀的内拱护墙结构减小83.92%，较外拱护墙结构减小51.74%，表明隔离层防冻害装置防治冻胀平位移冻害有效。  相似文献   

Response of hybrid isolation system during a shake table experiment of a full‐scale isolated building     

Keri L. Ryan  Taichiro Okazaki  Camila B. Coria  Eiji Sato  Tomohiro Sasaki 《地震工程与结构动力学》2018,47(11):2214-2232

A full‐scale 5‐story steel moment frame building was subjected to a series of earthquake excitations using the E‐Defense shake table in August, 2011. For one of the test configurations, the building was seismically isolated by a hybrid system of lead‐rubber bearings and low friction roller bearings known as cross‐linear bearings, and was designed for a very rare 100 000‐year return period earthquake at a Central and Eastern US soil site. The building was subject to 15 trials including sinusoidal input, recorded motions and simulated earthquakes, 2D and 3D input, and a range of intensities including some beyond the design basis level. The experimental program was one of the first system‐level full‐scale validations of seismic isolation and the first known full‐scale experiment of a hybrid isolation system incorporating lead‐rubber and low friction bearings. Stable response of the hybrid isolation system was demonstrated at displacement demands up to 550 mm and shear strain in excess of 200%. Torsional amplifications were within the new factor stipulated by the code provisions. Axial force was observed to transfer from the lead‐rubber bearings to the cross‐linear bearings at large displacements, and the force transfer at large displacements exceeded that predicted by basic calculations. The force transfer occurred primarily because of the flexural rigidity of the base diaphragm and the larger vertical stiffness of the cross‐linear bearings relative to the lead‐rubber bearings.  相似文献   

Holocene relative sea level history and Storegga tsunami run‐up in Lyngen,northern Norway          下载免费PDF全文

Henrik Rasmussen  Stein Bondevik  Geoffrey D. Corner 《第四纪科学杂志》2018,33(4):393-408

  相似文献   

Effects of the improper modeling of viscous damping on the first-mode and higher-mode dominated responses of base-isolated buildings     

Hamidreza Anajafi  Ricardo A. Medina  Erin Santini-Bell 《地震工程与结构动力学》2020,49(1):51-73

In many finite element platforms, a classical global damping matrix based on the elastic stiffness of the system (including isolators) is usually developed as part of the solution to the equations of motion of base-isolated buildings. The conducted analytical and numerical investigations illustrate that this approach can lead to the introduction of unintended damping to the first and higher vibration modes and the spurious suppression of the respective structural responses. A similar shortcoming might be observed even when a nonclassical damping model (ie, an assembly of the superstructure and isolation system damping sub-matrices) is used. For example, the use of Rayleigh damping approach to develop the superstructure damping sub-matrix can lead to the undesired addition of damping to the isolated mode arising from the mass-proportional component of the superstructure damping. On the other hand, the improper use of nonclassical stiffness-proportional damping (eg, determining the proportional damping coefficient, β_k , based on the first mode) can result in assigning significant damping to the higher-modes and the unintended mitigation of the higher-mode responses. Results show that a nonclassical stiffness-proportional model in which β_k is determined based on the second modal period of a base-isolated building can reasonably specify the intended damping to the higher modes without imparting undesirable damping to the first mode. The nonclassical stiffness-proportional damping can be introduced to the numerical model through explicit viscous damper elements attached between adjacent floors. In structural analysis software such as SAP2000®, the desired nonclassical damping can be also modeled through specifying damping solely to the superstructure material.  相似文献